06-24-2013, 05:48 PM | #1 |
Drives: 2011 1ss Join Date: Jan 2013
Location: birmingham, al
Posts: 112
|
What are you guys paying for cam installs.
I'm looking to cam my car and just wondering a general price. I'm hoping to do this as a gift for my birthday in August. I wish I could find someone in the southeast near Alabama that could do a cam install and tune it within a day or two.
__________________
2003 2500HD 6.0 4x4 -daily
2011 1ss LS3. Stainless power longtubes, slp blackwing intake, muffler delete, tune. 410Rwhp 405rwtq |
06-24-2013, 05:54 PM | #2 |
Drives: Florida Speed & Power Join Date: Jan 2011
Location: Pinellas Park, FL
Posts: 3,185
|
http://www.camaro5.com/forums/showthread.php?t=274673
We are not that far. Good excuse to visit the beach for a few days |
06-24-2013, 06:18 PM | #3 |
Drives: 11 IBM n White 2SS/RS M6 Join Date: May 2011
Location: Tewksbury Ma
Posts: 358
|
I would be looking for shop hourly rates and expected time to do the install of the cam with supporting components springs hardened pushrods trunion upgrade etc.. and then the tune, different shops are more than likley different shop rates based off you're location..
you will also need to budget in the extras new oil and coolant probably a timing chain etc etc etc etc etc... as the list goes one the cost increases.. it all adds up, but you should do things once if you're going in to the internals.. my $0.02
__________________
Black CIA -Powder Coated Red Air Scoop - Vmax Ported Throttle Body - Ceramic Coated Dynatek Headers - High Flow Cats out thru factory Cat Back - JRE rough idle cam package - Trunion Upgrade - Valve Springs - Hardened Push rods - 3 bolt timing gear - SLP Under drive pully- Washer bottle relo kit - Hurst Short Throw Shifter with updated pin bushing from C5 member NH-SS - IdealG's improved Master Cylinder - GTO Clutch reservoir - L99 Brake Reservoir - Stainless Braided clutch line - wrapped up with a JRE Tune My SS layed down 462 hp on JRE's Superflow Dyno
|
06-24-2013, 06:34 PM | #4 |
Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012
Location: Vance Alabama
Posts: 8,019
|
Dave with the g8 gt in bham does swaps. I can help too. He's going to help me with mine this winter.
__________________
Retired wanna be cylinder head porter
2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X |
06-24-2013, 06:42 PM | #5 | |
Drives: Florida Speed & Power Join Date: Jan 2011
Location: Pinellas Park, FL
Posts: 3,185
|
Quote:
|
|
06-24-2013, 06:50 PM | #6 |
Drives: 11 IBM n White 2SS/RS M6 Join Date: May 2011
Location: Tewksbury Ma
Posts: 358
|
I did! good deal for the folks in you're area looking get the bump stick and supporting parts n pieces installed n tuned up
__________________
Black CIA -Powder Coated Red Air Scoop - Vmax Ported Throttle Body - Ceramic Coated Dynatek Headers - High Flow Cats out thru factory Cat Back - JRE rough idle cam package - Trunion Upgrade - Valve Springs - Hardened Push rods - 3 bolt timing gear - SLP Under drive pully- Washer bottle relo kit - Hurst Short Throw Shifter with updated pin bushing from C5 member NH-SS - IdealG's improved Master Cylinder - GTO Clutch reservoir - L99 Brake Reservoir - Stainless Braided clutch line - wrapped up with a JRE Tune My SS layed down 462 hp on JRE's Superflow Dyno
|
06-24-2013, 07:38 PM | #7 |
Drives: 2010 Camaro 1SS/RS RJT Join Date: Jan 2010
Location: NJ
Posts: 831
|
I would look at FSP, I dealt with Matt when he was up at ECS great guy to deal with.
__________________
2010 Camaro SS LS3 Holley Hi-Ram Manifold,Custom grind boost cam,Vortech V-3,10Rib 3.47 Pully Airfilter Pipe Delete, 10 PSI, TSP LT Headers, Flowmaster Outlaws, Alky Control Meth Kit, PFADT 1.25, ZL1 Fuel Pump, DSS 1000HP axles, Mantic ER2 Clutch, Full BMR rear suspension drag pack upgrade. C6 Vette 18 rims with M/T 305 out back. COPO Hood
Race Proven Motorsports tuned |
06-24-2013, 08:11 PM | #8 |
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 4,585
|
Feel free to give us a call here at lethal racing. Remember, if the price is too cheap you want to question the brand/quality of parts being used. We use only name brand parts!
|
06-24-2013, 08:17 PM | #9 |
Drives: 2011 LS3 Join Date: Jan 2012
Location: el paso tx
Posts: 547
|
I was quoted for 1500 cam install only no dyno or tune. This is in el paso tx so there's really no LS shops around here.
__________________
Vararam
Stainless Works Headers Vmax TB SLP loudmouth 2 Nightfury Cam Mike Norris CC Tuned by Southwest Speed |
06-24-2013, 08:23 PM | #10 |
Drives: 2SS/RS - Black - GFX Join Date: Nov 2008
Location: B'ham, Alabama
Posts: 2,458
|
Let me know if either of you need help or tools. I did mine in my garage a while back. I live in t-town, work in b'ham.
__________________
Ordered: 10-13-08
Built: 3-30-09 (#1691) Recieved: 6-12-09 Blacked out, Cammed (Lunati Voodoo 233/245, .578/.598 @114°, +4°), ARH LTs, VR OTR CAI, Cutouts, and lots of other fun mods. |
06-24-2013, 08:27 PM | #11 |
Drives: 2010 Camaro SS/RS 6spd Join Date: Sep 2009
Location: Jefferson, Ga
Posts: 4,399
|
Roughly $2500+- depending in options! Try MTI! They are in Cobb Co in Ga, maybe a 2 or 3 hour drive, not sure! But that's the closest u know of!
__________________
|
06-24-2013, 08:40 PM | #12 |
My install and tune was $1,500. Turnaround for me was about 3 days IIRC. Good luck and find a good shop with a good tuner. DO NOT compromise or you will regret it. Do it once and do it right, might cost more upfront but will save you tons on the backside.
__________________
2011 IBM 2SS/RS - LS3/M6 - Grey Interior
Full bolt-ons + TSP 229/236, 112 LSA Tuned by STARKWEATHER PERFORMANCE BMR Stage 3 suspension MRR 288 - 20x10(+35), 20x11(+43) |
|
06-24-2013, 09:02 PM | #13 |
¡ʇuɐıןןıɹq
Drives: 2011 Camaro IOM 2SS/RS Join Date: Dec 2010
Location: Decatur, Illinois
Posts: 2,600
|
Nothing . Tracy and RX really took care of me after my motor exploded. Since I got a new LS3 to replace my L99 he only charged me for the price of the custom cam and supporting parts.
From my Note |
06-24-2013, 09:07 PM | #14 | |
Future Mopar Owner
Drives: 2011, 2SS/RS, Synergy Join Date: Aug 2012
Location: TN
Posts: 2,373
|
Quote:
And honestly you don't want a cam swap and a tune done in a day or two.
__________________
2005 GTO-IBM-A4-Sold
2011 Camaro SS/RS Synergy-1 of 255-Sold You will be missed but you are in good hands! 2019 Challenger Hellcat B5, Redeye, Widebody |
|
|
|
|
|