04-29-2018, 09:12 PM | #1 |
Drives: [COTW 8/3/15] 2010 Camaro SS L99 Join Date: Mar 2015
Location: Mooresville NC
Posts: 434
|
Updated 2010 Camaro SS Performance and Looks!
I’ve owned my Camaro SS going on 4 years, only has 25000 miles on the clock. All the work on the vehicle has been done by me, with the exception being the tune which has been done by Cunningham Motorsports out of Temecula. Recent changes include:
1. ZL1 Dash with HUD 2. PAC audio conversion with Kenwwod 3. Additional Carbon Flash painted interior pieces 4. Alky Control with single nozzle / trunk mount tank 5. Fabbed up new intake 6. Long Tube Stainless Headers 7. FIC 1000 Injectors 8. ADM / ZL1 Pump upgrade 9. Z28 Staggered Wheels 10. MT Drag Radials 305/275 Took my time over a month for all the new additions. Everything was fairly easy work with the wiring driving me nuts, but finally have everything up and running. Some Pics:
__________________
A Little bit of power. ALL WORK DONE BY ME!
Just added 2021 ZL1 1LE to the Stable! https://www.camaro5.com/forums/showthread.php?t=418273 Last edited by 43Camaro; 04-29-2018 at 09:23 PM. |
04-30-2018, 12:00 AM | #2 |
Gray Eagle
Drives: 2010 Camaro 2SS/RS IBM, 1994 Camaro Join Date: Dec 2009
Location: Sierra Vista, AZ
Posts: 331
|
It looks really good!
Where did you get that shifter? I have been looking for one of them.
__________________
Ordered - 14 Aug 2009 Born - 4 Nov 2009 Delivered - 17 Dec 2009 |
04-30-2018, 04:21 AM | #3 |
Nice work
|
|
04-30-2018, 05:43 AM | #4 |
Drives: 2012 ZL1 Redline Phase 4 Join Date: May 2017
Location: Selden, NY
Posts: 202
|
Me Likey
__________________
2012 ZL1 w/Redline PHASE 4-ZL Performance Package
|
04-30-2018, 07:42 AM | #5 |
Drives: [COTW 8/3/15] 2010 Camaro SS L99 Join Date: Mar 2015
Location: Mooresville NC
Posts: 434
|
I believe it must have been discontinued since they don't have it on the website anymore. It's still one of my favorite pieces. You might find one on ebay..
__________________
A Little bit of power. ALL WORK DONE BY ME!
Just added 2021 ZL1 1LE to the Stable! https://www.camaro5.com/forums/showthread.php?t=418273 |
04-30-2018, 07:45 AM | #6 |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
Spike III Build 2011 IBM 1SS/RS [COTW 6/25/12]
Same one with the original COPO Drake shifter.
__________________
|
04-30-2018, 08:58 AM | #7 |
Drives: [COTW 8/3/15] 2010 Camaro SS L99 Join Date: Mar 2015
Location: Mooresville NC
Posts: 434
|
I really like the COPO Drake shifter with the Carbon Fiber. Great Look
__________________
A Little bit of power. ALL WORK DONE BY ME!
Just added 2021 ZL1 1LE to the Stable! https://www.camaro5.com/forums/showthread.php?t=418273 |
04-30-2018, 09:02 AM | #8 |
Space Shuttle Aficionado
|
Do I see a boost gauge in one of the A/C ducts?
__________________
|
04-30-2018, 09:17 AM | #9 |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
Thxs. I tried 3 different shifters handles but like this one the best.
__________________
|
04-30-2018, 09:25 AM | #10 |
Instagram: Sangstah
|
The interior looks great, awesome work!
__________________
2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold
Follow the build https://www.camaro6.com/forums/showthread.php?t=612717 |
04-30-2018, 09:32 AM | #11 |
Drives: 2013 SS 1LE Join Date: Nov 2011
Location: Cincinnati / N KY area
Posts: 559
|
Good job..lotta time involved w that !!!!
|
04-30-2018, 09:52 AM | #12 |
Drives: [COTW 8/3/15] 2010 Camaro SS L99 Join Date: Mar 2015
Location: Mooresville NC
Posts: 434
|
Air Fuel Gauge. Very easy install used some black foam for the rigidity in the vent and cut the hole in the foam and mounted the gauge. Looks custom with very little fabrication work. Easy to remove and put the vent back in if I choose.
__________________
A Little bit of power. ALL WORK DONE BY ME!
Just added 2021 ZL1 1LE to the Stable! https://www.camaro5.com/forums/showthread.php?t=418273 |
04-30-2018, 10:17 AM | #13 |
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,228
|
Looks Clean and simple. I like it. I've been looking for that Hurst shifter plate too.
__________________
STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
04-30-2018, 10:37 AM | #14 |
Instagram: Mr2Hard2See
Drives: 2011 2SS/ RS Join Date: Apr 2018
Location: SF Bay Area
Posts: 691
|
That came out badass. What part of Cali you from?
|
|
|
|
|