BBEE PAINT JOB FINISHED! I EXCITED - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

AMERICANMADE · 06-10-2009, 10:20 AM

You could make a few bucks to pay for the job if you would have a draftsman detail the exact striping layout with dimensions, or even better, a full size template. Hint, Hint. I'd be willing to drop a few dollars for a set. These stripes are the best I've seen yet. Awesome!

Primus · 06-10-2009, 10:28 AM

Very nice. I really dig the wide stripes.

Standard-Z · 06-10-2009, 10:31 AM

Looks sharp.

2010 2-Tone · 06-10-2009, 10:35 AM

Looks SSSWWWEEEEEETTT!!!!
My is ordered and I have already spoken to my painter. Those are exactly like the ones I am getting.

jcamere94z28 · 06-10-2009, 11:55 AM

that black 1st gen is GORGEOUS...

ClownGames08 · 06-10-2009, 03:23 PM

Here is a pic I took (not profesional) but it shows the front head on ...a post earlier was asking if I could put this up to see stripes better, here you go GHOSTRIDER hope this helps....glad you like the 1st gen black...I do 2.

ClownGames08 · 06-10-2009, 03:28 PM

The car next to mine on the left is in to get windows tinted and I think he wants to do the same stripes. I know some of you have asked for stripe dimensions and what not, and Im not sure of them but the owner of the shop DAVID at JONES COLLISION CENTER
559-924-2169 said he would be happy to answer any questions or even do the stripes for you. The number is office number and seceratary is an awesome woman by the name Karen just tell them DC sent you(sounds like a commercial) sorry

Kevin@Lingenfelter · 06-10-2009, 03:57 PM

Great looking car!!

: Can't wait to see it in person!

jdurhan · 06-10-2009, 04:02 PM

Looks really sharp!

Love the Black Bowtie.

LDGn63 · 06-10-2009, 04:48 PM

NICE!

did they use any flex additive when painting the rear valence?
THX

Embalmer · 06-11-2009, 10:25 AM

Beautiful! But couldn't do the 3k price tag.... ouch!

Buckbo · 06-12-2009, 04:52 PM

I plan to add stripes similar to yours (I hope they turn out as nice). I don't know much about this so I was wondering; Did you make the stripes the same width but spaced them a little further apart than the stock vinyl? Also, I assume you clearcoated on top but did you stop at the edge of the new paint or clearcoat the entire hood and trunk? I was concerned that two layers of clearcoat may slightly change the yellow color?

06-10-2009, 10:28 AM	#44
Primus 2G1FF1EV0A9113319 Drives: 2010 1LT/RS 6MT Join Date: Oct 2008 Location: St. Louis, MO Posts: 1,139 View My Garage	Very nice. I really dig the wide stripes. __________________ 2010 Camaro 1LT/RS M6 Black 1100: 10/13/2008 2000: 4/02/2009 3000: 4/08/2009 3300: 5/14/2009 3400: 5/21/2009 3800: 5/28/2009 VIN: 2G1FF1EV0A9113319 4000: 5/28/2009 4150: 5/28/2009 4B00: 5/28/2009 Delivered: 6/10/2009

06-10-2009, 10:31 AM	#45
Standard-Z Drives: 1996 Z28 Join Date: Jun 2009 Location: Florida Posts: 126	Looks sharp. __________________

06-10-2009, 03:23 PM	#48
ClownGames08 Drives: 69 z28/ 69 572/ 2010 BBEE LPE Join Date: Jun 2009 Location: All 3 in Garage Posts: 20	Here is a pic I took (not profesional) but it shows the front head on ...a post earlier was asking if I could put this up to see stripes better, here you go GHOSTRIDER hope this helps....glad you like the 1st gen black...I do 2. Attached Images

06-10-2009, 04:48 PM	#52
LDGn63 Drives: WNABEE Join Date: Jan 2009 Location: DFW Posts: 538 View My Garage	NICE! did they use any flex additive when painting the rear valence? THX __________________ Why oh Why? Windshield=10" vertical mirror= 3 7/8" (that's almost 4") vertical that means that the mirror is 38.75% the size of the vertical windshield... it sure seems like the ratio could be better... just sayin.... our collective MIRROR patch: http://www.camaro5.com/forums/showthread.php?t=24612

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Washing/Detailing for Newbies	MRK III Z28	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	125	02-05-2024 09:55 PM
Flat black paint job	donjr4	Cosmetics and Lighting Modification Discussions	27	07-08-2013 01:59 PM
Bumblebee Paint Job	Tom Henry Racing	Cosmetics and Lighting Modification Discussions	85	11-29-2012 08:39 AM
Crappy paint job	Milk 1027	1st & 2nd Generation Camaros	35	02-07-2010 11:54 AM
How is the paint job?	niko_lanzi	5th Gen Camaro SS LS LT General Discussions	0	05-12-2009 02:54 PM

06-10-2009, 10:20 AM	#43
AMERICANMADE Drives: 2010 Camaro SS Join Date: Jun 2009 Location: Fort Smith, Arkansas Posts: 221	You could make a few bucks to pay for the job if you would have a draftsman detail the exact striping layout with dimensions, or even better, a full size template. Hint, Hint. I'd be willing to drop a few dollars for a set. These stripes are the best I've seen yet. Awesome!

06-10-2009, 10:35 AM	#46
2010 2-Tone Drives: 2010 RY 2SS with Custom Stripes Join Date: Mar 2009 Location: Jennings, La. Posts: 2,220 View My Garage	Looks SSSWWWEEEEEETTT!!!! My is ordered and I have already spoken to my painter. Those are exactly like the ones I am getting.

06-10-2009, 11:55 AM	#47
jcamere94z28 Drives: None Join Date: Dec 2008 Location: Miami, FL Posts: 1,269	that black 1st gen is GORGEOUS...

06-10-2009, 03:28 PM	#49
ClownGames08 Drives: 69 z28/ 69 572/ 2010 BBEE LPE Join Date: Jun 2009 Location: All 3 in Garage Posts: 20	The car next to mine on the left is in to get windows tinted and I think he wants to do the same stripes. I know some of you have asked for stripe dimensions and what not, and Im not sure of them but the owner of the shop DAVID at JONES COLLISION CENTER 559-924-2169 said he would be happy to answer any questions or even do the stripes for you. The number is office number and seceratary is an awesome woman by the name Karen just tell them DC sent you(sounds like a commercial) sorry

06-10-2009, 03:57 PM	#50
Kevin@Lingenfelter Drives: 2010 Camaro SS Join Date: May 2009 Location: Decatur, IN Posts: 30	Great looking car!! : Can't wait to see it in person!

06-10-2009, 04:02 PM	#51
jdurhan Drives: 2017 SS 50th Conv., 2016 Siverado Join Date: Sep 2007 Location: fort lauderdale Posts: 457 View My Garage	Looks really sharp! Love the Black Bowtie.

06-11-2009, 10:25 AM	#53
Embalmer 2G1FT1EWXA9103351 Drives: 2SS RS, SIM, 6pd, 20"Alum Join Date: Oct 2008 Location: Canton, Michigan Posts: 607 View My Garage	Beautiful! But couldn't do the 3k price tag.... ouch!

06-12-2009, 04:52 PM	#54
Buckbo Drives: 2010 Camaro Join Date: Jan 2009 Location: Wilmington,Delaware Posts: 432 View My Garage	I plan to add stripes similar to yours (I hope they turn out as nice). I don't know much about this so I was wondering; Did you make the stripes the same width but spaced them a little further apart than the stock vinyl? Also, I assume you clearcoated on top but did you stop at the edge of the new paint or clearcoat the entire hood and trunk? I was concerned that two layers of clearcoat may slightly change the yellow color?