Post Details on your Drag Wheel setup - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

LS1 Fun · 07-07-2014, 12:34 PM

I would like to see what wheels everyone is currently running on their ZL1 for Drag Racing. I am mainly concerned with the rears, but feel free to post the whole setup if you have it. Drag racers only please! If you have pics, throw those up too!

Wheel Make/Model
Wheel Size
Back Space/Offset
Tire Make/Model
Tire Size
ET/MPH
Any other applicable notes

Thanks!

2013 ZL1 #7860 · 07-07-2014, 06:20 PM

Stock ZL1 black rears (extra set that is swapped at the track), Mickey Thompson 305/35/20 ET Street 2's DOT, perfect fit, look great and dropped my 60 foot without a burnout by 3 tenths, with a good burnout and 20 psi they drop the 60 foot by 4 tenths. Still only getting a 1.9 60 foot tho on an auto. Would love it if Mickey Thompson made the tire in 315 or 325 width!

CanadianZL1#992 · 07-07-2014, 07:40 PM

I have two set ups depending on race gas or pump gas..

Race gas- Hoosier 28X10R17 slicks on bogart rears ( tried running stock fronts but have a hard time controlling the car ) Hoosier 27.5X4.5R17 skinnies on bogart fronts
Pump gas- M/T 305/35R20 DR's on stock rear rims. Stock fronts

2013 ZL1 #7860 · 07-07-2014, 09:48 PM

Quote:

Originally Posted by CanadianZL1#992

I have two set ups depending on race gas or pump gas..

Race gas- Hoosier 28X10R17 slicks on bogart rears ( tried running stock fronts but have a hard time controlling the car ) Hoosier 27.5X4.5R17 skinnies on bogart fronts
Pump gas- M/T 305/35R20 DR's on stock rear rims. Stock fronts

How are you launching on the Mickey thompsons? Tire pressure and burnout length? 60 foot times? Thanks! Wish I could afford 2 drag set ups!!!

Mikes fast ss · 07-07-2014, 09:52 PM

Quote:

Originally Posted by 2013 ZL1 #7860

How are you launching on the Mickey thompsons? Tire pressure and burnout length? 60 foot times? Thanks! Wish I could afford 2 drag set ups!!!

18 psi before burnout
Only burnout until it wisps
Hustle to the line

Cuts 1.3's 60' I'm on a 325/50 ET street.

cdjnight · 07-07-2014, 10:27 PM

All mine is here http://www.camaro5.com/forums/showthread.php?t=356512

2013 ZL1 #7860 · 07-07-2014, 10:30 PM

Quote:

Originally Posted by Mikes fast ss

18 psi before burnout
Only burnout until it wisps
Hustle to the line

Cuts 1.3's 60' I'm on a 325/50 ET street.

Nice! Rim size?

Mikes fast ss · 07-07-2014, 10:32 PM

Quote:

Originally Posted by 2013 ZL1 #7860

Nice! Rim size?

15". Sorry. I thought I put that on the tire size. Off the brake and leaving in full boost should high 1.2's. But we know how "should be" goes. Lol

The 1.3's were leaving off the foot brake at 2k rpm.

CanadianZL1#992 · 07-08-2014, 06:22 AM

Quote:

Originally Posted by 2013 ZL1 #7860

How are you launching on the Mickey thompsons? Tire pressure and burnout length? 60 foot times? Thanks! Wish I could afford 2 drag set ups!!!

Tire pressure 18 psi, 2nd gear burnout for about 3 sec. Usually see good cloud of smoke. Mid 1.7 60ft. My car is a manual. I do the same with the slicks and usually get high 1.5's or low 1.6's

2013 ZL1 #7860 · 07-08-2014, 07:22 PM

Quote:

Originally Posted by CanadianZL1#992

Tire pressure 18 psi, 2nd gear burnout for about 3 sec. Usually see good cloud of smoke. Mid 1.7 60ft. My car is a manual. I do the same with the slicks and usually get high 1.5's or low 1.6's

Thanks for the info, best yet on mine is a 1.9 flat in my auto. I have work to do to get a 1.7!

LS1 Fun · 12-16-2014, 12:01 PM

bump, would like to see more setups posted!

revobasher · 04-05-2015, 10:35 PM

Another bump. Looking to get a drag setup soon

07-07-2014, 12:34 PM	#1
LS1 Fun Drives: 2013 ZL1 Join Date: Nov 2012 Location: CA, USA Posts: 128	Post Details on your Drag Wheel setup I would like to see what wheels everyone is currently running on their ZL1 for Drag Racing. I am mainly concerned with the rears, but feel free to post the whole setup if you have it. Drag racers only please! If you have pics, throw those up too! Wheel Make/Model Wheel Size Back Space/Offset Tire Make/Model Tire Size ET/MPH Any other applicable notes Thanks! __________________ 1974 Cadillac Coupe DeVille 2002 Camaro Z28 A4 \| 10.80 @ 131 \| 383ci, D1SC, 4L80E, 9" 2013 Camaro ZL1 A6 \| 12.62 @ 113 \| Stock SOLD 2017 Lexus GS350F*

07-07-2014, 07:40 PM	#3
CanadianZL1#992 ANGRY Z Drives: 2015 Camaro ZL1 Join Date: May 2012 Location: Alberta, Canada Posts: 1,406	I have two set ups depending on race gas or pump gas.. Race gas- Hoosier 28X10R17 slicks on bogart rears ( tried running stock fronts but have a hard time controlling the car ) Hoosier 27.5X4.5R17 skinnies on bogart fronts Pump gas- M/T 305/35R20 DR's on stock rear rims. Stock fronts __________________ 2015 ZL1 A6 396 stroker RWHP- depends on nitrous

07-07-2014, 10:27 PM	#6
cdjnight Drives: 2013 ZL1 A6 Join Date: Nov 2013 Location: Council Bluffs, Iowa Posts: 266	All mine is here http://www.camaro5.com/forums/showthread.php?t=356512 __________________

12-16-2014, 12:01 PM	#11
LS1 Fun Drives: 2013 ZL1 Join Date: Nov 2012 Location: CA, USA Posts: 128	bump, would like to see more setups posted! __________________ 1974 Cadillac Coupe DeVille 2002 Camaro Z28 A4 \| 10.80 @ 131 \| 383ci, D1SC, 4L80E, 9" 2013 Camaro ZL1 A6 \| 12.62 @ 113 \| Stock SOLD 2017 Lexus GS350F*

04-05-2015, 10:35 PM	#12
revobasher Drives: 2013 ZL1 Join Date: Oct 2014 Location: Blaine, MN Posts: 552	Another bump. Looking to get a drag setup soon __________________ -- 2013 ZL1 - Blue Ray Metallic JDP 850 Package 740hp/700tq @14lbs on E85 Build Thread

07-07-2014, 06:20 PM	#2
2013 ZL1 #7860 Drives: 2013 ZL1 A6 #7860 Join Date: Apr 2014 Location: CO, USA Posts: 1,279	Stock ZL1 black rears (extra set that is swapped at the track), Mickey Thompson 305/35/20 ET Street 2's DOT, perfect fit, look great and dropped my 60 foot without a burnout by 3 tenths, with a good burnout and 20 psi they drop the 60 foot by 4 tenths. Still only getting a 1.9 60 foot tho on an auto. Would love it if Mickey Thompson made the tire in 315 or 325 width!