WHO'S GOT THE BEST CAMARO HOOD???

[AKA-22]

Originally Posted by stieger

Seibon BBII hood. But again, there is no "best hood." It's a completely objective question. People are going to say their hood is the best because they bought it.

i just dont want a hood that doesn't gives me a so called fiberglass problem.....i want a hood thats going to be plug and play and leave it alone type of hood ....

[AKA-22]

Originally Posted by Wizzer

Looks good. I have been looking for a hood for about a year. I seen a lot of guys post up pictures of their cars but if you look close something is not aligned on the hood. Either the passenger side front is popped up or there is a big gap in the exact middle of the hood under the hood latch.

I wanted to ask them many times why the gap but I don't want to call them out and make them feel bad. I assume when you say the MPD1 hood fits perfect every time that you don't get many complaints on fitting?

I am very interested.

Thanks

yea thats fiberglass and i really dont want those problems...i have a SS impala with fiberglass hood and i do have fitment issue like you have seen...i like the hood so much i just put up with it so to speak.....I like the hoods from MPD1....would like to see Z-force Hood hood with two vents on each side like the RK sports hood.. They have two hoods under construction cant wait to see those....

[AKA-22]

Originally Posted by Eric-MPD1.com

Why?
1, Fits perfect everytime
2, Designed in conjunction with CAI inc for a dedicated ram air system inc water management system.
3, Incredible level of detail in design and construction
4, Priced almost 40% less than supposedly "better" hoods. Why? Because my installers tell me all the time that a MPD1 hood is the best "ASK THE C5 MEMBER WHO OWNS ONE!"

would like to see Z-force Hood hood with two vents on each side like the RK sports hood.. you have two hoods under construction cant wait to see those....
__________________

[Big C CamaroSS]

I think the Nickey Stinger 2 hood (the one with no point) is thee ABSOLUTELY BEST LOOKING hood there is for the 5th Gen!!! It has the hood scoop, but its not to much.....just enough! I found one on sale for $1050 but shipping is $500 . My "big money" mod is going to be a new hood. I like the look of a hood scoop (plus bringing in cooler outside is good), but I don't like BIG over-the-top scoops. Just my opinion .

[Wizzer]

Originally Posted by AKA-22

yea thats fiberglass and i really dont want those problems...i have a SS impala with fiberglass hood and i do have fitment issue like you have seen...i like the hood so much i just put up with it so to speak.....I like the hoods from MPD1....would like to see Z-force Hood hood with two vents on each side like the RK sports hood.. They have two hoods under construction cant wait to see those....

Are there hoods steel?

Looks like from the pics they take a stock hood and tweak it.

Am I correct in my thinking?

[Mr_Draco]

Personally I prefer the RK Sport Ram Air hood.

http://www.rksport.com/main/part_det...mdid=1&catid=4

[Eric-MPD1.com]

Originally Posted by AKA-22

would like to see Z-force Hood hood with two vents on each side like the RK sports hood.. you have two hoods under construction cant wait to see those....
__________________

I can understand why you would like to see that. The intake on that hood looks weak to me. We built our heat extracter into the back of the hood however so they can pass a lot more hot air out plus have excellent water control.

Originally Posted by Wizzer

Are there hoods steel?

Looks like from the pics they take a stock hood and tweak it.

Am I correct in my thinking?

NO.

While we modeled off of a OE hood, the MPD1 hoods are all new fiberglass top and bottom. Our latch, hinge and strut bracket plates, and the mesh in the openings are all epoxy primed steel.

[C O Jones]

Originally Posted by Eric-MPD1.com

Why?
1, Fits perfect everytime
2, Designed in conjunction with CAI inc for a dedicated ram air system inc water management system.
3, Incredible level of detail in design and construction
4, Priced almost 40% less than supposedly "better" hoods. Why? Because my installers tell me all the time that a MPD1 hood is the best "ASK THE C5 MEMBER WHO OWNS ONE!"

Love the hood Eric, future mod.....

[Fiftydriver]

I researched hoods for over a year and decided the MPD-1 Z-force was exactly what I wanted, especially after hearing about all the positive reviews from owners and installers.

Have had one on order for a while and getting VERY excited to get it here, installed and painted!!! Will post pics ASAP after its installed.

Also got the prepainted rear spoiler from Eric, its already here and installed, amazing quality and paint match dead on to my RJT finish.

[Atti2de]

took us about 20 min to install a Seibon hood, fits well IMO.

[DuhKoDuh]

Either Zl1 or MPD1

[UF4LIFE102SS]

Erics hood looks good but I hate the 2 openings. Just cover the 1 on the frontend. IMHO









I love my ACS hood! But u need other things

[chevy 3]

Vis termanater carbonfiber hood. Don't know if it's the best but a nice fit and looks great.

[Ir0nM4n]

Not a fan of the double scoop. If it were me I would fill in the mailslot and have one scoop.