ADM Performance Highflow Intake Advantages - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ADM PERFORMANCE · 09-13-2009, 04:44 PM

I put together a small list of reasons why our Intake has benefits of other designs.I made this available to aid in those not sure about what they are buying or looking to buy.I hope this helps you in your decision as we aim to please each and every style of customer from the basic bolt on to the most extreme power level customer.

ADM Performance Intake – Benefits

Benefit #1
Powder Coated finish of exposed aluminum parts.

Benefit #2
Lightweight aluminum parts and pieces. Aircraft quality stainless screws and fasteners.

Benefit #3
MAF/IAT sensor is relocated into the airbox itself, out of the engine bay hot air environment.
This permits the ECM to read cooler temps which translates into increased timing and more
power without triggering any knock retard. Increased timing means more horsepower.

Benefit #4
The ADM airbox location permits cooler air to be ingested from the factory scoop located
behind the grill on the driver side as well as around the washer bottle and fender well... Not
from the hot engine bay area.

Benefit #5
Future upgrading to turbos, superchargers, etc can still utilize the ADM intake system. This
means that no money is wasted now as this system has more flexability than many others.
So as you consider added engine mods in the future this intake system can remain in your car.

Benefit #6
Should you choose to de-mod your vehicle in the future most all of the parts can be utilized in
future applications. The ADM filter is a 4” universal type not specific to this intake only. The
ADM silicone couplers can be used on other custom applications as well. Even the exclusive
6061 100mm MAF housing is universal and could be used on other applications.

Benefit#7
ADM uses a Full 4” 100mm ID system from the filter to the throttlebody.

Benefit #8
The availibity for a “FULL RACE VERSION” which enhances the factory ducting system to TRAP and DIRECT a cold air stream directly into the SEALED AIR BOX

STANDARD STREET KIT INSTALLED ON A MAGGIE S/C CAR -

ADM PERFORMANCE · 09-13-2009, 05:42 PM

Here are what some of the parts look like un installed -

T-6061 Aluminum 100mm Maf Housing

High Quality 100mm Silicone Hose

100MM Mandrel Bent .062 wall T-6061 Pipe

Aircraft Grade Stainless steel hardware

Black Powder Coated CNC Cut T-6061 Aluminum Airlid with Edgeseal

Black Powder Coated CNC Cut T-6061 Aluminum Side Panel With Edgeseal

freemaSSon · 09-13-2009, 05:54 PM

"ENGINEERED to EXCEL"

The planning, engineering and execution of this airbox has to be one of the best products I have seen you put together, brother. I’ve been around to see A LOT of things you imagined then planned, engineered and executed. This airbox has to rank towards the top of all the things I’ve witnessed.

The results on the dyno and by some members at the track is CLEAR evidence that it just plain works. PERIOD!

Melson · 09-13-2009, 06:01 PM

Quote:

Originally Posted by freemaSSon

"ENGINEERED to EXCEL"

The planning, engineering and execution of this airbox has to be one of the best products I have seen you put together, brother. I’ve been around to see A LOT of things you imagined then planned, engineered and executed. This airbox has to rank towards the top of all the things I’ve witnessed.

The results on the dyno and by some members at the track is CLEAR evidence that it just plain works. PERIOD!

ADM PERFORMANCE · 09-13-2009, 06:39 PM

Quote:

Originally Posted by Melson

I agree... with both.This system is leaps and bounds better than our Trailblazer SS systems that dominated that market.

Thanks guys
Andy

Number_9 · 09-13-2009, 07:00 PM

Quote:

Originally Posted by freemaSSon

"ENGINEERED to EXCEL"

The planning, engineering and execution of this airbox has to be one of the best products I have seen you put together, brother. I’ve been around to see A LOT of things you imagined then planned, engineered and executed. This airbox has to rank towards the top of all the things I’ve witnessed.

The results on the dyno and by some members at the track is CLEAR evidence that it just plain works. PERIOD!

x2

Props to ADM Performance...

I am loving the performance improvement and it looks good too.

Mike TexaSS · 09-13-2009, 07:41 PM

Fit and finish was top notch! When I opened the box the 100mm maf housing was a bonus!

pharmd · 09-13-2009, 08:04 PM

Could you retrofit this to a TBSS...how hard would it be for you to create "this" type of system for the TBSS?

ADM PERFORMANCE · 09-14-2009, 06:12 AM

Quote:

Originally Posted by pharmd

Could you retrofit this to a TBSS...how hard would it be for you to create "this" type of system for the TBSS?

Every part but the box.

ADM PERFORMANCE · 09-14-2009, 06:14 AM

Quote:

Originally Posted by Mike TexaSS

Fit and finish was top notch! When I opened the box the 100mm maf housing was a bonus!

Exactly!

Crowley · 09-14-2009, 08:43 AM

Quote:

Originally Posted by freemaSSon

"ENGINEERED to EXCEL"

The planning, engineering and execution of this airbox has to be one of the best products I have seen you put together, brother. I’ve been around to see A LOT of things you imagined then planned, engineered and executed. This airbox has to rank towards the top of all the things I’ve witnessed.

The results on the dyno and by some members at the track is CLEAR evidence that it just plain works. PERIOD!

2010 2-Tone · 09-14-2009, 08:51 AM

This is the unit I will be going with in the next 2 weeks. Looks like it is head and shoulders above the comp.

Andy, How much shipped?

2010 2-Tone · 09-14-2009, 09:05 AM

Andy,
Is this a dry or wet filter?

madmaxx18 · 09-14-2009, 10:19 AM

I also am curious to know does it fit good or does it have gaps like the others I'm seeing. Veraram and roto fab both have gaps and are not sealed nearly as well as I would like to have seen them fit. All the pics show gaps at both corners. The silicone tubing looks like a condum LOL. Other than that it looks like a very nice setup.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LS3 engine specifications	Tran	Wiki	3	10-06-2010 10:56 PM
ADM Performance CAI Installed and Rocking!	Number_9	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	3	09-13-2009 08:50 AM
Teaser pics of the TVS 2300 and ADM Street Intake	Crowley	Camaro Photos \| Spyshots \| Video \| Media Gallery	9	08-22-2009 10:44 PM
Hardcore racers rejoice!! GM Performance Parts to offer new Camaro body in white	radz28	5th Gen Camaro SS LS LT General Discussions	23	12-22-2008 09:57 AM
existing LS3 tuners	themossman	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	7	10-30-2008 12:53 AM

09-13-2009, 04:44 PM	#1
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	ADM Performance Highflow Intake Advantages I put together a small list of reasons why our Intake has benefits of other designs.I made this available to aid in those not sure about what they are buying or looking to buy.I hope this helps you in your decision as we aim to please each and every style of customer from the basic bolt on to the most extreme power level customer. ADM Performance Intake – Benefits Benefit #1 Powder Coated finish of exposed aluminum parts. Benefit #2 Lightweight aluminum parts and pieces. Aircraft quality stainless screws and fasteners. Benefit #3 MAF/IAT sensor is relocated into the airbox itself, out of the engine bay hot air environment. This permits the ECM to read cooler temps which translates into increased timing and more power without triggering any knock retard. Increased timing means more horsepower. Benefit #4 The ADM airbox location permits cooler air to be ingested from the factory scoop located behind the grill on the driver side as well as around the washer bottle and fender well... Not from the hot engine bay area. Benefit #5 Future upgrading to turbos, superchargers, etc can still utilize the ADM intake system. This means that no money is wasted now as this system has more flexability than many others. So as you consider added engine mods in the future this intake system can remain in your car. Benefit #6 Should you choose to de-mod your vehicle in the future most all of the parts can be utilized in future applications. The ADM filter is a 4” universal type not specific to this intake only. The ADM silicone couplers can be used on other custom applications as well. Even the exclusive 6061 100mm MAF housing is universal and could be used on other applications. Benefit#7 ADM uses a Full 4” 100mm ID system from the filter to the throttlebody. Benefit #8 The availibity for a “FULL RACE VERSION” which enhances the factory ducting system to TRAP and DIRECT a cold air stream directly into the SEALED AIR BOX STANDARD STREET KIT INSTALLED ON A MAGGIE S/C CAR - Last edited by ADM PERFORMANCE; 10-03-2009 at 06:06 PM.

09-13-2009, 05:42 PM	#2
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	A few pics of our components Here are what some of the parts look like un installed - T-6061 Aluminum 100mm Maf Housing High Quality 100mm Silicone Hose 100MM Mandrel Bent .062 wall T-6061 Pipe Aircraft Grade Stainless steel hardware Black Powder Coated CNC Cut T-6061 Aluminum Airlid with Edgeseal Black Powder Coated CNC Cut T-6061 Aluminum Side Panel With Edgeseal Last edited by ADM PERFORMANCE; 10-07-2009 at 09:15 PM.

09-13-2009, 05:54 PM	#3
freemaSSon Pat @ ADM PERFORMANCE Drives: CGM SS/RS M6 Join Date: Aug 2009 Location: Prosper, TX Posts: 506	"ENGINEERED to EXCEL" The planning, engineering and execution of this airbox has to be one of the best products I have seen you put together, brother. I’ve been around to see A LOT of things you imagined then planned, engineered and executed. This airbox has to rank towards the top of all the things I’ve witnessed. The results on the dyno and by some members at the track is CLEAR evidence that it just plain works. PERIOD! __________________ "old age and treachery will always overcome youth and ambition" author unknown "There are two types of racers: cheaters...and losers." Smokey Yunick

09-13-2009, 07:41 PM	#7
Mike TexaSS Drives: 454 LS7 Camaro SS Join Date: Jun 2009 Location: Houston Posts: 380	Fit and finish was top notch! When I opened the box the 100mm maf housing was a bonus!

09-13-2009, 08:04 PM	#8
pharmd Master of Medicine Drives: 4th Gen Join Date: Oct 2008 Location: Kentucky Posts: 784	Could you retrofit this to a TBSS...how hard would it be for you to create "this" type of system for the TBSS? __________________ 2002 Camaro SS. 408 LS2. 500+RWHP/480RWTQ. Full UMI RR suspension. Koni/Strano. 295F/315R. 3500#(55/45)

09-14-2009, 08:51 AM	#12
2010 2-Tone Drives: 2010 RY 2SS with Custom Stripes Join Date: Mar 2009 Location: Jennings, La. Posts: 2,220 View My Garage	This is the unit I will be going with in the next 2 weeks. Looks like it is head and shoulders above the comp. Andy, How much shipped?

09-14-2009, 09:05 AM	#13
2010 2-Tone Drives: 2010 RY 2SS with Custom Stripes Join Date: Mar 2009 Location: Jennings, La. Posts: 2,220 View My Garage	Andy, Is this a dry or wet filter?

09-14-2009, 10:19 AM	#14
madmaxx18 Drives: 07_tundra/08_zo6 Join Date: Jun 2009 Location: Wichita falls, tx Posts: 722	I also am curious to know does it fit good or does it have gaps like the others I'm seeing. Veraram and roto fab both have gaps and are not sealed nearly as well as I would like to have seen them fit. All the pics show gaps at both corners. The silicone tubing looks like a condum LOL. Other than that it looks like a very nice setup.