[bryguycbr]

Have your local news do a report on this. GM does not like bad news reported about safety issues. This is the best way to get GM to address the issue. It may take some time, but if this gets reported up high enough, say FOX news or CNN, GM may start looking more.

[TMasticTB91]

Originally Posted by SS 1LE

I can't believe nobody has made a template of the vent and made a nice cover for it that fits over it...would look much nicer than the towel tossed up there, and unless you need to use your defogger, it can just stay up there...

I've done the measurements and cut a template. I also took one of my microfiber towels and cut it to fit. Not sure if a softer, easier-to-store cloth cover or a harder, foam cover that maybe "locks" into the top of the defrost vents would be a better idea.

I also am doing this in my spare time and don't really have the materials to make these, but I'd love to work with ONE OF OUR SMART AND LOVELY VENDORS TO MANUFACTURE A FUNCTIONAL AND GOOD-LOOKING VENT COVER. Just sayin'.


Sent from my iPhone using Tapatalk

[cohete_camaro]

It's a pain in the butt... and the more times you run the wipers with no rain, you're going to tear one of those wiper blades up... Fog-X doesn't work, and putting a towel up doesn't look great... but it is, what it is.

[7rank]

Originally Posted by TMasticTB91

I've done the measurements and cut a template. I also took one of my microfiber towels and cut it to fit. Not sure if a softer, easier-to-store cloth cover or a harder, foam cover that maybe "locks" into the top of the defrost vents would be a better idea.

I also am doing this in my spare time and don't really have the materials to make these, but I'd love to work with ONE OF OUR SMART AND LOVELY VENDORS TO MANUFACTURE A FUNCTIONAL AND GOOD-LOOKING VENT COVER. Just sayin'.


Sent from my iPhone using Tapatalk

maybe hook up with these folks for something custom..
http://www.covercraft.com/us/en/dash-covers

[JLSuperfly]

Originally Posted by Capisce

Who is going to volunteer? Fog up your window and go get t-boned. Let the games commence!

I think it may need more than just one volunteer.

[The_Gretz]

I'm with everyone else who wants a nice looking vent cover. If it were black and nicely matched the dash, I'd probably pay more than is reasonable.

My cash is waiting for someone to make this!

[S!N!STER]

Originally Posted by SS 1LE

I can't believe nobody has made a template of the vent and made a nice cover for it that fits over it...would look much nicer than the towel tossed up there, and unless you need to use your defogger, it can just stay up there...

Gonna have my grandmother crochet one. She made one hell of a cover for the tissue box.

[Wheel Team 6]

Originally Posted by The_Gretz

I'm with everyone else who wants a nice looking vent cover. If it were black and nicely matched the dash, I'd probably pay more than is reasonable.

My cash is waiting for someone to make this!

I'm working on a cover with a tooling company that I'm connected to. The first prototype we made proved my theory correct. Once we get the prototype built the way I plan to then will fully test it to ensure it will solve this problem. Stay tuned.

[Kaizer_911]

Originally Posted by Wheel Team 6

I'm working on a cover with a tooling company that I'm connected to. The first prototype we made proved my theory correct. Once we get the prototype built the way I plan to then will fully test it to ensure it will solve this problem. Stay tuned.

Interested in this once completed.


Sent from my iPhone using Tapatalk

[blkbeauty16]

I'm also interested in it.

[TMasticTB91]

Originally Posted by Wheel Team 6

I'm working on a cover with a tooling company that I'm connected to. The first prototype we made proved my theory correct. Once we get the prototype built the way I plan to then will fully test it to ensure it will solve this problem. Stay tuned.

Wheel Team 6 - If you need additional cars to test I can drive out to NPR. Also been working on some of my own designs. Would love to help in any way I can.

[Wheel Team 6]

Originally Posted by TMasticTB91

Wheel Team 6 - If you need additional cars to test I can drive out to NPR. Also been working on some of my own designs. Would love to help in any way I can.

Worked on it Sunday and also went over findings today. Working on the next prototype this week. Granted for me it's slow progress as I have a full time daily that takes up a lot of my time. I will keep you in mind for another tester for sure. Maybe we can eventually brainstorm the ideas together. I have a proven theory as of today. Also have a few angles to create the solution for this. Working with a fine pitch tooling company friend as well as looking at other options. My goal is to find a surefire solution to this that can be offered to our camaro community.

[BriGuy]

If you go to the dealership they have determined a cause and a repair thank you GM for addressing this issue before some one got hurt

[Geo1193]

Has anyone gotten this fogging issue corrected?