Valve Covers with relocated coil packs - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

straka · 10-21-2015, 10:40 AM

Does anyone make a direct bolt on setup for the 5th gen ?

Unreal · 10-21-2015, 10:54 AM

I believe Katech does.

avido · 10-21-2015, 01:55 PM

jegs sells a proform kit with valvecover coil relocation and spark plug cables

here the result.....

Bodywerks · 10-21-2015, 07:25 PM

I went proform and relocator kit also. Nice way to go. And WAY more affordable than katech.

KingofBattle · 10-21-2015, 08:42 PM

CBM makes a coil relocation kit that works great but you have to pick your own valve covers.

White_SS/RS · 10-22-2015, 10:25 AM

Holley makes some that look good. coils are in the same place but it cleans up the extra hardware involved with the stock covers. My question is who also offers covers that works with the 1LE oil separator?

Warpaint69 · 10-22-2015, 10:26 AM

Killer looking engine bay KingofBattle

1989GTA · 10-22-2015, 12:35 PM

I also went with the Holley valve covers. The coils are bolted directly to the valve covers and lowers them somewhat.

CFD · 10-22-2015, 12:47 PM

Here are the mounts and covers I offer, I am now also doing the valve covers, remove extra mounting tabs and powdercoating fo a nice clean look. The second page has a couple of photos of them installed.

http://www.camaro5.com/forums/showthread.php?t=173924

Sales@Phastek · 10-22-2015, 01:32 PM

Quote:

Originally Posted by straka

Does anyone make a direct bolt on setup for the 5th gen ?

straka,

HERE are some Holley valve covers that might get what you are looking for.

Thank you,
Ricardo

Taco Time · 10-22-2015, 01:55 PM

Quote:

Originally Posted by KingofBattle

CBM makes a coil relocation kit that works great but you have to pick your own valve covers.

I love your valve covers! Everything looks clean. Those fuel rails stick out like a sore thumb to me though. I have the Holley valve covers that Ricardo (Phastek) linked with Holley fuel rails.

Sales@Phastek · 10-22-2015, 02:06 PM

Quote:

Originally Posted by KingofBattle

CBM makes a coil relocation kit that works great but you have to pick your own valve covers.

This engine bay is sweet!! Great pics!!

Quote:

Originally Posted by Taco Time

I love your valve covers! Everything looks clean. Those fuel rails stick out like a sore thumb to me though. I have the Holley valve covers that Ricardo (Phastek) linked with Holley fuel rails.

How was the install of the covers? They look good paint matched under there.

Thank you,
Ricardo

Taco Time · 10-22-2015, 03:26 PM

Quote:

Originally Posted by Sales@Phastek

How was the install of the covers? They look good paint matched under there.

Thank you,
Ricardo

I didn't install them, J Rod did. While my car sat motorless while I waited on my 417 I picked them up and had them powder coated. Once the 417 came in I just dropped them off at J Rod's shop to be added to the motor. I'm very pleased with them.

KingofBattle · 10-22-2015, 06:29 PM

Thanks, it was the most difficult mod I have done but it was worth it!

Quote:

Originally Posted by Warpaint69

Killer looking engine bay KingofBattle

10-21-2015, 10:40 AM	#1
straka Drives: 2015 SS Join Date: Mar 2015 Location: Shreveport Posts: 71	Valve Covers with relocated coil packs Does anyone make a direct bolt on setup for the 5th gen ? __________________ 2015 L99: TSP Headers & Xpipe tuned by Rhino79

10-21-2015, 10:54 AM	#2
Unreal Drives: 2006 Z06 Join Date: Oct 2010 Location: Gilbert, AZ Posts: 5,712	I believe Katech does. __________________ Nick Corvette Z06 -1200ish rwhp

10-21-2015, 01:55 PM	#3
avido Drives: camaro ss\rs Join Date: Jun 2014 Location: Italia Posts: 755	jegs sells a proform kit with valvecover coil relocation and spark plug cables here the result..... __________________ 2014 camaro SS Whipple powered ,3.750 pulley,ID850, CAI,Flowmaster American Thunder exhaust,MGW racing shifter,Bo White ported tb,MightyMouse Catch Can,Vitesse throttle controller,GM 3.91 rear end, Dynatech longtube haders, BTR Pd cam,Fluidampr stock pulley,ZL1 fuel pump and ADM fpcm, Phastek scoop and fluid thank relocation Bmr Motor mount . Tuned by Mastuning

10-21-2015, 07:25 PM	#4
Bodywerks Drives: 2015 2SS/RS/1LE Join Date: Feb 2015 Location: Tucson Posts: 866	I went proform and relocator kit also. Nice way to go. And WAY more affordable than katech. __________________ 2015 SS/RS/1LE HSA delete, VMAX throttle body, CAI inc. Intake, PRC255 heads, BTR 660 springs, BTR cryo-treated rockers, PAT G 232/240 .654/.626 110+2, johnson 2110's, Manton 502 pushrods, C5R, Melling high volume/high pressure, Powerbond 25% underdrive pulley, Proform covers, Kooks stepped headers, catless mids, Doug Thorley exhaust. 512rwhp, 446rwtq on a mustang dyno, tuned by Cunningham motorsports.

10-21-2015, 08:42 PM	#5
KingofBattle Drives: 2011 Camaro 2SS Join Date: Apr 2012 Location: IL/ near STL United States Posts: 191 View My Garage	Mine CBM makes a coil relocation kit that works great but you have to pick your own valve covers. Attached Images __________________

10-22-2015, 10:25 AM	#6
White_SS/RS Drives: 14 1LE Join Date: Mar 2013 Location: Spokane, WA Posts: 1,567	Holley makes some that look good. coils are in the same place but it cleans up the extra hardware involved with the stock covers. My question is who also offers covers that works with the 1LE oil separator? __________________ LMS Engineering

10-22-2015, 10:26 AM	#7
Warpaint69 Drives: 2013 VR 2SS RS Join Date: Sep 2012 Location: Kansas Posts: 619	Killer looking engine bay KingofBattle __________________

10-22-2015, 12:35 PM	#8
1989GTA Drives: 1989 GTA Trans Am Join Date: Jun 2012 Location: Cypress, California Posts: 610	I also went with the Holley valve covers. The coils are bolted directly to the valve covers and lowers them somewhat.

10-22-2015, 12:47 PM	#9
CFD Drives: 2SS/RS L99 BLACK Join Date: Apr 2010 Location: Franklin , MA Posts: 6,696	Here are the mounts and covers I offer, I am now also doing the valve covers, remove extra mounting tabs and powdercoating fo a nice clean look. The second page has a couple of photos of them installed. http://www.camaro5.com/forums/showthread.php?t=173924