plastidip anthracite mettalic on base wheels

Glen e · 09-13-2014, 09:41 AM

taking a long trip so I want my base wheels/run flats instead of my street cray wheels/non RF tires, but wanted something diff - 4 coats of anthracite metallic and their glossifier - very happy with results:

purpleRac3r · 09-14-2014, 11:31 AM

That looks striking, Glen! A good match for Cyber Gray. Out of curiosity, how long did it take you to do all 4 wheels?

Glen e · 09-14-2014, 07:25 PM

about 4 hours - taping off, cleaning wheels with acetone and tar remover, 4 coats on each wheel, 10 min apart, then a single coat of their gloss product..then opti coat on the barrels...

total cost = $50 - 3 cans of anthracite and 1 can of their "glossifer"

DIY: wheel painting vids at dipyourcar.com

asptroopa1 · 09-15-2014, 09:46 AM

That looks great........I've always just smeared Vaseline on the tire and then cleaned it off to keep the paint off.....those look great!

09-13-2014, 09:41 AM	#1
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	plastidip anthracite mettalic on base wheels taking a long trip so I want my base wheels/run flats instead of my street cray wheels/non RF tires, but wanted something diff - 4 coats of anthracite metallic and their glossifier - very happy with results: __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant Last edited by Glen e; 09-13-2014 at 08:28 PM.

09-14-2014, 11:31 AM	#2
purpleRac3r Drives: 1974 & 2014 Corvette Stingrays Join Date: Mar 2013 Location: Troy, Mo Posts: 623	That looks striking, Glen! A good match for Cyber Gray. Out of curiosity, how long did it take you to do all 4 wheels? __________________ '74 Stingray coupe, heavily modified, as seen in August 2011 VETTE magazine, 2014 Stingray Z51 #196, ordered 02/11/13, built 08/29/13, Museum Delivery 10/04/13, driven daily!

09-14-2014, 07:25 PM	#3
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	about 4 hours - taping off, cleaning wheels with acetone and tar remover, 4 coats on each wheel, 10 min apart, then a single coat of their gloss product..then opti coat on the barrels... total cost = $50 - 3 cans of anthracite and 1 can of their "glossifer" DIY: wheel painting vids at dipyourcar.com __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant

09-15-2014, 09:46 AM	#4
asptroopa1 asptroopa1 Drives: 2014 Corvette Join Date: May 2013 Location: Little Rock Arkansas Posts: 373	That looks great........I've always just smeared Vaseline on the tire and then cleaned it off to keep the paint off.....those look great!