Cordon CR-1??? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JHall651 · 11-23-2012, 09:27 AM

Anyone running these? If so how do you like them. I think they are the best looking mesh rims with an awesome concave, I'm just curious why you don't hear more people talking about them.

caper · 11-23-2012, 10:55 AM

i have them. been on for over a year now. LOVE the look...dont regret getting them for a second. and you are right, the rear has a DEEP concave

JHall651 · 11-23-2012, 12:29 PM

Where did you get them and how much? What are your sizes? Is your car lowered? Is there any rubbing?

terry_b · 11-23-2012, 06:21 PM

I would also like to know where these came from...

caper · 11-23-2012, 07:18 PM

i got mine from D1 autosport, cost 2k . 20x10 front with 275 tires , 20x10.5 rear...with 315's. i am not lowered, BUT i did get rubbing once on the rear...BIG dip on the freeway that i hit doin about 85 or more with a larger lady in the back seat. i understand my sportmax 315s are a bit wider than other 315s because others bought these with NO rubbing. it was also a REALLY big dip...i couldnt believe it wasnt marked!

i really love the stance on the car, its about as agressive as you can get and out of all the wheels i seen before and since, i am still very very happy with mine!!

caper · 11-23-2012, 07:20 PM

wheels

JHall651 · 11-24-2012, 10:53 PM

Hmmm just doesn't seem to be a good fit for these cars. Unfortunate they do not offer more sizes and offsets. I am having the Pfadt stage 4 kit installed and lowering 1" so I don't think these will work. I really like the look of the concave. I will more in likely be going with the TSW Nrings, just wish the Nrings had a concave version.

caper · 11-25-2012, 12:43 PM

loys of other guys are running a little thinner 315 and are lowered and dont rub at all. blizzard is one of them on here. i dont see how you would have any issues IMO

NightRiderRS · 11-25-2012, 12:59 PM

These are mine lowered with 1.5-1.4 h&r springs.

http://www.camaro5.com/forums/showth...ghlight=cordon

JHall651 · 11-25-2012, 02:38 PM

Still looks like they will rub. Plus I don't want to go with a lower profile tire because I am trying to use my HP not leave it on the pavement.

caper · 11-25-2012, 04:49 PM

up to you, but with everyone but me never rubbing, even though lowered, with 315 35 20 tires on , im not quite sure you are basing your decision on fact. btw i autocrossed my car and it never rubbed at all. ill keep mine

btw by thinner, i didnt mean in profile...not every 315 measures the same width across the tread...

JHall651 · 11-25-2012, 05:20 PM

Quote:

Originally Posted by caper

up to you, but with everyone but me never rubbing, even though lowered, with 315 35 20 tires on , im not quite sure you are basing your decision on fact. btw i autocrossed my car and it never rubbed at all. ill keep mine

btw by thinner, i didnt mean in profile...not every 315 measures the same width across the tread...

Oh so by thinner you meant wider. Well like I said I think there are awesome looking. I am just afraid of rubbing. If you auto cross and they don't rub then that's really good.

2SS45th · 11-25-2012, 06:04 PM

Don't lower your car if you are worried about rubbing, you will want a taller tire, because that stage 4 is gonna ride like a rock.

NightRiderRS · 11-25-2012, 06:10 PM

With my alignment set at whatever the stock alignment was i did rub. I had to adjust the camber out to 1.5 degrees on the rear to quit rubbing. i have a v6 and i can gas it around 1/4 throttle and spinn.

11-23-2012, 09:27 AM	#1
JHall651 Drives: 2012 Camaro 2SS LS3 Ashen Grey Join Date: Mar 2012 Location: Chicago, IL Posts: 478	Cordon CR-1??? Anyone running these? If so how do you like them. I think they are the best looking mesh rims with an awesome concave, I'm just curious why you don't hear more people talking about them. __________________ 2012 2SS/RS, Magna TVS2300, RX Catch Can, Borla S-Type, Pfadt Stage 4 w/ ZL Spec Sway Bars, ADM Custom Boost/AFR Gauges, Hurst Short Throw, Forgestar F14 Matte Black 20x11 & 20x9.5 Deep Concave all 4, Nitto Invo 315/35 & 275/40, Heritage Grill, Sparks Black Grill SS & Trunk SS, P13W Fog Lights (cool white) w/ DRL Harness, Blacked Out Brake light bezels, Xpel Smoke Light Kit

11-23-2012, 12:29 PM	#3
JHall651 Drives: 2012 Camaro 2SS LS3 Ashen Grey Join Date: Mar 2012 Location: Chicago, IL Posts: 478	Where did you get them and how much? What are your sizes? Is your car lowered? Is there any rubbing? __________________ 2012 2SS/RS, Magna TVS2300, RX Catch Can, Borla S-Type, Pfadt Stage 4 w/ ZL Spec Sway Bars, ADM Custom Boost/AFR Gauges, Hurst Short Throw, Forgestar F14 Matte Black 20x11 & 20x9.5 Deep Concave all 4, Nitto Invo 315/35 & 275/40, Heritage Grill, Sparks Black Grill SS & Trunk SS, P13W Fog Lights (cool white) w/ DRL Harness, Blacked Out Brake light bezels, Xpel Smoke Light Kit

11-23-2012, 07:20 PM	#6
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,545	wheels Attached Images

11-24-2012, 10:53 PM	#7
JHall651 Drives: 2012 Camaro 2SS LS3 Ashen Grey Join Date: Mar 2012 Location: Chicago, IL Posts: 478	Hmmm just doesn't seem to be a good fit for these cars. Unfortunate they do not offer more sizes and offsets. I am having the Pfadt stage 4 kit installed and lowering 1" so I don't think these will work. I really like the look of the concave. I will more in likely be going with the TSW Nrings, just wish the Nrings had a concave version. __________________ 2012 2SS/RS, Magna TVS2300, RX Catch Can, Borla S-Type, Pfadt Stage 4 w/ ZL Spec Sway Bars, ADM Custom Boost/AFR Gauges, Hurst Short Throw, Forgestar F14 Matte Black 20x11 & 20x9.5 Deep Concave all 4, Nitto Invo 315/35 & 275/40, Heritage Grill, Sparks Black Grill SS & Trunk SS, P13W Fog Lights (cool white) w/ DRL Harness, Blacked Out Brake light bezels, Xpel Smoke Light Kit

11-25-2012, 02:38 PM	#10
JHall651 Drives: 2012 Camaro 2SS LS3 Ashen Grey Join Date: Mar 2012 Location: Chicago, IL Posts: 478	Still looks like they will rub. Plus I don't want to go with a lower profile tire because I am trying to use my HP not leave it on the pavement. __________________ 2012 2SS/RS, Magna TVS2300, RX Catch Can, Borla S-Type, Pfadt Stage 4 w/ ZL Spec Sway Bars, ADM Custom Boost/AFR Gauges, Hurst Short Throw, Forgestar F14 Matte Black 20x11 & 20x9.5 Deep Concave all 4, Nitto Invo 315/35 & 275/40, Heritage Grill, Sparks Black Grill SS & Trunk SS, P13W Fog Lights (cool white) w/ DRL Harness, Blacked Out Brake light bezels, Xpel Smoke Light Kit

11-23-2012, 10:55 AM	#2
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,545	i have them. been on for over a year now. LOVE the look...dont regret getting them for a second. and you are right, the rear has a DEEP concave

11-23-2012, 06:21 PM	#4
terry_b Drives: 2014 2SS/RS 1LE Join Date: Apr 2010 Location: Hudson, MA Posts: 1,387 View My Garage	I would also like to know where these came from...

11-23-2012, 07:18 PM	#5
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,545	i got mine from D1 autosport, cost 2k . 20x10 front with 275 tires , 20x10.5 rear...with 315's. i am not lowered, BUT i did get rubbing once on the rear...BIG dip on the freeway that i hit doin about 85 or more with a larger lady in the back seat. i understand my sportmax 315s are a bit wider than other 315s because others bought these with NO rubbing. it was also a REALLY big dip...i couldnt believe it wasnt marked! i really love the stance on the car, its about as agressive as you can get and out of all the wheels i seen before and since, i am still very very happy with mine!!

11-25-2012, 12:43 PM	#8
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,545	loys of other guys are running a little thinner 315 and are lowered and dont rub at all. blizzard is one of them on here. i dont see how you would have any issues IMO

11-25-2012, 12:59 PM	#9
NightRiderRS Drives: Black RS Join Date: Aug 2011 Location: Buda, TX Posts: 69	These are mine lowered with 1.5-1.4 h&r springs. http://www.camaro5.com/forums/showth...ghlight=cordon

11-25-2012, 04:49 PM	#11
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,545	up to you, but with everyone but me never rubbing, even though lowered, with 315 35 20 tires on , im not quite sure you are basing your decision on fact. btw i autocrossed my car and it never rubbed at all. ill keep mine btw by thinner, i didnt mean in profile...not every 315 measures the same width across the tread...

11-25-2012, 06:04 PM	#13
2SS45th Drives: 11 Seconds or Faster Join Date: May 2012 Location: Arvada, Colorado Posts: 2,797 View My Garage	Don't lower your car if you are worried about rubbing, you will want a taller tire, because that stage 4 is gonna ride like a rock. __________________ I Ain't About That Stock Life.

11-25-2012, 06:10 PM	#14
NightRiderRS Drives: Black RS Join Date: Aug 2011 Location: Buda, TX Posts: 69	With my alignment set at whatever the stock alignment was i did rub. I had to adjust the camber out to 1.5 degrees on the rear to quit rubbing. i have a v6 and i can gas it around 1/4 throttle and spinn.