11-10-2013, 06:59 PM | #1 |
Just bought 12 ZL1 looking to get 650 Rwhp HELP!!
I just bought a 12 ZL1 and I need opinions on the best and most reliable way to get 650 Rwhp. My car is bone stock!! My budget is 2500.any suggestions??
|
|
11-10-2013, 07:24 PM | #2 |
Drives: 2012 ZL1 125HP kit , EIBACH springs Join Date: Jul 2012
Location: Central MA
Posts: 180
|
Good luck with that. The budget is small for that kind of RWHP. 100 extra RWHP will run just over 3K.
|
11-10-2013, 08:00 PM | #3 |
Drives: 2016 Corvette Z06 M6 Join Date: May 2009
Location: Odenton, MD
Posts: 874
|
You'll have to wait it out for some used parts (headers, injectors, CAI) on that budget
__________________
2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank
20/21 BC Forged Wheels : BC Coilovers: TA Aero |
11-10-2013, 08:25 PM | #4 |
Speed Freak
Drives: 2013 ZL1 Camaro, 2016 Camaro SS Join Date: Jun 2013
Location: Ardmore, OK
Posts: 2,637
|
Where is Asheville? Location might make a difference.
__________________
2016 SS -AGP twin Borg Warner 7163 EFR's, LT4 mechanical pump, LT4 injectors, Walbro 255 low side, Castrol SRF. 734whp/759 tq
2013 ZL1 -ADM - 427 LSX 6 bolt, O-ringed block built by LME. Twin PT6466 turbos. RPM custom manual trans, RPS Quad carbon clutch, 9" Hendrix rear diff & axles. ADM/squash fuel system, Ron Davis radiator, Spal fans, AGP air to air, turbo plumbing. LPE oil cooler, rear bushing upgrade, roll bar...etc. rwhp 1400+... 212.5mph, best Texas mile to date. |
11-10-2013, 08:45 PM | #5 |
What kind of power increase should I expect from these upgrades. Roto fab cai, headers,and blower pulley (18%)?
|
|
11-10-2013, 08:50 PM | #6 |
Drives: 2012 ZL1 Join Date: Dec 2011
Location: pittsburgh area
Posts: 1,426
|
you will need injectors with those mods also. Guessing 100-125rwhp.
__________________
2012 CTF ZL1-stock
2012 ZL1 (sold) JRE 75rwhp kit catless ported lsa TB 11.04 @ 128.35 on hoosier drs and skinnies @ PRP with 1100DA |
11-10-2013, 09:00 PM | #7 |
So with those mods maybe 600-625 rwhp?
|
|
11-10-2013, 09:17 PM | #8 |
Drives: 2015 Blue Velvet Metallic ZL1 Join Date: Nov 2013
Location: Orlando & Flagler Beach,FL
Posts: 1,453
|
|
11-10-2013, 09:29 PM | #9 |
I Carry!
Drives: 2013 CRT ZL1 Join Date: Jul 2011
Location: Fletcher, Ok
Posts: 2,722
|
JRE 75-150 RWHP....
__________________
I am a Modaholic!! Please Help!! Do Not feed my addicition....See build...
http://www.camaro5.com/forums/showthread.php?t=261540 From Oklahoma, Join us on Facebook https://www.facebook.com/groups/okcamaros/ |
11-10-2013, 10:15 PM | #10 |
Drives: 2013 ZL1 Join Date: Oct 2011
Location: tangent or
Posts: 2,984
|
my .02
cai $400 Lower pulley 9.55 $600 ID850's $800 tune $400 i would do longtubes and tb as well but you 2500 budget is a bit light. that will get you in the ballpark. HP goals are kind of wierd. a 625hp car will spank a 650 HP car that is setup better. IE cooling mods, better tire etc.
__________________
shopping for 2017+1le or zl1
2009 CTS-V -sold 2015 Hellcat-sold 2013 ZL1 -sold 2007 Z06- sold 2014 Chrysler 300 2011 Duramax 8" lift, deleted tuned Last edited by hognutz; 11-11-2013 at 12:07 PM. |
11-11-2013, 02:01 AM | #11 |
Drives: 13 ZL1 vert blac fastlane/LPE 750 Join Date: Jul 2011
Location: houston
Posts: 1,312
|
you wont be able to get those kind of numbers with onlt 2500 bucks,sorry plus if you wanting to keep the IAT down you really need to get a bigger heat exchanger,and that alone for a good one is 700 to 999,,without paying to install it if you cant do it yourself
__________________
http://www.camaro5.com/forums/showthread.php?t=346589 CHECK OUT THE BUILDING OF MY RANCH FOR DISABLED VETS, COMPLETE WITH A GUN RANGE .
|
11-11-2013, 03:24 AM | #12 |
Ragtop Rocket!!!
Drives: Black on Black Convertible Join Date: Mar 2013
Location: San Antonio Texas
Posts: 809
|
Get a loan.
__________________
ADM built 2013 Triple Black ZL-1 Convertible M6
ADM custom cam, LPE stage 2 heads with dual valve springs, LS-3 ported throttle body, LPE 2 piece pulley, LPE overdrive balancer, 10% overdrive pulley, ported supercharger inlet, ADM race intake system, stainless works 1-7/8 headers, Injector Dynamics injectors, ADM heat exchanger, ADM dual fuel pump system, ADM exhaust switch, ADM 3 tunes tuning package. 744rwhp 727rwtq |
11-11-2013, 07:07 AM | #13 |
Drives: Camaro ZL1 Join Date: May 2012
Location: Houston
Posts: 233
|
If you have an AUTO (not manual), and you are not doing the install work yourself, expect to spend around 10k for 650 to the wheels reliably. You could get there for less, but prob not consistent or reliable.
__________________
2012 A6 Coupe 630RWHP 10.93@125
Mods: ID850 Injectors; D3PE HX, Reservoir & Atmospheric Catch-Can; LPE 2.55 Upper & 9.1 Lower Pulleys w/ ATI Damper; LPE Idler Pulley Relocation Bracket; "Green" Serp. Belt; Cat delete;ADM Exhaust Override; Magnaflow X-Pipe Muffler (in addition to stock mufflers); Cold Air Inductions CAI; 160 thermostat; LS9 Isolator; Port/polish snout and intake runners; LPE GT9 camshaft with dual springs and titanium retainers; Kenne Bell BAP, Install and Engine Tune by Serious Hp; Fab work by D3 Performance Engineering; Trans Tune by Keith; Coming Soon: Flex Fuel Conversion. |
11-11-2013, 09:21 AM | #14 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,809
|
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
|
|
|
|