Heater Hoses (V8) - Page 11 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PAUL SS · 11-23-2011, 01:02 PM

Done. Well worth the time and expense, neither of were very much.

JDP Motorsports · 11-23-2011, 03:15 PM

Quote:

Originally Posted by PAUL SS

Done. Well worth the time and expense, neither of were very much.

Looks awesome!!!

PAUL SS · 11-23-2011, 06:10 PM

Thanks, I love the flipped fuel rails and no cover on the manifold.

BowlingSS · 11-24-2011, 03:08 PM

GM has back ordered the hoses.

Bill

JDP Motorsports · 11-24-2011, 03:14 PM

We have 2 sets in stock. I have more coming...

Kind regards,

Jordan Priestley
888.308.6007

RED DEMON SS · 11-24-2011, 09:15 PM

Quote:

Originally Posted by JDP Motorsports

We have 2 sets in stock. I have more coming...

Kind regards,

Jordan Priestley
888.308.6007

Would i need these when my MagnaCharger get's installed?

JDP Tech · 11-25-2011, 10:51 AM

The 2010-11 factory hoses do not work with the Maggie (obviously), but the kit does come with new hose for the heater hoses. They are just hoses though, and nothing particularly special.
We haven't tried the 2012+ hoses on a Maggie equipped car, but from the looks of it, they should fit. My only worry would be the location of the intercooler reservoir, whether they interfere with the 2012 hoses or not. Looks like they should be ok, but I can't guarantee it...

JDP Tech · 11-28-2011, 11:51 AM

I just looked at one of our Maggie cars running around, and it looks like the 2012 heater hoses should work perfectly with the Maggie. The reservoir doesn't go all the way to where the hoses sit.

The Maggie kit does come with hoses, so the 2012 hoses aren't required, but would look better IMO.

nebchevy · 02-25-2013, 11:59 AM

Quote:

Originally Posted by JDP Motorsports

We have a few sets of the GM 2012 Hoses coming! They will be $80 shipped. I'll post up some pictures when I get them installed on my Camaro.

Kind regards,

Jordan Priestley
888.308.6007

When will you have them ready to ship and instructions on how to install??

JDP Sales · 02-25-2013, 12:47 PM

Quote:

Originally Posted by nebchevy

When will you have them ready to ship and instructions on how to install??

We have them in stock and ready to go! We did a DIY write up HERE on this set up.

Feel free to call, PM or email us with any questions.

Best regards,

Tyler
888-308-6007

JDP Tech · 02-25-2013, 01:57 PM

PM Sent

Feel free to call, email, or PM us anytime!
- Jeremy

Cincy10SSRS · 03-06-2013, 10:58 AM

I noticed this note when looking at the GM part number on GMPartsDirect's site. Says 19259242 has been replaced with a new number? Then when I did a "test" checkout it says part # 22962570 was added to my cart. Anyone know about this? I don't want to order and end up with the wrong hose set.

YOUR SHOPPING CART:ITEM #22962570 has just been added to your shopping cart.

22962570: HOSE
(1 in cart)

19259242 - HOSE

GM PART # 19259242 *
CATEGORY: All
PACK QTY: 1
CORE CHARGE: $0.00

List Price:$70.15Price:$40.79You Save:$29.36 (42%) DESCRIPTION: HOSE

Page 1:</SPAN> 1-1 of 1 items
* This part has been replaced by a new part number. The new part number will be used if you add this part to your cart.

Cincy10SSRS · 03-08-2013, 07:14 AM

Really? Nobody knows about this part number change for the heater hose set?

I don't want to end up ordering and getting the wrong ones to do this relocate DYI on my 2010 SS.

blazzin1 · 03-08-2013, 08:08 AM

Yes, the part number changed. Order by either part number....doesn't matter....you'll get the same thing. Just got mine yesterday from JDP....awesome service, fast shipping!!!

11-23-2011, 01:02 PM	#141
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,690 View My Garage	Done. Well worth the time and expense, neither of were very much. __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein

11-23-2011, 06:10 PM	#143
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,690 View My Garage	Thanks, I love the flipped fuel rails and no cover on the manifold. __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein

11-24-2011, 03:08 PM	#144
BowlingSS Camaro Owner Since 1987 Drives: 2011 2SS/RS L99 RJT Join Date: Jun 2006 Location: Lawrenceville, GA Posts: 2,185	GM has back ordered the hoses. Bill __________________ 2011 Camaro 2SS/RS L99 RJT CAI, Inc. Cold Air Induction;ADM Scoop Rx Catch Can;Rx Breather;Roto-Fab Washer Container VMax Ported RJT Throttle Body XSPower Headers and XSPower 3" Exhaust System Elite Engineering Tunnel Brace, Gorilla Wheel Lock System; Bear Rotors, Hawk HPS Tinted Windows 35%;EFILive Tune

03-06-2013, 10:58 AM	#152
Cincy10SSRS Drives: 2010 2SS RS M6 Join Date: Mar 2011 Location: Cincinnati area Posts: 1,522	I noticed this note when looking at the GM part number on GMPartsDirect's site. Says 19259242 has been replaced with a new number? Then when I did a "test" checkout it says part # 22962570 was added to my cart. Anyone know about this? I don't want to order and end up with the wrong hose set. YOUR SHOPPING CART:ITEM #22962570 has just been added to your shopping cart.22962570: HOSE (1 in cart) 19259242 - HOSE GM PART # 19259242 * CATEGORY: All PACK QTY: 1 CORE CHARGE: $0.00 List Price:$70.15Price:$40.79You Save:$29.36 (42%) DESCRIPTION: HOSE Page 1:</SPAN> 1-1 of 1 items * This part has been replaced by a new part number. The new part number will be used if you add this part to your cart. __________________ Traded-in car: K&N Typhoon intake, JBA Shorty headers, Solo mid-pipes/hi-flow cats, GMPP Track Pack axle-back, Vmax ported TB, Billet Custom catch can, billet tensioner pulley, Hines Hex Vents, Z/TA rear spoiler, ProCustom headlight covers, Drake black/riveted quarter window covers, GM satin fuel door, chrome and brushed caps/covers under the hood, EmblemPros underhood bowtie & fuel rail "Camaro" plates, chrome "SS" door kick-panels, chrome trunk latch plate & strut rods, Street Scene lower grille ducts w/LED lights, front bowtie-delete, Yates Performance pedals, 35% tint, etc. Last edited by Cincy10SSRS; 03-06-2013 at 11:26 AM.

03-08-2013, 07:14 AM	#153
Cincy10SSRS Drives: 2010 2SS RS M6 Join Date: Mar 2011 Location: Cincinnati area Posts: 1,522	Really? Nobody knows about this part number change for the heater hose set? I don't want to end up ordering and getting the wrong ones to do this relocate DYI on my 2010 SS. __________________ Traded-in car: K&N Typhoon intake, JBA Shorty headers, Solo mid-pipes/hi-flow cats, GMPP Track Pack axle-back, Vmax ported TB, Billet Custom catch can, billet tensioner pulley, Hines Hex Vents, Z/TA rear spoiler, ProCustom headlight covers, Drake black/riveted quarter window covers, GM satin fuel door, chrome and brushed caps/covers under the hood, EmblemPros underhood bowtie & fuel rail "Camaro" plates, chrome "SS" door kick-panels, chrome trunk latch plate & strut rods, Street Scene lower grille ducts w/LED lights, front bowtie-delete, Yates Performance pedals, 35% tint, etc.

11-24-2011, 03:14 PM	#145
JDP Motorsports Drives: 2011 Camaro SS/ 2016 Camaro SS Join Date: Jun 2009 Location: Sandy, Utah Posts: 3,256	We have 2 sets in stock. I have more coming... Kind regards, Jordan Priestley 888.308.6007

11-25-2011, 10:51 AM	#147
JDP Tech Drives: 2010 CGM Camaro 2SS/RS 429 LSX/F1X Join Date: Aug 2011 Location: Sandy, UT Posts: 429	The 2010-11 factory hoses do not work with the Maggie (obviously), but the kit does come with new hose for the heater hoses. They are just hoses though, and nothing particularly special. We haven't tried the 2012+ hoses on a Maggie equipped car, but from the looks of it, they should fit. My only worry would be the location of the intercooler reservoir, whether they interfere with the 2012 hoses or not. Looks like they should be ok, but I can't guarantee it...

11-28-2011, 11:51 AM	#148
JDP Tech Drives: 2010 CGM Camaro 2SS/RS 429 LSX/F1X Join Date: Aug 2011 Location: Sandy, UT Posts: 429	I just looked at one of our Maggie cars running around, and it looks like the 2012 heater hoses should work perfectly with the Maggie. The reservoir doesn't go all the way to where the hoses sit. The Maggie kit does come with hoses, so the 2012 hoses aren't required, but would look better IMO.

02-25-2013, 01:57 PM	#151
JDP Tech Drives: 2010 CGM Camaro 2SS/RS 429 LSX/F1X Join Date: Aug 2011 Location: Sandy, UT Posts: 429	PM Sent Feel free to call, email, or PM us anytime! - Jeremy

03-08-2013, 08:08 AM	#154
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	Yes, the part number changed. Order by either part number....doesn't matter....you'll get the same thing. Just got mine yesterday from JDP....awesome service, fast shipping!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
auto trans difference from v6 to v8?	bmwdon	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	8	12-15-2010 05:45 PM
Experienced comparison V6 vs. V8	Blue Menace	5th Gen Camaro SS LS LT General Discussions	236	08-20-2010 11:01 AM
Jay leno hints to the z28 in video!!!	tru imperial blu	Camaro ZL1 Forum - ZL1 Specific Topics	103	11-27-2009 09:56 AM
Perceptions Die... OK Say Again Y Foreign is Better	Cmicasa the Great XvX	General Automotive + Other Cars Discussion	428	11-09-2009 04:04 PM
Block Heater Options?	blazzin1	5th Gen Camaro SS LS LT General Discussions	16	01-16-2009 05:30 PM