08-25-2016, 06:37 AM | #1 |
Drives: 2010 1SS RS M6 Join Date: Jan 2015
Location: Appleton, Wisconsin
Posts: 521
|
SOLD
I have a new in the box set of Texas speed prc 260 heads with the hollow intake valves and springs and titanium hardware. Heads were milled slightly to bump compression a tick. .07 if I remember right. Also have new arp head bolts ,arp cam bolts, new gm 3 bolt timing gear, new cr5 roller timing chain, new balancer bolt, new Texas speed 7.4 pushrods, new timing gasket kit, new head gasket kit. And ls2 dog bone tensioner. I have about 3600 in this stuff, would like 2400 plus shipping, I'd bet shipping is 175-200, but will charge only actual shipping cost.
I'll get more pictures up later , must have deleted them from my iPad
__________________
Vararam intake, gmpp exhaust, borla stainless long tubes, cat less, jannetty tune, bmr lowering springs, heritage grill , smoked lenses
Last edited by Irace16; 09-16-2016 at 04:52 PM. |
08-25-2016, 12:35 PM | #2 |
Drives: 416 w/TH400 Join Date: Mar 2012
Location: Houston
Posts: 697
|
interested in just the heads, but need to know the cc of the chambers
__________________
ERL 416 - 12.5 cr, TH400, Custom VVT Cam, PRC 255 heads, NW 102 TB, Aeromotive stealth fuel system, Fast 102 plumbed with a nitrous express direct port kit, BMR 15" conversion kit
|
08-25-2016, 03:17 PM | #3 |
Drives: 2010 1SS RS M6 Join Date: Jan 2015
Location: Appleton, Wisconsin
Posts: 521
|
My email from Texas speed says they're 68cc
__________________
Vararam intake, gmpp exhaust, borla stainless long tubes, cat less, jannetty tune, bmr lowering springs, heritage grill , smoked lenses
|
08-26-2016, 06:45 PM | #4 |
Drives: 2010 Camaro SS Join Date: Jan 2015
Location: Valencia
Posts: 1,305
|
PM sent!
|
08-26-2016, 09:38 PM | #5 |
Drives: 2001 Camaro SS & 2005 Canyon ZQ8 Join Date: Apr 2014
Location: TX
Posts: 150
|
almost tempted to say id buy the rest if the guy buys just the heads...let me know...
|
08-27-2016, 01:59 AM | #6 |
Drives: 416 w/TH400 Join Date: Mar 2012
Location: Houston
Posts: 697
|
you said you milled the heads so it can't be 68cc chambers......not knowing the chamber size is going to be hard to sell.......who milled the heads, they should of told you the new chamber size
__________________
ERL 416 - 12.5 cr, TH400, Custom VVT Cam, PRC 255 heads, NW 102 TB, Aeromotive stealth fuel system, Fast 102 plumbed with a nitrous express direct port kit, BMR 15" conversion kit
|
08-27-2016, 06:21 PM | #7 |
Drives: 2010 1SS RS M6 Join Date: Jan 2015
Location: Appleton, Wisconsin
Posts: 521
|
My email from Texas speed said they were milled .007 and the chambers were 68 cc, Texas speed did the milling and assembly. They said .007 was barely anything and basically "cleaned them up".
__________________
Vararam intake, gmpp exhaust, borla stainless long tubes, cat less, jannetty tune, bmr lowering springs, heritage grill , smoked lenses
|
08-27-2016, 09:12 PM | #8 |
Drives: 2010 1SS RS M6 Join Date: Jan 2015
Location: Appleton, Wisconsin
Posts: 521
|
I'll call Monday and have them do the math
__________________
Vararam intake, gmpp exhaust, borla stainless long tubes, cat less, jannetty tune, bmr lowering springs, heritage grill , smoked lenses
|
08-28-2016, 10:58 AM | #9 |
Drives: 416 w/TH400 Join Date: Mar 2012
Location: Houston
Posts: 697
|
awesome thanks....so how much for just the heads? they are the 6bolt heads right
__________________
ERL 416 - 12.5 cr, TH400, Custom VVT Cam, PRC 255 heads, NW 102 TB, Aeromotive stealth fuel system, Fast 102 plumbed with a nitrous express direct port kit, BMR 15" conversion kit
|
08-28-2016, 07:28 PM | #10 |
Drives: 2010 1SS RS M6 Join Date: Jan 2015
Location: Appleton, Wisconsin
Posts: 521
|
Pm sent
__________________
Vararam intake, gmpp exhaust, borla stainless long tubes, cat less, jannetty tune, bmr lowering springs, heritage grill , smoked lenses
|
08-30-2016, 07:04 PM | #11 |
Drives: 2010 1SS RS M6 Join Date: Jan 2015
Location: Appleton, Wisconsin
Posts: 521
|
Someone here must need this stuff!
__________________
Vararam intake, gmpp exhaust, borla stainless long tubes, cat less, jannetty tune, bmr lowering springs, heritage grill , smoked lenses
|
08-31-2016, 09:55 AM | #12 |
Drives: 2010 1SS RS M6 Join Date: Jan 2015
Location: Appleton, Wisconsin
Posts: 521
|
They are 68cc after the .07 mill
__________________
Vararam intake, gmpp exhaust, borla stainless long tubes, cat less, jannetty tune, bmr lowering springs, heritage grill , smoked lenses
|
09-05-2016, 12:35 PM | #13 |
Drives: 1968 firebird Join Date: Jul 2016
Location: Baton Rouge
Posts: 48
|
Would you be interested in selling just the heads?
|
09-06-2016, 06:35 AM | #14 |
Drives: 2014 1LE Blue ray Join Date: Jul 2014
Location: San Diego
Posts: 228
|
pictures??
|
|
|
|
|