NEW! P13W High Powered Plasma LED Bulbs for RS Camaro! Now in Stock!

[AACstyle]

These 4W High Powered LED Bulbs Feature an Aluminum Heat Sink Housing instead of the Traditional PCB. Aluminum has better Heat Dissipation Properties and much Higher Durability when compared to PCB.

SALE! for a limited time just $99 for Camaro5 Members! Order Here: http://www.automotivelightstore.com/p13w_SALE.aspx

The Plasma Type LEDs have an increased Surface Area for Output that can not be matched by other LED Bulbs!

One thing you will immediately notice is that the plug is detached from the actual bulb, this is because we put a voltage regulator in that cavity to prevent any damage from voltage spikes or other electrical issues.




Main Benefits:
- 2x Brighter Output
- Better Heat Dissipation
- Higher Luminous Flux
- Longer Life LEDs
- Aluminum Housing
- Built-In Regulator
- New Aesthetically Pleasing Design






Just $99 for forum members!

Here is the link: http://www.automotivelightstore.com/p13w_SALE.aspx


UPDATE!

Now members get upgraded to 6W bulbs at NO ADDITIONAL CHARGE

Originally Posted by AACstyle

We have been testing the 6W prototype for a few days now.

Figured I would post up some photos so you guys can see how these look

[2010IBMSS]

Will these have the same problem as the first P13W's?

Are they in stock???

[AACstyle]

Originally Posted by 2010IBMSS

Will these have the same problem as the first P13W's?

Are they in stock???

No, they have a built-in regulator.

Yes, they are in stock.

[2010IBMSS]

I'm gonna get a set...thanks Justin!!!

[AACstyle]

Originally Posted by 2010IBMSS

I'm gonna get a set...thanks Justin!!!

Your Welcome

[mattbaer]

Did ya'll figure out the upgrade fee?

[tonyfred]

I want to know about an upgrade fee also. I have an unopened set of the other P13s.

[TK]

Dont you mean "FOR RS CAMAROS" not "NON-RS"... I thought the P13W was the RS's DRLs.

Also curious about some 'upgrade fee'.. I've alrdy purchased the original ones, luckily I haven't had them burn out yet,

Granted I only have 9.7k miles on the car and installed them around 4k.

[AACstyle]

Originally Posted by mattbaer

Did ya'll figure out the upgrade fee?

Originally Posted by tonyfred

I want to know about an upgrade fee also. I have an unopened set of the other P13s.

Sorry, posted on the other thread but not here.

Here you go:

Originally Posted by Jonathan@AACstyle.com

The exchange will be trade +$40. When you send your P13W bulbs back to us please include this form: http://www.automotivelightstore.com/...EQUESTFORM.pdf and make a note on the bottom of the form that you are wanting to upgrade to the Plasma P13W bulbs. Please leave a contact phone number so we can call to get your credit card information or if you would rather attach a check please make it payable to AAC Enterprises.

Originally Posted by TK

Dont you mean "FOR RS CAMAROS" not "NON-RS"... I thought the P13W was the RS's DRLs.

Thanks, fixed!

[Hutch52]

What is the warranty on the new Pl3W plasma bulbs for 2011 RS camero?
Is that 99.00 and free shipping?

[slick rick]

Any pictures with the bulbs installed and running (lit up)?

[khislop007]

Originally Posted by slick rick

Any pictures with the bulbs installed and running (lit up)?

i'll get a set when i see them and hear some feed back

[spurscar]

Anxious for some real life photos too and how these compare to the halos and hids.

[2010IBMSS]

ordered a set, I will take pics when I get them...

[Alain]

Originally Posted by AACstyle

Sorry, posted on the other thread but not here.

Here you go:





Thanks, fixed!

who is eligible for this upgrade. i bought the p13 that keep flickering. do i qualify. please say yes!!!! lolol

[Mindz]

I'll post pictures up tonight if I get time, or tomorrow at the latest. I put on a set of these before heading to SEMA and they work like a charm. No problems yet. More info to come!

[Jonathan@AACstyle.com]

Originally Posted by Alain

who is eligible for this upgrade. i bought the p13 that keep flickering. do i qualify. please say yes!!!! lolol

YES! Anyone that would like to upgrade the bulbs can upgrade to the "new style" bulbs.

Originally Posted by Mindz

I'll post pictures up tonight if I get time, or tomorrow at the latest. I put on a set of these before heading to SEMA and they work like a charm. No problems yet. More info to come!

Thanks Mindz!

I am trying to get a few other Beta testers to leave some feedback and pictures on this thread!

[Jonathan@AACstyle.com]

Feedback emailed to me:

Hey Jonathan,

I wanted to give you an update on the lights. The new fog lights are awesome! From the moment I got them I had a good feeling. You have provided great customer service, more than Enough, especially with these bulbs, letting me borrow the hex screw drivers, and just being very nice. Represents the company very well. A far as the bulbs, installation was plug and play. Very easy. I went ahead and taped the hanging wire from the bulb up onto the bumper just because I didn't want it to hang freely. The bulbs themselves work alot better than their previous model. The aluminum body is very sturdy and stable. The LEDs are very bright and powerful. They provide excellent brightness over the older ones. With the new bulbs I can see their reflection in bumpers of other cars, even during the day! They even have a little distance to them. About 2-3 feet from the car. The old ones did not. They have not flickered once or burned out. The new adapter or power capacitor is working well. I have been running them in auto mode and they are top notch. Job well done!

[Alain]

[QUOTE=Jonathan@AACstyle.com;2645196]YES! Anyone that would like to upgrade the bulbs can upgrade to the "new style" bulbs.


sweeeeeeet !!!

[Caseindaplace]

Hey Guys,

I have been running these bulbs and they are flawless. Unlike the previous bulbs, these do not burn out or flicker as you may know the other ones did. They illuminate very far out from the car and are very bright, even during the day. Day and night you can see them in the bumper or tailgate of cars in front of you. I have the T tap wire installed to run halos and fog lights as well as headlights and fog lights.

Order a pair, they bring a custom look that no one else around town will have.

Here are the pics.

[Caseindaplace]

some more

[CamaroNewb]

Outstanding. Just ordered a pair. Thanks!!!

[fieldgoal00]

Hey guys, I've been running these bulbs for about two months now. We actually removed my harness in my car to make sure the PWM signal was being fed into the bulbs and they still continue to work flawlessly. The LED driver built into the base of the bulbs is basically a regulator and what it does is regardless of what is sent to the bulb a constant voltage is applied to the LED bulbs. I will post pics as soon as I can, I will be out of town this weekend but as soon as I get back I will post pics.

[tonyfred]

Originally Posted by fieldgoal00

Hey guys, I've been running these bulbs for about two months now. We actually removed my harness in my car to make sure the PWM signal was being fed into the bulbs and they still continue to work flawlessly. The LED driver built into the base of the bulbs is basically a regulator and what it does is regardless of what is sent to the bulb a constant voltage is applied to the LED bulbs. I will post pics as soon as I can, I will be out of town this weekend but as soon as I get back I will post pics.

Why would you need these? We were told repeatedly by you and AAC that your harness would solve the problem with the original P13W bulbs. Just curious.

[fieldgoal00]

Originally Posted by tonyfred

Why would you need these? We were told repeatedly by you and AAC that your harness would solve the problem with the original P13W bulbs. Just curious.

I told you that my harness removed the PWM signal, and it does. I thought that was the leading issue with the bulbs. Actually I have the original prototype harness on my car with no second relay so the PWM signal still goes to my P13W leds and I had them on the car since Camaro5 fest and no LED's ever went out. Now I've had the new plasma leds on my car for about 2 months and no problems with them either. Go Figure