10-01-2012, 12:53 PM | #1 |
Drives: 2012 Black 2SS/RS M6 Join Date: Mar 2012
Location: Stamford, Connecticut
Posts: 672
|
Scratches on my ZL1 Bumper
I woke up in the morning to my car with all white across the bumper. I don't know what happened.... It came off, but what was behind it was not good. It had little scratches, I tried to get it out with rubbing compound but i think i rubbed TOO hard and think i made it worse. Can a body shop fix this without spraying the whole thing over again? Or is there anything I can do myself to get rid of the marks or make it less noticeable? I put some touch up paint on the chips but doesn't look to great.... Thanks
__________________
Pfadt Race Engineering 1.25" Lowering Springs| Pfadt Spec Performance Street Alignment|ZL1 Front Bumper Conversion|ZL1 20x9 Rims|Pirelli P Zero All Season Plus 275/40R20Y Square Setup||Footwell Lighting|G2 Gold Painted Brake Calipers
Stainless Power Long Tube Headers|Cold Air Inductions Cold Air Intake|VMAX CNC Spiral Ported Throttle Body|Stainless Works Retro Chambered Catback| Vitesse Throttle Controller --Jannetty Racing Enterprises Dyno Tuned|408 RWHP |
10-01-2012, 12:56 PM | #2 |
|
Is that missing paint? If so, no, it need to be painted. The scratches can be buffed out.
Next time post here FIRST. Clay instead of compound probably would've saved you what's going to be a $500 repair.
__________________
[B]
|
10-01-2012, 01:08 PM | #3 |
#TeamBeckyD
Drives: 2017 HBM 2SS Convertible A8 Join Date: Aug 2008
Location: Apopka, FL
Posts: 10,496
|
The ones on the face of the bumper should come out they will need to be wet sanded it looks like paint missing on the edges if so re-paint figure $250-$350
__________________
#TeamBeckyD
**FIFTY HBM 2SS VERT** |
10-01-2012, 01:17 PM | #4 |
Drives: 2012 Black 2SS/RS M6 Join Date: Mar 2012
Location: Stamford, Connecticut
Posts: 672
|
not worried about the chips in the paint as they are not AS noticeable as the scratch marks on the face of the bumper. Should I do anything to get those out or should I bring it to someone?
__________________
Pfadt Race Engineering 1.25" Lowering Springs| Pfadt Spec Performance Street Alignment|ZL1 Front Bumper Conversion|ZL1 20x9 Rims|Pirelli P Zero All Season Plus 275/40R20Y Square Setup||Footwell Lighting|G2 Gold Painted Brake Calipers
Stainless Power Long Tube Headers|Cold Air Inductions Cold Air Intake|VMAX CNC Spiral Ported Throttle Body|Stainless Works Retro Chambered Catback| Vitesse Throttle Controller --Jannetty Racing Enterprises Dyno Tuned|408 RWHP |
10-01-2012, 02:12 PM | #5 |
You can buff it out but I would try using McGuire's swirl remover if the scratches are not too deep
__________________
2010 L99 Black on Black W/Ground effects
Mods: Kenne Bell, LS3 Conversion, LS9 cam, BMR Stage 2 |
|
10-01-2012, 03:36 PM | #6 |
Drives: 2012 ZL1 #450 Join Date: Nov 2011
Location: Big Spring, TX
Posts: 479
|
It's missing paint on the edge line. You can buff the scratches out, but you will not be able to fix the marred paint.
|
10-01-2012, 03:53 PM | #7 |
#TeamBeckyD
Drives: 2017 HBM 2SS Convertible A8 Join Date: Aug 2008
Location: Apopka, FL
Posts: 10,496
|
the only way to get the scratches is with a buffer if you have one some Adams you can knock that out.
__________________
#TeamBeckyD
**FIFTY HBM 2SS VERT** |
10-01-2012, 04:02 PM | #8 |
Drives: 1968 Coupe, 2010 2SS, 2011 2SS/RS Join Date: Oct 2011
Location: WIsconsin
Posts: 1,252
|
If you have machine (PC or Flex) you might be able to get most of that out. If you don't have one or are uncomfortable using one, you might be spending some time at a local bodyshop having them do it.
__________________
|
10-01-2012, 04:13 PM | #9 |
it's mind bottling..
Drives: SGM Join Date: Apr 2011
Location: miami floirda.
Posts: 5,393
|
A compound ? Dude...
__________________
|
10-01-2012, 06:29 PM | #10 |
Drives: 2012 2LT/RS, 2005 SLK55 AMG Join Date: Jul 2012
Location: Falls Church, VA
Posts: 1,163
|
This thread makes me think of this other thread:
micro scratches in clear coat www.camaro5.com/forums/showthread.php?t=251673 I always try to use a clay bar first. Most body shops will probably say that the whole thing needs to be repainted. |
10-01-2012, 07:30 PM | #11 |
BRUCE WAYNES DD
Drives: 2010 2SS/RS CGM Join Date: Dec 2011
Location: wilmington NC
Posts: 511
|
looks like some one backed into u...
|
10-01-2012, 07:53 PM | #12 | |
Account Suspended
Drives: 2012 Camaro 1SS/RS Join Date: Jun 2012
Location: Naples, Florida
Posts: 481
|
Quote:
|
|
|
|
|
|