07-09-2012, 11:37 PM | #1 |
Drives: 2010 2LT / RS - 2013 ZL1 Join Date: Aug 2010
Location: Vancouver
Posts: 519
|
ZL1 Flaps?
Just wondering if there is mud flaps or something for the ZL1? You know, help protect crap from the tires flying onto the paint especially the quarter panels.
__________________
Current Status: MINE!!!! 12/6/12
1000 - Initial Order 6/27/12 1100 - Preliminary order accepted 6/27/12 - QKVTPV 2000 - Order accepted by GM 2500 - Order preferenced 3000 - Order accepted by production control 3100 - Order available to sequence 3300 - Order scheduled for production 3400 - Order broadcast 3800 - Order produced 4000 - Available to ship 4104 - Bailment Invoice 4200 - Shipped 4300 - Intermediate Delivery 4B00 - Bayed |
07-09-2012, 11:59 PM | #2 |
I used to be Dragoneye...
|
I don't know of anything...the rear is pretty well protected from the factory aero "deflectors"...the fronts....I'm not sure anything can cover those tires without catching a whole lot of wind....
|
07-10-2012, 03:42 AM | #3 |
Drives: 2012 ZL1, 00016 Join Date: Jan 2012
Location: Whitesville, NY
Posts: 265
|
I have noticed several very small stone pecks on the "gills" of mine as well. I am going to have them buffed out and put a 3M protectant in that area.
|
07-10-2012, 05:13 AM | #4 |
Drives: 2010 2LT / RS - 2013 ZL1 Join Date: Aug 2010
Location: Vancouver
Posts: 519
|
Guess 3M is the only real solution...
__________________
Current Status: MINE!!!! 12/6/12
1000 - Initial Order 6/27/12 1100 - Preliminary order accepted 6/27/12 - QKVTPV 2000 - Order accepted by GM 2500 - Order preferenced 3000 - Order accepted by production control 3100 - Order available to sequence 3300 - Order scheduled for production 3400 - Order broadcast 3800 - Order produced 4000 - Available to ship 4104 - Bailment Invoice 4200 - Shipped 4300 - Intermediate Delivery 4B00 - Bayed |
07-10-2012, 05:31 AM | #5 | |
Drives: 2017 Bright Yellow ZL1 6spd Join Date: May 2010
Location: Central MA
Posts: 642
|
Quote:
I had mine done. The whole dogleg, all the way up to the body line. They weren't sure if it would hold itself in the gills, but it worked out just fine. On thing I didn't have done, but will be done next week, is the bottom of the doors and in front of the front tire. I had my car detailed last week, and they pointed out to me the pitting that has already occurred after 1000 miles. |
|
07-10-2012, 06:16 AM | #6 |
Drives: Camaro RS 2SS Join Date: Nov 2011
Location: New Cumberland, PA
Posts: 44
|
try XPEL, its a lot better than 3m. just make sure you find a dealer who knows what they are doing. Mine is getting a full hood, A-pillars, gill area, full fenders, partial roof.
|
07-10-2012, 07:23 AM | #7 |
I had Xpel put on my gills and also added these low profile splash guards to the front
|
|
|
|
|
|