08-27-2009, 02:39 PM | #1 |
Account Suspended
Drives: Cargo van. Join Date: Jul 2009
Location: Metal Metal Land
Posts: 1,247
|
Just installed supemaxx headers on l99.
First of all let me say this is a great quality product. It came with new gaskets and header bolts, unlike some other brands. Plus there was no cutting required of the stock exhaust, again unlike a some other brands.
On that note, installing these on jack stands isnt really that bad. I mostly followed the instructions but I didnt remove the spark plugs because if your not a bumbling idiot you should be able to get the header up without cracking them. It took me about 3 hours start to finish with a few breaks here and there (it was muggy as a mofo). My only advice is wear gloves. My hands look like a child rapists hands they have so many cuts and scratches on them. Other than that everything is pretty straight forward. I dont know if Im digging the sound yet. I think it needs a cam. |
08-27-2009, 02:43 PM | #2 |
Petro-sexual
|
You may reconsider the way you describe how your hands look...
Otherwise - WHERE ARE THE PICS'?
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
08-27-2009, 02:45 PM | #3 |
|
I haven't seen anything about supermaxx headers. Are they long tube and what is the size of the primaries. Did you pruchase with high flow cats and how much are they?
I'm curious to know how much horsepoer they are expected to provide too. Have you seen any dyno results? edit: nevermind, this is the Dynatech Supermaxx headers. I didn't realize they had another name. Did you install high flow cats or just headers? Do you have pics of the mid/cat section?
__________________
Used Racing Brake 2 Peice Rotors for sale:
http://www.camaro5.com/forums/showthread.php?t=344754 Summit White 2014 2SS 1LE Recaros, NPP exhaust, Nav 2010 2SS A6 - sold. |
08-27-2009, 02:50 PM | #4 | |
hmmmmm
Drives: 2010 IOM in-n-out 2SS Join Date: Oct 2008
Location: San Jose, Ca
Posts: 1,325
|
Quote:
vid clip of sound?
__________________
"Responsibility is a Heavy Responsibilty" (Cheech)
|
|
08-27-2009, 02:54 PM | #5 |
Account Suspended
Drives: Cargo van. Join Date: Jul 2009
Location: Metal Metal Land
Posts: 1,247
|
Well if I saw my hands on someone else I would think there were child bite marks and scratches all on his hands.(btw my wife came up with that and called me pedophile hands) Ill get pics up as soon as all the grease and bits of blood and skin get cleaned off the motor. LOL.
It wouldnt be that bad with a decent adjustable ratchet, but mine broke and I was stuck with a junk plain jane craftsman with 0 leverage ability. Ill get a sound clip and pics tomorrow when I skate out of work early for court. |
08-27-2009, 03:03 PM | #6 |
Drives: 2020 ZLE 67 SS350 Join Date: Jul 2008
Location: Kentucky
Posts: 537
|
How much?
Where did you order them from? What are your thoughts on quality? Did you get with or w/o cats...
__________________
Thanks,
thecamaroguy 2010 Camaro 2SS - CGM 1967 Camaro SS350 - Baldwin Motion Tribute 2020 Camaro ZL1 1LE - White Proud to say I have always owned a Camaro! A Camaro has been my Daily driver since I started driving! |
08-27-2009, 06:49 PM | #7 |
Account Suspended
Drives: Cargo van. Join Date: Jul 2009
Location: Metal Metal Land
Posts: 1,247
|
I ordered them from speedinc.com for about $1,300 with cats. They have 4 bolt flanges so you get a good seal at the collectors. Im pretty happy with them. I dont know if any other headers would make me happier? I was going to order Kooks but they said they were on back order. They are also putting them on their blown ss so I figured it would be good enough for my car.
|
08-27-2009, 06:56 PM | #8 |
Drives: 2010 2SS/Black Join Date: Mar 2009
Location: Tucson, AZ
Posts: 608
|
__________________
2010 Black 2SS L99
Mods: * CAI Intake * Magnuson MP2300 TVS Supercharger/RDS Spacer * Vector Motorsports Tune * Stainless Power LT/Hi Flow Cats/Tru X-* Pipe/36" J-Pipes/40 Series * R1 Concepts ceramic pads and slotted/drilled rotors |
08-27-2009, 06:58 PM | #9 |
Booya
Drives: Black 2010 2SS/RS Join Date: Oct 2008
Location: PA
Posts: 361
|
It's ok, I laughed.. some us here do have a sense of humor.
__________________
2010 Camaro SS/RS RP6 | 2SS package, M6, black, black leather
|
08-27-2009, 07:16 PM | #10 |
Whipped
|
good info.
I have a magnaflow catback system.. looking to do headers in the future.
__________________
|
08-27-2009, 07:24 PM | #11 |
Account Suspended
Drives: Cargo van. Join Date: Jul 2009
Location: Metal Metal Land
Posts: 1,247
|
FYI the stock l99 manifolds and cats weigh almost 25lbs each. And, I forgot to weigh the headers and highflow cats.
|
08-27-2009, 07:26 PM | #12 |
Drives: 2010 CGM SS/RS COTW 7/5/2010 Join Date: Oct 2008
Location: Salinas, ca
Posts: 1,817
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Headers for an L99 Automatic.....17/8 or 1 3/4 ? | Jekyll-N-Hyde | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 34 | 08-02-2010 01:54 PM |
JBA releases exhausts, headers and midpipes. | Bewenched | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 17 | 09-16-2009 03:04 PM |
Doug Thorleys headers installed | norcalwheelman | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 34 | 07-23-2009 11:48 AM |
Check your Order here | bvonscott | Camaro Price | Ordering | Tracking | Dealers Discussions | 665 | 06-29-2009 01:00 PM |
LMR CAI and AR headers installed on L99! | Late Model Racecraft | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 16 | 06-22-2009 06:50 AM |