FS: BTR Stage 4 Cam *NEW*, cam swap parts and others - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

spadz93 · 08-05-2016, 12:57 PM

Parts listed below, ALL PARTS NEW IN BOX pics on interest, all prices shipped, but make offers:

SOLD:
BMR BK024 Rear Subframe Urethane Mounts (Pro Version) SOLD
MELLING HIGH VOLUME, HIGH PRESSURE OIL PUMP 10296 SOLD
BTR LS3 Stg IV Cam 233/248 .619"/.595" 113+5 Cam SOLD
CHEVROLET PERFORMANCE 3 BOLT 4 POLE CAM GEAR 58X 12586481 SOLD
CHEVROLET PERFORMANCE LS2 LS3 LS7 TIMING CHAIN DAMPENER 12588670 SOLD
KATECH C5-R TIMING CHAIN FOR GEN III/IV LSX HME-G68V-2 SOLD
ARP CRANKSHAFT DAMPER BOLT FOR LS ENGINES 234-2503 SOLD
ARP CAM BOLTS FOR 3 BOLT LS CAMS 134-1003 SOLD
(1) BTR33904 Front Timing Cover Gasket SOLD
(1) BTR85673 Timing Cover Damper Seal SOLD
(2) BTR30223 Water Pump Gaskets SOLD
COMP CAMS TRUNION UPGRADE Kit SOLD
BMR TR002 Rear Toe Links w/ Polyurethane (Red Powdercoat) SOLD
ATI SUPER DAMPER UDP 10% #918629 SOLD

1968firebirdls3 · 08-05-2016, 09:14 PM

Would you be willing to sell the cam alone?

XxScottxXN · 08-05-2016, 09:51 PM

Oil pump by itself??

0331Marine · 08-05-2016, 10:49 PM

I'd buy the cam and gaskets right now

spadz93 · 08-05-2016, 11:22 PM

Pm me offers

Sent from my Nexus 6P using Tapatalk

TwentyTen2SSRS · 08-07-2016, 05:15 PM

How much just for toe links?

Sent from my iPhone using Tapatalk

TwentyTen2SSRS · 08-07-2016, 05:16 PM

I'd it were stage 3 I'd take it. So if person wants cam alone I could take the rest

Sent from my iPhone using Tapatalk

1968firebirdls3 · 08-07-2016, 06:15 PM

I'd like the cam alone.

spadz93 · 08-08-2016, 06:33 AM

Quote:

Originally Posted by TwentyTen2SSRS

I'd it were stage 3 I'd take it. So if person wants cam alone I could take the rest

Sent from my iPhone using Tapatalk

Quote:

Originally Posted by 1968firebirdls3

I'd like the cam alone.

Messages incoming

Sent from my Nexus 6P using Tapatalk

spadz93 · 08-09-2016, 06:35 AM

Bump

spadz93 · 08-10-2016, 08:44 AM

Reasonable offers welcome, just remember these are all brand new, never used parts

TwentyTen2SSRS · 08-11-2016, 12:49 PM

PM me price for cam and supporting components. Just let me know lowest you'd let it go for

Sent from my iPhone using Tapatalk

spadz93 · 08-12-2016, 07:19 AM

OP updated. Cam sale pending.

Quote:

Originally Posted by TwentyTen2SSRS

PM me price for cam and supporting components. Just let me know lowest you'd let it go for

Sent from my iPhone using Tapatalk

Pm'ing you

spadz93 · 08-13-2016, 06:15 PM

Lots of bites, but not many follow throughs

Sent from my Nexus 6P using Tapatalk

08-05-2016, 12:57 PM	#1
spadz93 BUMBL Z Drives: 2015 ZL1 Join Date: Nov 2013 Location: Northern NJ Posts: 2,577 View My Garage	*FS: BTR Stage 4 Cam NEW, cam swap parts and others* Parts listed below, ALL PARTS NEW IN BOX pics on interest, all prices shipped, but make offers: SOLD: BMR BK024 Rear Subframe Urethane Mounts (Pro Version) SOLD MELLING HIGH VOLUME, HIGH PRESSURE OIL PUMP 10296 SOLD BTR LS3 Stg IV Cam 233/248 .619"/.595" 113+5 Cam SOLD CHEVROLET PERFORMANCE 3 BOLT 4 POLE CAM GEAR 58X 12586481 SOLD CHEVROLET PERFORMANCE LS2 LS3 LS7 TIMING CHAIN DAMPENER 12588670 SOLD KATECH C5-R TIMING CHAIN FOR GEN III/IV LSX HME-G68V-2 SOLD ARP CRANKSHAFT DAMPER BOLT FOR LS ENGINES 234-2503 SOLD ARP CAM BOLTS FOR 3 BOLT LS CAMS 134-1003 SOLD (1) BTR33904 Front Timing Cover Gasket SOLD (1) BTR85673 Timing Cover Damper Seal SOLD (2) BTR30223 Water Pump Gaskets SOLD COMP CAMS TRUNION UPGRADE Kit SOLD BMR TR002 Rear Toe Links w/ Polyurethane (Red Powdercoat) SOLD ATI SUPER DAMPER UDP 10% #918629 SOLD __________________ Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq Last edited by spadz93; 09-16-2016 at 10:19 PM.

08-05-2016, 09:51 PM	#3
XxScottxXN Huge Chevy Fan Drives: 14' 2SS/RS 1LE built 4/22/14 Join Date: Apr 2012 Location: Billings, MT Posts: 838	Oil pump by itself?? __________________ 2014 2SS/RS Red Rock Metallic, Recaro seats, sunroof, NPP, Nitto Motivo 275/40/20 front 315/35/20 back, Cold air inductions intake, elite catch can, Stainless Works 1 7/8" long tube headers w/hiflow cats, 20% tint, Intake rod mod by Gwatney Performance, Bo White ported & polished throttle body, powerbond 25% UDP, Howards Cam 226/236 duration- 525/525 lift 110 ....with a WHOLE bunch of fun added!!

08-05-2016, 11:22 PM	#5
spadz93 BUMBL Z Drives: 2015 ZL1 Join Date: Nov 2013 Location: Northern NJ Posts: 2,577 View My Garage	Pm me offers Sent from my Nexus 6P using Tapatalk __________________ Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq

08-07-2016, 05:15 PM	#6
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	How much just for toe links? Sent from my iPhone using Tapatalk __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

08-07-2016, 05:16 PM	#7
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	I'd it were stage 3 I'd take it. So if person wants cam alone I could take the rest Sent from my iPhone using Tapatalk __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

08-05-2016, 09:14 PM	#2
1968firebirdls3 Drives: 1968 firebird Join Date: Jul 2016 Location: Baton Rouge Posts: 48	Would you be willing to sell the cam alone?

08-05-2016, 10:49 PM	#4
0331Marine Drives: 2012 SS/RS MN6 Join Date: Mar 2016 Location: Covington Ga Posts: 783	I'd buy the cam and gaskets right now

08-07-2016, 06:15 PM	#8
1968firebirdls3 Drives: 1968 firebird Join Date: Jul 2016 Location: Baton Rouge Posts: 48	I'd like the cam alone.

08-09-2016, 06:35 AM	#10
spadz93 BUMBL Z Drives: 2015 ZL1 Join Date: Nov 2013 Location: Northern NJ Posts: 2,577 View My Garage	Bump __________________ Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq

08-10-2016, 08:44 AM	#11
spadz93 BUMBL Z Drives: 2015 ZL1 Join Date: Nov 2013 Location: Northern NJ Posts: 2,577 View My Garage	Reasonable offers welcome, just remember these are all brand new, never used parts __________________ Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq

08-11-2016, 12:49 PM	#12
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	PM me price for cam and supporting components. Just let me know lowest you'd let it go for Sent from my iPhone using Tapatalk __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

08-13-2016, 06:15 PM	#14
spadz93 BUMBL Z Drives: 2015 ZL1 Join Date: Nov 2013 Location: Northern NJ Posts: 2,577 View My Garage	Lots of bites, but not many follow throughs Sent from my Nexus 6P using Tapatalk __________________ Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq