06-22-2011, 01:57 PM | #1 |
Drives: 2011 Chevrolet Camaro 2LT in Black Join Date: Feb 2011
Location: Bay Area, CA
Posts: 32
|
Bay Area Oil Change
Any advice on where should I get my oil change. I live in the Bay Area, CA. Thanks...
|
06-22-2011, 02:43 PM | #2 |
C5 THAKILYETI
Drives: 2LTRS Join Date: Aug 2010
Location: Bay Area, CA
Posts: 367
|
if you HAVE to go to an "oil changers" or "jiffy lube," go on a weekday, early in the week (mon, tue or wed) and go when they open, you will probably be the only customer there, less likely that they will screw something up...
you really ought to buy some ramps from autozone and DIY, that way you won't have to worry about it being done right. |
06-22-2011, 03:10 PM | #3 |
Drives: '86 Monte Carlo SS Join Date: Nov 2010
Location: Reno, NV
Posts: 3,119
|
+1 on DIY. Save money, know it was done right and you get to bond with your new Camaro. Part of Camaro ownership means you should have basic mechanical ability and knowledge to care for it.
Jiffy Lube and similar rip off "drain and fill" places employ 18 yr old techs who don't know jack shyt. |
06-22-2011, 11:45 PM | #4 |
NorCalCamaros.com
|
I would never let a jiffy lube or oil can Henry's touch my car...
|
06-22-2011, 11:47 PM | #5 |
Lead Footed
|
It's cheaper to do it your self. I go to wallmart for all my supplies. I went to the stealership once to buy an oil filter and they wanted 12 bucks, the same AC Delco filter is 4.99 at wallmarts.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Camaro Oil Change | adub4185 | Camaro DIY & HOW-TO instructions & discussions | 180 | 04-23-2014 06:11 PM |
best synthetic oil to use | hollywoodjose | Mechanical Maintenance: Break-in / Oil & Fluids / Servicing | 130 | 01-26-2014 08:51 AM |
1st oil change question | rado06 | Mechanical Maintenance: Break-in / Oil & Fluids / Servicing | 10 | 09-19-2010 08:10 PM |
Can we use the catchcan made for the G8? | HaZe_X | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 16 | 05-05-2010 10:35 AM |
Major U.S. oil source is tapped | KILLER74Z28 | Off-topic Discussions | 32 | 10-30-2007 09:47 AM |