Aero Turbine Resonators? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SDCamaro10 · 03-04-2010, 11:12 PM

Hey guys had a quick question, didnt really see much about this in any other threads.. I was looking at some Aero Turbine Resonators. Anyone have any experience with these? I put on my magnaflow mufflers, and a magnaflow x-pipe, and im about to throw on JBA shorty's. I saw on the website that the resonators come in 2" and 2.5" so i guess i can kind of scrap that idea. Im not too sure on how the headers will affect the sound of my exhaust, but most of those that have them installed are very pleased with them, and it sounds pretty good on theirs. They also had a different exhaust setup as well.

So anyway, anyone know if these resonators are at all decent, or can recommend a different set?

This site has my exhaust install posted on their blog with pictures, if interested. Theyre located here in San Diego.

http://renegademustangs.wordpress.co...haust-install/

mr_desmo · 03-04-2010, 11:17 PM

theres about 150 useless threads about aeroturbine which is mrt 1 i beleive

Sterling · 03-05-2010, 05:14 AM

Yeah... those are the same as the MRT version 1 exhaust... Nice sound and very loud!

calflan · 03-05-2010, 07:59 AM

I have 2 new Aero Turbines I'd like to sell if you're interested in getting them cheap. I bought them to do the MRT 1.0 mod and changed my mind. Never been used.
calflan@mindspring.com

SDCamaro10 · 03-05-2010, 10:16 AM

Ok, since these are used for the MRT.. can they be used with the magnaflows or would they replace the mufflers? I would figure that since they are resonators, they could be swapped out with the original resonators. Any thoughts?

pleigh · 03-05-2010, 10:32 AM

LOVE my MRT 1.0...

VT2CA · 03-05-2010, 11:33 AM

Quote:

Originally Posted by SDCamaro10

Hey guys had a quick question, didnt really see much about this in any other threads.. I was looking at some Aero Turbine Resonators. Anyone have any experience with these? I put on my magnaflow mufflers, and a magnaflow x-pipe, and im about to throw on JBA shorty's. I saw on the website that the resonators come in 2" and 2.5" so i guess i can kind of scrap that idea. Im not too sure on how the headers will affect the sound of my exhaust, but most of those that have them installed are very pleased with them, and it sounds pretty good on theirs. They also had a different exhaust setup as well.

So anyway, anyone know if these resonators are at all decent, or can recommend a different set?

This site has my exhaust install posted on their blog with pictures, if interested. Theyre located here in San Diego.

http://renegademustangs.wordpress.co...haust-install/

Are you gonna post any vids of your exhaust? Would love to hear it... Did you remove the stock resonators? Did you use the magna xpipe?

SDCamaro10 · 03-05-2010, 12:12 PM

Quote:

Originally Posted by VT2CA

Are you gonna post any vids of your exhaust? Would love to hear it... Did you remove the stock resonators? Did you use the magna xpipe?

Im going to try and get a vid up soon. i left the stock resonators on, and also installed the magnaflow tru x-pipe.

KMPrenger · 03-05-2010, 12:59 PM

I second VT2CA! Would love to see a video.

Did you end up using the Camaro axle-back kit, or a set of custom Magnaflow mufflers?

Thanks!

SDCamaro10 · 03-05-2010, 03:14 PM

Quote:

Originally Posted by KMPrenger

I second VT2CA! Would love to see a video.

Did you end up using the Camaro axle-back kit, or a set of custom Magnaflow mufflers?

Thanks!

Its axle back, however i did a more custom thing. bought mufflers and tips and x-pipe individually and had them installed.

KMPrenger · 03-05-2010, 03:30 PM

Oh, so you just bought the mufflers used in the kit and had them installed? (guessing different tips?) That works!

SDCamaro10 · 03-05-2010, 03:34 PM

Quote:

Originally Posted by KMPrenger

Oh, so you just bought the mufflers used in the kit and had them installed? (guessing different tips?) That works!

I bought the magnaflow 6" rounds and the magnaflow 4" tips, cant recall the part numbers right now. If i remember correctly the kit comes with a different set of mufflers and tips than what I have.

KMPrenger · 03-05-2010, 03:39 PM

Ok...sounds good. Still very much interested in hearing it. Sorry bout all the questions, just wanting to get my stuff straight lol.

SDCamaro10 · 03-05-2010, 03:40 PM

Quote:

Originally Posted by SDCamaro10

I bought the magnaflow 6" rounds and the magnaflow 4" tips, cant recall the part numbers right now. If i remember correctly the kit comes with a different set of mufflers and tips than what I have.

Mufflers : 14615

Tips : 35177

X-pipe : 10790

03-04-2010, 11:12 PM	#1
SDCamaro10 Drives: 2010 Camaro 1LT RJT Join Date: Feb 2010 Location: San Diego, CA Posts: 1,951	Aero Turbine Resonators? Hey guys had a quick question, didnt really see much about this in any other threads.. I was looking at some Aero Turbine Resonators. Anyone have any experience with these? I put on my magnaflow mufflers, and a magnaflow x-pipe, and im about to throw on JBA shorty's. I saw on the website that the resonators come in 2" and 2.5" so i guess i can kind of scrap that idea. Im not too sure on how the headers will affect the sound of my exhaust, but most of those that have them installed are very pleased with them, and it sounds pretty good on theirs. They also had a different exhaust setup as well. So anyway, anyone know if these resonators are at all decent, or can recommend a different set? This site has my exhaust install posted on their blog with pictures, if interested. Theyre located here in San Diego. http://renegademustangs.wordpress.co...haust-install/

03-05-2010, 05:14 AM	#3
Sterling Drives: 2010 Camaro 1LT/RS M6 Join Date: Nov 2007 Location: Fairhaven, MA Posts: 5,885 View My Garage	Yeah... those are the same as the MRT version 1 exhaust... Nice sound and very loud! __________________ Trifecta tune, Vararam Intake, VMAX throttle body and manifold insulator, RxPerformance Catch Can, , MRT v1.0 and Louvers, Barton shifter, BMR strut tower brace, RED dome light and Plasma LED DRL's, fieldgoal00's Halo 1 harness, hood spears/side stripes, rain guards, custom bowtie, Team LLT badges, headlight and foglight covers, taillight and side marker covers, backup light covers, WeatherTech floormats

03-05-2010, 07:59 AM	#4
calflan Drives: 1LT; IBM; 6 Spd Manual Join Date: May 2009 Location: Heath, Tx. Posts: 499	I have 2 new Aero Turbines I'd like to sell if you're interested in getting them cheap. I bought them to do the MRT 1.0 mod and changed my mind. Never been used. calflan@mindspring.com __________________ 1LT; Airaid CAI; Flowmaster American Thunder Axelback; Int Floor Lts; RS Spoiler; Radio Controls; Sequential tail lights; Oil Catch Can; VMAX Throttle Body; MACE plenum spacer; Mace manifold insulator[/I]

03-05-2010, 10:32 AM	#6
pleigh Drives: 2010 CGM 1LT A6 Join Date: Jan 2010 Location: Baton Rouge Posts: 219 View My Garage	LOVE my MRT 1.0... __________________ 1LT A6, 19" polished rims, MRT 1.0 exhaust, Boston Acoustics, C&C package, Tint NO, the Rev limiter is not set to 118MPH... and YES, driving in this manner does affect MPG...

03-05-2010, 12:59 PM	#9
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,943	I second VT2CA! Would love to see a video. Did you end up using the Camaro axle-back kit, or a set of custom Magnaflow mufflers? Thanks! __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

03-04-2010, 11:17 PM	#2
mr_desmo Banned Drives: beated up old mini austin Join Date: Jun 2009 Location: north pole Posts: 440	theres about 150 useless threads about aeroturbine which is mrt 1 i beleive

03-05-2010, 10:16 AM	#5
SDCamaro10 Drives: 2010 Camaro 1LT RJT Join Date: Feb 2010 Location: San Diego, CA Posts: 1,951	Ok, since these are used for the MRT.. can they be used with the magnaflows or would they replace the mufflers? I would figure that since they are resonators, they could be swapped out with the original resonators. Any thoughts?

03-05-2010, 03:30 PM	#11
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,943	Oh, so you just bought the mufflers used in the kit and had them installed? (guessing different tips?) That works! __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

03-05-2010, 03:39 PM	#13
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,943	Ok...sounds good. Still very much interested in hearing it. Sorry bout all the questions, just wanting to get my stuff straight lol. __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Supercharger / Turbocharger Results (INFO) Thread	radz28	Forced Induction - V8	273	08-15-2023 04:44 PM
Factory Air Inlet Resonators	davidj	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	13	05-26-2016 04:39 PM
2010 Camaro 2LT V6 Aero Turbine and Magnaflow Exhaust	suavecito1177	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	47	12-06-2011 08:13 PM
Resonators and your aftermarket XPipe	JoshJ81	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	41	07-30-2009 06:23 AM