f1r pro charger - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BMT CAMERO · 05-23-2012, 08:59 PM

i was told they didnt have bracket for the new camaro?

HufferSS · 05-23-2012, 09:06 PM

Quote:

Originally Posted by BMT CAMERO

i was told they didnt have bracket for the new camaro?

They do but fitting an F1-X into a 2010 requires some fabrication...the strut tower needs to be cut to fit the head unit.

BMT CAMERO · 05-23-2012, 09:12 PM

alsowhat hp was it on just motor?

BMT CAMERO · 05-23-2012, 09:14 PM

Quote:

Originally Posted by HufferSS

They do but fitting an F1-X into a 2010 requires some fabrication...the strut tower needs to be cut to fit the head unit.

dont u need some fabrication even with the f1r?

BMT CAMERO · 05-23-2012, 09:23 PM

Quote:

Originally Posted by HufferSS

They do but fitting an F1-X into a 2010 requires some fabrication...the strut tower needs to be cut to fit the head unit.

dont u need some fabrication even with the f1r?

HufferSS · 05-23-2012, 09:28 PM

Quote:

Originally Posted by BMT CAMERO

dont u need some fabrication even with the f1r?

Not to the body of the car...that I am aware of....they have an F1R kit so it can't be too bad. The F1R head unit is MUCH smaller than the F1-X.

SSMagna · 05-23-2012, 09:36 PM

Quote:

Originally Posted by speedster

We have a good contingent of idiots on this site... lol

It's only a problem when you can't admit it. Right?

jrpxxii · 05-23-2012, 09:38 PM

Quote:

Originally Posted by BMT CAMERO

dont u need some fabrication even with the f1r?

No F1R fits under stock hood with no modifications needed for it to fit.

jrpxxii · 05-23-2012, 09:42 PM

Quote:

Originally Posted by Mike TexaSS

The F-1X makes more power and it's easier to turn than the F2.

Here's a f1r camaro I just finished.

Very nice setup but am wondering why you are only running 15psi and how close are you to maxing out the F1R for rpm with the LSX427? I am asking because I had same setup but there was too much motor for the blower and 18psi was spinning the blower at max rpm.

BMT CAMERO · 05-24-2012, 09:53 PM

Quote:

Originally Posted by jrpxxii

Very nice setup but am wondering why you are only running 15psi and how close are you to maxing out the F1R for rpm with the LSX427? I am asking because I had same setup but there was too much motor for the blower and 18psi was spinning the blower at max rpm.

we did a 440 lsx ,,,,4l80 e and 4 link was 600 hp all motor and now puting a f1r

JM10 · 05-24-2012, 10:36 PM

Camaro from a friend

He wants 800-900rwhp, he told me that on the first pull he got just over 800.
But the car is not ready yet. I will try to post a video next week from his first trip to the track.

jrpxxii · 05-24-2012, 11:06 PM

Quote:

Originally Posted by BMT CAMERO

we did a 440 lsx ,,,,4l80 e and 4 link was 600 hp all motor and now puting a f1r

Absolutely beautiful car. Im actually doing the solid 9" and tubbing it with a 4 link after this season as this is only thing left to do on car.

blake-b · 05-24-2012, 11:30 PM

Hey Jason, what are you going to do with your 9"? I am going to get one this fall and don't mind buying used to save some money. PM me if you wish and don't have arrangements for it already.

BMT CAMERO · 05-25-2012, 10:06 AM

Quote:

Originally Posted by jrpxxii

Absolutely beautiful car. Im actually doing the solid 9" and tubbing it with a 4 link after this season as this is only thing left to do on car.

thanks .....it was alot of work to get it done but it came out great i put 24" x15" wheels for looks for the street and can go about 18" wide

05-24-2012, 10:36 PM	#25
JM10 Se habla español Drives: 2010 Camaro SS/RS VR Join Date: Jun 2009 Location: Arizona/Sonora Posts: 605	427 LSX with F-R Camaro from a friend He wants 800-900rwhp, he told me that on the first pull he got just over 800. But the car is not ready yet. I will try to post a video next week from his first trip to the track. __________________ 2010 VR 2SS/RS BMR Suspension Parts Hendrix HD Axles DSS Aluminum Shaft RPM Diff / 3.91 Gears LPE ZR1 Clutch Edelbrock E-Force SC / JRE Fuel Upgrade Livernois 1C cam 570 rwhp/559 rwtq SAE Best 1/4 time: 11.43 Last edited by JM10; 05-24-2012 at 10:41 PM. Reason: Video

05-23-2012, 08:59 PM	#15
BMT CAMERO Drives: 2010 CAMARO IS BLACK SS2RS #2599 Join Date: Jun 2009 Location: BEAUMONT Posts: 142 View My Garage	i was told they didnt have bracket for the new camaro?

05-23-2012, 09:12 PM	#17
BMT CAMERO Drives: 2010 CAMARO IS BLACK SS2RS #2599 Join Date: Jun 2009 Location: BEAUMONT Posts: 142 View My Garage	alsowhat hp was it on just motor?

05-24-2012, 11:30 PM	#27
blake-b Drives: 2009 ZR1 Join Date: May 2010 Location: KCMO Posts: 3,205	Hey Jason, what are you going to do with your 9"? I am going to get one this fall and don't mind buying used to save some money. PM me if you wish and don't have arrangements for it already.