Aftermarket Backup Camera wiring

[chefmichael]

Good afternoon all,

So I recently received a pioneer mvh-2300 and a new back up camera for the holidays. Got the radio hooked up and running no problem. Now I've run into a road block in trying to wire the camera. I know I need to wire into the reverse lamp wiring and a ground in the rear (front wiring into the head unit isn't an issue) but the reverse lamp wiring is... a bit difficult to get to. Reading from other posts, the easiest thing to do is tap into the rear lamp wiring.

There was another thread on here that was great but the photos were no longer available so I took a photo of the driver side rear light connection and am wanting to know which of these wires is the +12v to the reverse lamps. The post mentioned a "teal" wire. Is that the +12v wire to the reverse lamp that the arrow is pointing. The passenger side doesn't have that color wire. I'm pretty sure it is but just needing a second set of eyes to confirm. The black ground wire is easy so no worries there.

Thanks for all the help.

[darkrider01]

That is the correct teal wire, just above the lavender/purple one.