06-25-2012, 11:17 AM | #15 |
Drives: '10 2SS/RS, MKIII Supras Join Date: May 2010
Location: Houston/Tulsa
Posts: 1,009
|
BMR 1" drop springs here. I love mine. Perfect stance. I only rub the front GFX lip every once in a while when Im not paying attention. Rides like stock to me.
|
06-25-2012, 02:22 PM | #16 |
I'm also new to suspension mods. What exactly do you need? Do you need the springs, sway bars and bushings? Is there anything else I would need?
|
|
06-25-2012, 04:10 PM | #17 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
The 1" BMR lowering springs are good for anyone worried about ground clearance. They give the car a nice stance without sacrificing too much ground clearance.
|
06-25-2012, 04:13 PM | #18 | |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
Quote:
Let us know what you are planning on doing with the car. |
|
06-28-2012, 01:12 PM | #19 |
Drives: 2010 2ss ss/rs abm, 2016 2ss/rs hbm Join Date: Feb 2009
Location: N. Phx, Az
Posts: 1,332
|
Go with the Hotchkis setup, works awesome, priced right.
__________________
URR2SLO - If you're not going fast enough, get out the way......
|
06-28-2012, 02:04 PM | #20 |
I Need a Volunteer!!!
Drives: 2010 Chevy Camaro 2SS/RS Join Date: Nov 2011
Location: Southern Maryland
Posts: 289
|
|
06-28-2012, 02:34 PM | #21 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Video: Birth of a Lowering Spring: Inside Pedders Suspension
May 2, 2012 by Carter Jung Birth of a Lowering Spring: Inside Pedders Suspension Pedders Suspension is a brand that might be familiar to enthusiasts of the domestic aftermarket. For more than six years, Pedders has offered suspension components for Chevy Camaros, Ford Mustangs and Pontiac GTOs. What most don’t know is that the company is far from an upstart in the chassis game. Pedders Suspension has been in business in their home country of Australia for over 60 years, starting back in the mid-1950s rebuilding shock absorbers. Headquartered in Keysborough, just outside of Melbourne in the state of Victoria, Pedders Suspension has a unique business model for their domestic market. Their products are distributed solely through franchised Pedders Suspension retailers, of which there are over 130 in Australia. Think Jiffy Lube, but for suspension needs that range from the inspection and alignment all the way to polyurethane bushings and coilover swaps. Here in the U.S., Pedders’ business model is completely different, utilizing a more traditional distribution route. In their short time in the American market, Pedders’ products have been used by GM, Lingenfelter and Saleen. Pedders sells the gamut of chassis components, including coilovers, polyurethane bushings and CV shafts, but their core product is springs. In fact, Pedders likes to refer to their manufacturing facility as the “World’s Best Spring Plant.” While that’s up for interpretation, having witnessed the birth of a spring, firsthand, we can attest that quality is very much at the core of their values. Here’s how Pedders Suspension springs are made: Birth of a Pedders Spring - Step1 Step 1: Pedders’ springs begin life as steel from BlueScope Steel, an Aussie company headquartered in Melbourne. Instead of sourcing cheaper materials from China or India, Pedders insists upon using steel that is ISO accredited. Birth of a Lowering Spring: Inside Pedders Suspension - Step 2 Step 2: For heating of the metal rods, Pedders relies on gas instead of electricity. With the latter, dips and irregularity in power can cause inconsistencies in the metal. Each rod is baked close to 980 degrees C. Birth of a Lowering Spring: Inside Pedders Suspension - Step 3 Step 3: After the steel is heated up to temperature, the glowing rod is then coiled around a mandrel. The solid steel mandrel does not flex or bow with repetitive use. Pedders has more than 100 different steel mandrels in varying shapes and sizes for varying applications. Birth of a Lowering Spring: Inside Pedders Suspension - Step 4 Step 4: The next stage in the spring production is quenching, a process in which the hot coiled steel is cooled by oil. The spring is still soft at this point, lacking any memory. Birth of a Lowering Spring: Inside Pedders Suspension - Step 5 Step 5: Once the spring is cooled, it goes back into the tempering furnace where the coils are cured. Temperatures are adjusted to suit the gauge of the wire—the thicker, the hotter. Birth of a Lowering Spring: Inside Pedders Suspension - Step 6 Step 6: After another cooling phase, each spring is ground to appropriate size and fitment. Birth of a Lowering Spring: Inside Pedders Suspension - Step 7 Step 7: For the final step in strengthening the steel, each spring is shot peened with military grade shot. Birth of a Lowering Spring: Inside Pedders Suspension - Step 8 Step 8: Pedders scrags 100 percent of their springs. Scragging is a quality-control process where each spring is fully compressed, testing its load for up to 2 mm in variance. Birth of a Lowering Spring: Inside Pedders Suspension - Step 9 Step 9: Before they are boxed and shipped around the world, the springs are powder coated. Powder coating gives a spring its brand-distinctive color and protects it from the elements. Posted with the permission of R & T They just happen to be ON SALE in a great suspension package. http://www.camaro5.com/forums/showthread.php?t=230468 |
06-29-2012, 07:19 AM | #22 |
Gixxer 1000
Drives: 2012 Camaro 1SS M6 Join Date: Mar 2012
Location: Nashville TN
Posts: 216
|
I just ordered the Pfadt springs from APEX Motorsports.
|
06-29-2012, 08:47 AM | #23 |
50th Anniversary Vert
|
Pfadt is on my list.
__________________
|
06-29-2012, 10:14 AM | #24 |
Currently looking at Pedders.
__________________
2012 Camaro 2SS/RS: Black on Black, Hurst
[AAC DRL LED's, AAC LED's for trunk, cabin, license plate, CAI Intake, RX Catch Can, Skip shift eliminator, Pedders Sub-Frame Inserts, Pedders Radius Rod Inserts, Pedders Rack & Pinion Bushing, 1LE front and rear sway bars] |
|
07-05-2012, 04:23 PM | #25 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
BMR, I know you guys know drag racing, do your lowering spring generally work okay with a car that gets drag raced a lot?
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
07-05-2012, 04:53 PM | #26 | |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Quote:
What stage is your build in? |
|
07-05-2012, 05:29 PM | #27 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
I'm about to do a big round of bolt-ons. I've lowered past cars a bit before and still cut good 60's.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
07-05-2012, 06:05 PM | #28 |
Drives: 2010 Camaro, 2006 Z06 Join Date: Feb 2009
Location: SLC, UT
Posts: 3,370
|
Ultimately a drop spring package isn't going to drastically effect your 60" times. Your alignment may need to be adjusted if you're really serious about drag racing and don't mind giving up just a little bit of handling capability... but if you're trying to get out of the hole effectively your driving technique is going to be a much bigger influence than lowering the car.
If you're really serious about drag racing we do offer dedicated drag race packages... but overall drop springs won't have a major effect unless you're a very serious racer. |
|
|
Tags |
bmr, pedders, suspension |
|
|