Hanging the Master Blaster - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Maxspeed · 03-10-2012, 02:20 PM

Here is how I hung my MB on my garage wall. I bought a Crown Bolt 50 lb. Flip-Up Storage Hanger for $5.95 and 2 - 1/4" x 2.5" lagbolts and washers from HomeDepot.

http://www.homedepot.com/h_d1/N-5yc1...keyword=foldup storage hook&storeId=10051

Sterling · 03-10-2012, 02:24 PM

Looks like it was made for it...

Maxspeed · 03-10-2012, 02:37 PM

I rolled the dice and hoped it would fit. Off the top of my head it hangs out about 12" leaving room to wrap the cord and hose around.

Buffnshine · 03-10-2012, 03:29 PM

Great idea

Adam's Polishes · 03-12-2012, 10:50 AM

PERFECT! I actually have seen that exact hanger in the garage organization section of lowes... I'll have to grab one.

Maxspeed · 03-12-2012, 06:42 PM

Works perfect. Dont forget to buy some lag bolts. I wouldn't trust the screws that came with it since it hangs over my Camaro.

Moose · 03-13-2012, 09:04 AM

I just saw a commercial for this product.

Have you used it and if so, what did you think? Was it expensive???

Thanks
Ed

Maxspeed · 03-13-2012, 12:53 PM

I used it for the first time yesterday. It blew the CB for my 15 amp service in my garager but ran an extsenion cord from the 20 amp service in the kitchen and had no problems. It worked great. Got all the water out of every crevice and dried the grill nicely. Next time I will open the doors and blow off the jambs. Be careful around the channels on the roof as it lifted one slightly, but it popped back in place. It cost $308 and according to Adams will increase to $338 in April. Was expensive but a great way to dry the car.

03-10-2012, 02:20 PM	#1
Maxspeed ~COTW 6/30/14~ Drives: 2011 Camaro SS/RS Join Date: Oct 2011 Location: Mansfield Mass Posts: 2,906 View My Garage	Hanging the Master Blaster Here is how I hung my MB on my garage wall. I bought a Crown Bolt 50 lb. Flip-Up Storage Hanger for $5.95 and 2 - 1/4" x 2.5" lagbolts and washers from HomeDepot. http://www.homedepot.com/h_d1/N-5yc1...keyword=foldup storage hook&storeId=10051 Last edited by Maxspeed; 04-26-2012 at 03:22 PM.

03-10-2012, 02:24 PM	#2
Sterling Drives: 2010 Camaro 1LT/RS M6 Join Date: Nov 2007 Location: Fairhaven, MA Posts: 5,885 View My Garage	Looks like it was made for it... __________________ Trifecta tune, Vararam Intake, VMAX throttle body and manifold insulator, RxPerformance Catch Can, , MRT v1.0 and Louvers, Barton shifter, BMR strut tower brace, RED dome light and Plasma LED DRL's, fieldgoal00's Halo 1 harness, hood spears/side stripes, rain guards, custom bowtie, Team LLT badges, headlight and foglight covers, taillight and side marker covers, backup light covers, WeatherTech floormats

03-10-2012, 02:37 PM	#3
Maxspeed ~COTW 6/30/14~ Drives: 2011 Camaro SS/RS Join Date: Oct 2011 Location: Mansfield Mass Posts: 2,906 View My Garage	I rolled the dice and hoped it would fit. Off the top of my head it hangs out about 12" leaving room to wrap the cord and hose around. __________________ Mods: Heritage Grill, Blade Spoiler, Corrado Hoodliner Mural, Premium Engine Boxes, Radiator Shroud, Custom Painted Bowties, Dipstick & Engine Caps, RX Catch Can, Corsa cat back exhaust, CAI black powder coat cold air, Apex cold air intake scoop and Apex washer tank relocate kit, Dynatech SuperMAXX Ceramic Coated LT Headers, High Flow Cats, JRE470 Rough Idle Cam Package, DSS 1,000 RWHP Axels, Slowhawk Mustang Dyno Tune, QTP QTEC 66 Low Profile Cutouts and iTSX. 453 RWHP 427 RWTQ WEB LINKS BUILD TIMING CHAIN FAILURE TRANSITION FROM STOCK TO CAM VID

03-10-2012, 03:29 PM	#4
Buffnshine So Cal Camaro5 Race Team Drives: '10 SS/RS, '06 HHR, '70 El Camino Join Date: Sep 2009 Location: Huntington Beach, CA Posts: 2,589 View My Garage	Great idea __________________ TEAM L99 - So Cal Camaro5 Race Team #27 9/5/09 Purchased #36962 Black 1SS/RS L99 "E-TCKT" Base Dyno 328hp/341tq @BBK meet Mods to Date: Window Tint 5% & 15%, ACC P13W Lighting, Adaptive DRL Harness, Ghost Armor, Lloyds "SS" Mats, Dash Plaque, Flowmaster Outlaw Exhaust, Drake Front Bowtie Delete, Stealth 3457 Chrome/Mirror Signal Bulbs, Grant Revolutions Steering Wheel, PFADT Sport Springs, Sway Bars, End Links, Trailing Arms, 4 Wheel Alignment, Hurst Auto Shifter and Paddle Shifter, Satin Black Rear Tail Light Bezels

03-12-2012, 06:42 PM	#6
Maxspeed ~COTW 6/30/14~ Drives: 2011 Camaro SS/RS Join Date: Oct 2011 Location: Mansfield Mass Posts: 2,906 View My Garage	Works perfect. Dont forget to buy some lag bolts. I wouldn't trust the screws that came with it since it hangs over my Camaro. __________________ Mods: Heritage Grill, Blade Spoiler, Corrado Hoodliner Mural, Premium Engine Boxes, Radiator Shroud, Custom Painted Bowties, Dipstick & Engine Caps, RX Catch Can, Corsa cat back exhaust, CAI black powder coat cold air, Apex cold air intake scoop and Apex washer tank relocate kit, Dynatech SuperMAXX Ceramic Coated LT Headers, High Flow Cats, JRE470 Rough Idle Cam Package, DSS 1,000 RWHP Axels, Slowhawk Mustang Dyno Tune, QTP QTEC 66 Low Profile Cutouts and iTSX. 453 RWHP 427 RWTQ WEB LINKS BUILD TIMING CHAIN FAILURE TRANSITION FROM STOCK TO CAM VID

03-12-2012, 10:50 AM	#5
Adam's Polishes Drives: The shiny ones. Join Date: Mar 2010 Location: In the detail shop! Posts: 5,979	PERFECT! I actually have seen that exact hanger in the garage organization section of lowes... I'll have to grab one.

03-13-2012, 09:04 AM	#7
Moose Moderator Drives: '99 Camaro SS #1392 Join Date: Jun 2006 Location: Newtown, Pa. Posts: 3,982	I just saw a commercial for this product. Have you used it and if so, what did you think? Was it expensive??? Thanks Ed

03-13-2012, 12:53 PM	#8
Maxspeed ~COTW 6/30/14~ Drives: 2011 Camaro SS/RS Join Date: Oct 2011 Location: Mansfield Mass Posts: 2,906 View My Garage	I used it for the first time yesterday. It blew the CB for my 15 amp service in my garager but ran an extsenion cord from the 20 amp service in the kitchen and had no problems. It worked great. Got all the water out of every crevice and dried the grill nicely. Next time I will open the doors and blow off the jambs. Be careful around the channels on the roof as it lifted one slightly, but it popped back in place. It cost $308 and according to Adams will increase to $338 in April. Was expensive but a great way to dry the car. __________________ Mods: Heritage Grill, Blade Spoiler, Corrado Hoodliner Mural, Premium Engine Boxes, Radiator Shroud, Custom Painted Bowties, Dipstick & Engine Caps, RX Catch Can, Corsa cat back exhaust, CAI black powder coat cold air, Apex cold air intake scoop and Apex washer tank relocate kit, Dynatech SuperMAXX Ceramic Coated LT Headers, High Flow Cats, JRE470 Rough Idle Cam Package, DSS 1,000 RWHP Axels, Slowhawk Mustang Dyno Tune, QTP QTEC 66 Low Profile Cutouts and iTSX. 453 RWHP 427 RWTQ WEB LINKS BUILD TIMING CHAIN FAILURE TRANSITION FROM STOCK TO CAM VID

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Master Blaster Car Dryer Sale	southerncarparts	Wash/Wax/Detailing and Cosmetic Maintenance Parts	46	04-04-2023 01:30 AM
Ordered Master Blaster Cant wait	2ss2012	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	17	02-15-2012 11:40 PM
Adam's Air Force Master Blaster Car Dryer by MetroVac	Maxspeed	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	44	02-12-2012 09:06 PM
ADAM'S AIR FORCE MASTER BLASTER CAR DRYER	crabapple	Wash/Wash/Detailing and Cosmetic Maintenance Parts	2	08-24-2011 06:02 PM
master blaster	steelmart	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	5	02-16-2009 08:45 PM