New front and rear tow hook receivers!

[Scotty D]

My question is can you put the front one on with out removing the front bumper ?? By going underneath the car ??

[cornerspeed92]

Originally Posted by Scotty D

My question is can you put the front one on with out removing the front bumper ?? By going underneath the car ??

I wouldn't think so. The reason im chiming here is to let you know, it's super easy to remove the front fascia. Im no mechanic and thought good God i cant remove the fascia. I watched a video, and it's a snap, so believe me if i can do it you can do it.

[toehead93]

I think the entire point of these hooks was to not remove the bumper because the Z/28 bumper is fused to the wheel well extenders.

[Scotty D]

Ok cool

[Skylane765]

Originally Posted by Scotty D

My question is can you put the front one on with out removing the front bumper ?? By going underneath the car ??

All work installing both front and rear DO NOT require the removal of the front or rear bumper facia's
All you do is remove right front tire and wheel well close out. Then you have the sub bumper right in front of you.
Yes front and rear facia can be removed, but there is no need to. If you want to remove it, that's fine, just that why? No mater the way even if removed, you would still install something like we designed. It's just a waist of time removing them, I have done that but found a way to not do it and a strong pull point. Removing the facia would be like removing the engine to change the oil, no need to do it to install the same thing that the car has a opening for.

Here are more pics. http://www.amazon.com/Tow-Hook-Recei.../dp/B00L8IWN0S

[markgws6]

Originally Posted by Skylane765

Front

The 2010-2013 don't have this. You would have to go through the grill or make a hole in the front cover.

[Skylane765]

Yes, for the older cars with out the tow hook door you just remove the facia or drill the hole in the grill and we can provide a grill plug.

We made them for the 2014 and 2015 Z28 and 1LE. But they will all work on the 2010 to 2013 Camaros but there will have to be holes made for them. We can make any custom receivers for any Camaro if anyone wants them.

[Skylane765]

By the way you can use our rear receiver moved to one side if you want to leave installed and keep license plate on.

[ICTsccaCamaro]

Amazon only shows 2 left, how many do you guys have in stock?

[Skylane765]

We have 15 made. We just put 6 a few days ago on Amazon. We do the shipping. You can buy direct from us also. I have not updated the stock on Amazon. It will be on our website www.zl1addons.com when our new web site comes up next week.
If you want direct, just email info@zl1addons.com. We can give you 2 tow hooks if you buy direct from us.

[Balue]

I need some hooks for my 2013 1LE front and rear, its one of the only things that makes me nervous on track days is that what if I need a tow . Was thinking of hiding a strap behind the rear plate and then been trying to come up with a receiver set up for the front. With the 13 not having the door for one its a challenge for a receiver type.

Wanna use mine to prototype?

[Skylane765]

Sure! Come by we will make one for you, if not too much work we will make one no charge. We can make a rear also.

858 527 8727 john

[CrystalRedTintcoat]

Originally Posted by cornerspeed92

I wouldn't think so. The reason im chiming here is to let you know, it's super easy to remove the front fascia. Im no mechanic and thought good God i cant remove the fascia. I watched a video, and it's a snap, so believe me if i can do it you can do it.

+1. Very easy but watch the video first and remove the wheels. I've done it at least 6 times.

[Balue]

Originally Posted by Skylane765

Sure! Come by we will make one for you, if not too much work we will make one no charge. We can make a rear also.

858 527 8727 john

Thanks John, sounds good! Where are you located at? I work M-F but am usually off by about 3pm. I will contact you this week.

Thanks!!!