02-07-2013, 07:29 PM | #1 |
Drives: 2010 2SSRS headers/CAI/tune/corsa, Join Date: May 2010
Location: Commerce twp Michigan
Posts: 1,413
|
Pfadt Camaro Alignment Recommendations
Pfadt Camaro Alignment Recommendations.
Anybody have issues with tires wearing out to fast with the street set up. I was told even the street specs are to aggressive.
__________________
Stainless works headers/cats Roto fab CAI /
Corsa install and tune Livernois TSW Nuburgring 9 &10" x 20 on Invos (315 & 275 ) JL Audio XD400/4 amp Pfadt trailing arms & tie rods sway bars. pedders street 1 package. ,Hurst short throw shifter With bronze bushings . |
02-07-2013, 07:37 PM | #2 | |
Drives: 2011 Camaro SS Join Date: Dec 2012
Location: Bradenton, FL
Posts: 2,610
|
Quote:
I've run these settings on every single one of my client's Gen 5's for street driving. If they were drag minded we would try to take camber out of it and toe 0, maybe even toe in 1/16 on front. Have not seen any ill effects with this setup. |
|
02-07-2013, 08:26 PM | #3 |
ITCRNRS
Drives: 2018 ZL1 1LE Join Date: Jun 2012
Location: Wichita KS
Posts: 1,575
|
We daily drive with -1.4* front and -1.1* rear and haven't had any bad ware yet
What is you current set up
__________________
2018 ZL1 1LE Ordered 6/29/17 Built 11/6/17 Delivered 12/7/17, Summit White, PDR, NAV, https://www.youtube.com/c/tylerpotter
SOLD: 2014 Summit White 1LE 2SS/RS, Recaros, NPP, NAV, KONI Yellow's SOLD: 2012 Black 2LT/RS, Fully 1LE swapped, Brembo swap |
02-07-2013, 09:27 PM | #4 |
Drives: '17 SS 50th Camaro Join Date: Apr 2012
Location: Tampa, Florida
Posts: 921
|
Ooooo, Matt you guys do "aftermarket" alignments? How much do you guys charge, you can pm me
|
02-07-2013, 09:54 PM | #5 |
Account Suspended
Drives: 2010 2SS/RS Join Date: Jun 2009
Location: Texas
Posts: 3,418
|
|
02-07-2013, 11:18 PM | #6 |
instigator
Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010
Location: 72034
Posts: 3,979
|
I have run a couple pfadt allgnments and am running a Pedders one now. Liked the pfadt specs better.
__________________
-John S.
|
02-08-2013, 04:40 AM | #7 | |
Drives: 2010 2SSRS headers/CAI/tune/corsa, Join Date: May 2010
Location: Commerce twp Michigan
Posts: 1,413
|
Quote:
Tires did not hold up. Sounds like something got f....up. Looking for someone to do the install and alignment now. Prices are all over. $900 / $1000 low guy to $1725 dealer. And in between.
__________________
Stainless works headers/cats Roto fab CAI /
Corsa install and tune Livernois TSW Nuburgring 9 &10" x 20 on Invos (315 & 275 ) JL Audio XD400/4 amp Pfadt trailing arms & tie rods sway bars. pedders street 1 package. ,Hurst short throw shifter With bronze bushings . |
|
02-08-2013, 10:07 AM | #8 | |
Drives: 2011 Camaro SS Join Date: Dec 2012
Location: Bradenton, FL
Posts: 2,610
|
Quote:
We work with a good shop down the block from us to put the alignment specifications to our exact specs (As long as the suspension adjustments will allow!). The alignment is $149. If you want us to corner balance for coilovers (Or leafs on the Vettes) that is $350 additional with weights and full color print-outs. I have been doing alignments and corner balancing for many years, just do not have the alignment rack down here (I can do it off manual gauges for track-side, those I have still). |
|
02-08-2013, 11:09 AM | #9 |
Drives: 2010 Camaro, 2006 Z06 Join Date: Feb 2009
Location: SLC, UT
Posts: 3,370
|
|
02-08-2013, 11:12 AM | #10 |
Drives: 2011 Camaro SS Join Date: Dec 2012
Location: Bradenton, FL
Posts: 2,610
|
Yep no problem I can help any of you guys with this.. And if you are a drag guy we have some specifications that Blair and I came up with on my car, that worked great (1.39 60' on the tires I drove to the track on).
|
|
|
|
|