Opinions on SLP SS Badges - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MAZZ77X · 11-11-2010, 08:24 PM

Gonna get these this week and want to hear from those that have them.
http://www.slponline.com/view_product.asp?P=100032A

Are they good quality?
Easy to install?
Fit and Finish?
Overall impressions?

Basically any info you could share about these would be great. I know SLP makes nice stuff and I'm hoping these are no different cause I hate the gold bowtie's!!!

Pics would be great too.

Thanks, Anthony

mbrusco103 · 11-11-2010, 11:26 PM

i hear good things about them as far as quality
imo this style of ss looks too classic for a modern camaro but too each his own

2010 SSRS · 11-11-2010, 11:27 PM

they are nice, but I'm waiting for somebody to make red 5th gen style SS.

Buffnshine · 11-11-2010, 11:34 PM

They are very good quality adn if you like that classic look I would get. i just dont like the mixing of the two styles from the outside to the inside

Silver2SSRS6spd · 11-11-2010, 11:45 PM

I love mine and they set the car off a bit from the norm, IMO, this is how they should have come from the factory. GM is going for the retro, why did they square out the SS emblems. The bowties are a joke, no way to easily tell the V6 apart from the V8 without looking for the mail slot.

Are they good quality? Yes, very good
Easy to install? Medium effort, you need to remove the front and rear bowties which require a little patience .
Fit and Finish? Very good finish, the fit for the front one could be a little better since it sticks out a little. Not that bad and most will not notice.
Overall impressions? Love them!

clg_98ta · 11-12-2010, 07:50 AM

I have'em and like'em. They're plastic, but the mounting pad is a perfect fit and the letters look great. Gives you the classic look.

Wild Bill · 11-12-2010, 08:18 AM

Quote:

Originally Posted by MAZZ77X

Gonna get these this week and want to hear from those that have them.
http://www.slponline.com/view_product.asp?P=100032A

Are they good quality?
Easy to install?
Fit and Finish?
Overall impressions?

Basically any info you could share about these would be great. I know SLP makes nice stuff and I'm hoping these are no different cause I hate the gold bowtie's!!!

Pics would be great too.

Thanks, Anthony

I have an IOM and have done the front and rear. Piece of cake installation as long as you are patient. The rear Bowtie has alot of glue. Make sure you have a good glue solvent.

I love the look. I am still debating taking off the smaller red SS logos in the back and front.

al moeckel · 11-12-2010, 08:46 AM

love mine . i just put them on the front. good quality.

*TAG UR IT* · 11-12-2010, 08:50 AM

I prefer the 5th Gen style font emblems vs the retro SS style. We had a group on here who were trying to make the 5th gen font SS's, but licensing became a problem.

ron10 · 11-12-2010, 09:10 AM

Quote:

Originally Posted by 2010 SSRS

they are nice, but I'm waiting for somebody to make red 5th gen style SS.

sparks restorations will have them out after the first of the year.

scythezo6 · 11-12-2010, 09:52 AM

There are already several of us who have the 5th gen style. I have red with flat black outlined, there's one guy with white and chrome outlined and another with CGM with black outlined.

daphatgrant · 11-12-2010, 10:00 AM

I'm not a fan of that particular script, I don't like the way it looks on a modern Camaro.

Silver2SSRS6spd · 11-12-2010, 10:22 AM

Quote:

Originally Posted by Wild Bill

I have an IOM and have done the front and rear. Piece of cake installation as long as you are patient. The rear Bowtie has alot of glue. Make sure you have a good glue solvent.

I love the look. I am still debating taking off the smaller red SS logos in the back and front.

Removing the original SS emblems is a must when doing this mod. The rear one comes off very easy with some dental floss, the front one takes some work but comes off cleanly.

Nav Basra · 11-12-2010, 10:41 AM

Any ideas on how to put the front ones on a heritage grill?

11-11-2010, 08:24 PM	#1
MAZZ77X www.njminigp.com Drives: 2010 IOM SS M6 Join Date: Nov 2010 Location: Hammonton N.J. Posts: 33	Opinions on SLP SS Badges Gonna get these this week and want to hear from those that have them. http://www.slponline.com/view_product.asp?P=100032A Are they good quality? Easy to install? Fit and Finish? Overall impressions? Basically any info you could share about these would be great. I know SLP makes nice stuff and I'm hoping these are no different cause I hate the gold bowtie's!!! Pics would be great too. Thanks, Anthony __________________ 2010 SS Inferno Orange 6 speed.

11-11-2010, 11:26 PM	#2
mbrusco103 Drives: 2011 2SS/RS (M6) 427 Twin Turbo Join Date: May 2008 Location: NJ Posts: 1,090 View My Garage	i hear good things about them as far as quality imo this style of ss looks too classic for a modern camaro but too each his own __________________ 2011 Camaro 2SS/RS ERL 427 M6 TT -AGP Twin Turbo 55/57 .83ar \| ERL 427ci \| Squash Fuel System \| Stainless Works Chambered 3" \| Mcleod RXT \| Factory Hurst Short Throw \| Black Forgestar F14s \| CTS V 6 Piston Brembo \| VIS AMS Carbon Fiber Hood \| Anvil Carbon Fiber Spoiler

11-11-2010, 11:27 PM	#3
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	they are nice, but I'm waiting for somebody to make red 5th gen style SS. __________________ Jannetty Racing JRE Street Package

11-11-2010, 11:34 PM	#4
Buffnshine So Cal Camaro5 Race Team Drives: '10 SS/RS, '06 HHR, '70 El Camino Join Date: Sep 2009 Location: Huntington Beach, CA Posts: 2,589 View My Garage	They are very good quality adn if you like that classic look I would get. i just dont like the mixing of the two styles from the outside to the inside __________________ TEAM L99 - So Cal Camaro5 Race Team #27 9/5/09 Purchased #36962 Black 1SS/RS L99 "E-TCKT" Base Dyno 328hp/341tq @BBK meet Mods to Date: Window Tint 5% & 15%, ACC P13W Lighting, Adaptive DRL Harness, Ghost Armor, Lloyds "SS" Mats, Dash Plaque, Flowmaster Outlaw Exhaust, Drake Front Bowtie Delete, Stealth 3457 Chrome/Mirror Signal Bulbs, Grant Revolutions Steering Wheel, PFADT Sport Springs, Sway Bars, End Links, Trailing Arms, 4 Wheel Alignment, Hurst Auto Shifter and Paddle Shifter, Satin Black Rear Tail Light Bezels

11-11-2010, 11:45 PM	#5
Silver2SSRS6spd Prefer to be blown! Drives: 2010 Silver/Black 2SS/RS Manual Join Date: Mar 2010 Location: Nor-Cal Posts: 2,677 View My Garage	I love mine and they set the car off a bit from the norm, IMO, this is how they should have come from the factory. GM is going for the retro, why did they square out the SS emblems. The bowties are a joke, no way to easily tell the V6 apart from the V8 without looking for the mail slot. Are they good quality? Yes, very good Easy to install? Medium effort, you need to remove the front and rear bowties which require a little patience . Fit and Finish? Very good finish, the fit for the front one could be a little better since it sticks out a little. Not that bad and most will not notice. Overall impressions? Love them! Attached Images __________________ MagnaCharger TVS-2300 550rwhp 540 rwt and a radical suspension under the car.

11-12-2010, 07:50 AM	#6
clg_98ta Drives: 2010 Camaro 2SS Join Date: Jan 2010 Location: Austin, TX Posts: 2,698 View My Garage	I have'em and like'em. They're plastic, but the mounting pad is a perfect fit and the letters look great. Gives you the classic look. __________________ Black 2SS ordered 1/4/2010, received 2/19/2010

11-12-2010, 08:46 AM	#8
al moeckel Drives: 2011 camaro ss/rs Join Date: Sep 2010 Location: ms Posts: 30	love mine . i just put them on the front. good quality. __________________ pops

11-12-2010, 08:50 AM	#9
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,558 View My Garage	I prefer the 5th Gen style font emblems vs the retro SS style. We had a group on here who were trying to make the 5th gen font SS's, but licensing became a problem.

11-12-2010, 09:52 AM	#11
scythezo6 Virologist in the making Drives: 2010 VR SS/RS LS3 Join Date: Aug 2009 Location: El Paso TX Posts: 2,865	There are already several of us who have the 5th gen style. I have red with flat black outlined, there's one guy with white and chrome outlined and another with CGM with black outlined. __________________ Victory Red 1SS/RS Ordered - 8/4/09 & Joined Camaro5.com family 6000, Delivered to the customer - 12/21/09

11-12-2010, 10:00 AM	#12
daphatgrant June '10 Drives: '10 2SS/RS RJT Join Date: Jul 2009 Location: Upstate NY (FingerLakes) Posts: 2,395	I'm not a fan of that particular script, I don't like the way it looks on a modern Camaro. __________________ RJT, 2SS/RS, M6, Black Int, Sunroof. (Click above image to learn about UpstateC5)

11-12-2010, 10:41 AM	#14
Nav Basra Drives: 2010 Camaro SS 6M Join Date: Feb 2010 Location: Farmington Hills, MI Posts: 21	Any ideas on how to put the front ones on a heritage grill? __________________ ______________________________________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2001 SS, Black/Black, M6, T-Top, H/C, 6,100 Original Miles.	Kilo-9	Autos For Sale / Wanted	13	07-01-2010 08:13 AM
Brand new here, need clarity on the SS front/rear badges please!	jaythree	Cosmetics and Lighting Modification Discussions	4	02-15-2010 05:46 PM
aluminum ss badges	klatterblast	Cosmetics and Lighting Modification Discussions	3	02-04-2010 04:36 PM