11-16-2010, 10:44 PM | #799 |
|
I've taken many a dashes out. Depending on what your going after, sometimes you really don't know what short cut you can and cannot get away with until you just do it. Try what you think might be your best shot, if doesn't work, try your second option. all else fail do what service manual tells you. Many a times I have been able to take short cuts over what service information recommends. Really taking the whole dash out isn't that bad. all your doing is taken the skin off. it's not like your taken the whole dash with compoents. I bag the screws and mark location they came out. but most of the time all the screws are same anyway 7mm screws on gm products. Take your time and don't force anything, because there is usually hidden screw or rosebud needs disconnecting. Use trim tools so as not to mare any plastic trim. service information is great for this. it will tell you were all the clips are and screws. looks like ofer will be finding out soon. I wish I could start now. but I just bought my car and little time left to drive it before winter storage. it will be a fun project
|
11-16-2010, 11:14 PM | #800 |
Drives: 2016 2SS A8 HB/JB Join Date: Sep 2009
Location: Toronto, Ontario
Posts: 505
|
Does anyone have any instructions or pics of removing the dash? I'm quite close to wanting to do this but I want to make sure I can handle getting the dash in and out (since it's looking like that is needed).
__________________
Current: 2016 2SS Hyper Blue/Jet Black
Former: 2010 2LT/RS IOM/IO - Solo Catback w/ J-Pipes |
11-16-2010, 11:27 PM | #801 |
Drives: still saving! Join Date: Feb 2010
Location: Reading, PA
Posts: 6,227
|
Here is a pdf i just made of dash removal
|
11-17-2010, 01:16 AM | #802 |
Drives: CGM SS 6spd manual Join Date: Aug 2009
Location: Surrey bc canada
Posts: 152
|
AAAGGHHHHHHH..... is that snow on your Camaro? .. im freaking out cause we're supposed to get some this weekend...
|
11-17-2010, 07:01 AM | #803 |
Darth Martel
Drives: Black 1SS with 20% tinted windows Join Date: May 2009
Location: Bizzaroland
Posts: 1,496
|
I'll put together that powerpoint on dash removal. It's a bit more in depth than what patrickt posted.
|
11-17-2010, 07:50 AM | #804 |
"Camaro Joe"
|
funny thing is im going through a gm parts supplier i think im gonna cancle and go through patrick
|
11-17-2010, 09:22 AM | #805 |
Drives: '10 Camaro 2SS/RS CGM LS3 A6 Join Date: May 2009
Location: Bountiful, UT
Posts: 683
|
Oh, we're here, we're just poor. :(
I'm ready to do mine, except I have no money to buy parts If somebody wants to donate them, then I'll do a great DIY write-up!
__________________
- 2010 Camaro 2SS/RS CGM LS3 A6 "Lurch" - FLYNGSS -
Some ProCharger, Alky, CompCams, Brian Tooley, Holley, Livernois, K&N, Ridetech, DSS, Kooks, JDP Motorsports, Pfadt, BMR, Prothane, Weld, M&H, Mickey Thompson, RKSport, Elite, Garys, Defenderworx, Anvil, etc. |
11-17-2010, 03:26 PM | #806 |
Drives: 2010 cam.2ss/rs.iom,07'escalade esv Join Date: May 2009
Location: Pasc.Ms.
Posts: 841
|
GREAT WORK!! 2ss/rs...i am considering ordering parts list from ya as well,just waiting to see how well it works out and to find someone to do the mod,i certainly can't attempt myself,...again,great job
__________________
A9120159
1100:12/19/08 3800:06/19/09 6000:07/02/09 |
11-17-2010, 04:50 PM | #807 |
Drives: 2010 cam.2ss/rs.iom,07'escalade esv Join Date: May 2009
Location: Pasc.Ms.
Posts: 841
|
+1
__________________
A9120159
1100:12/19/08 3800:06/19/09 6000:07/02/09 |
11-17-2010, 04:54 PM | #808 | |
Drives: 2010 cam.2ss/rs.iom,07'escalade esv Join Date: May 2009
Location: Pasc.Ms.
Posts: 841
|
Quote:
__________________
A9120159
1100:12/19/08 3800:06/19/09 6000:07/02/09 |
|
11-17-2010, 09:14 PM | #809 |
Drives: CGM SS 6spd manual Join Date: Aug 2009
Location: Surrey bc canada
Posts: 152
|
|
11-17-2010, 09:16 PM | #810 |
Drives: 2011 2SS/RS (M6) 427 Twin Turbo Join Date: May 2008
Location: NJ
Posts: 1,090
|
__________________
2011 Camaro 2SS/RS ERL 427 M6 TT -AGP Twin Turbo 55/57 .83ar | ERL 427ci | Squash Fuel System | Stainless Works Chambered 3" | Mcleod RXT | Factory Hurst Short Throw | Black Forgestar F14s | CTS V 6 Piston Brembo | VIS AMS Carbon Fiber Hood | Anvil Carbon Fiber Spoiler |
11-17-2010, 09:35 PM | #811 |
"Camaro Joe"
|
i am a mechanic and custom builder i was hoping to have it in by now but since i was waiting for the hud but my dealer couldnt get it after 3 weeks of waiting i cancled my order and have it lined up with patrick who was awsome to talk to by the way. once i get my hud it will be installed right away this will be fully photo documented with the best write up i can do sorry it will take a bit longer till i get the hud
|
11-17-2010, 09:52 PM | #812 | |
Drives: Currently 2016-2SS, Future ZL1/Z28 Join Date: Jul 2010
Location: Kansas
Posts: 978
|
Quote:
__________________
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs! | RPI Designs | Cosmetics and Lighting Modification Discussions | 36 | 04-02-2020 05:32 PM |
February 2010 Camaro production & sales figures. Tops Mustang for 9th straight month! | Tran | 5th Gen Camaro SS LS LT General Discussions | 52 | 03-03-2010 09:39 PM |
DEALER ONTARIO CANADA WE SHIP ANYWHERE IN CANADA 2010 CAMAROS FOR SALE IN STOCK NOW! | dz | Dealer Camaros for Sale | 0 | 03-03-2010 05:43 PM |
Zex Nitrous System for 2010 Camaro SS @ BMC Performance! | Kris@BMCPerformance | Forced Induction | 2 | 02-18-2010 06:59 PM |
2010 Chevrolet Camaro makes finalist list for 2010 World Car Design of the Year | Tran | 5th Gen Camaro SS LS LT General Discussions | 37 | 02-17-2010 04:22 PM |