Finally a REAL HEADER 50 state Legal from American Racing - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JANNETTYRACING · 12-03-2011, 08:50 AM

I knew about this Last Week but was asked not to mention it until PRI.

American Racing Releases a Real Header with near equal length primaries that is 50 state legal, Pending E.O. number

http://www.chevyhardcore.com/feature...amaro-shorties

Ted.

20camaro12 · 12-03-2011, 10:42 AM

I'd be interested if they actually get approved. Seems to me that most get to this part but then get stuck in the pending eo/carb state. Thanks for the information too, any idea how much they might cost or how big the pipes are?

JANNETTYRACING · 12-03-2011, 10:44 AM

Quote:

Originally Posted by 20camaro12

I'd be interested if they actually get approved. Seems to me that most get to this part but then get stuck in the pending eo/carb state. Thanks for the information too, any idea how much they might cost or how big the pipes are?

They Appear to be 1 7/8 but not sure.

monstertodd · 12-03-2011, 10:47 AM

This is pretty cool, even if they are just shorties. Hopefully they will offer some measure of added performance. If so, I'm in.

JANNETTYRACING · 12-03-2011, 11:12 AM

Quote:

Originally Posted by monstertodd

This is pretty cool, even if they are just shorties. Hopefully they will offer some measure of added performance. If so, I'm in.

If you look at all other Shorties they have 1 very short tube and progressively get longer toward the front of the engine.

As you can see with these that is not the case all the tube are as close to the same length and have some length to work with for Power Production.

They have shown Promising Numbers according to Nick, we will be testing them ASAP.

Ted.

S3XPanther · 12-03-2011, 11:15 AM

This is pretty awesome for the gear heads in Cali. It just goes to show how dedicated ARH is to making EVERYONE happy. They're ok in my book.

Fishdadddy · 12-03-2011, 11:21 AM

Padre · 12-03-2011, 11:21 AM

OMG!!! SHORTIES!!! EVERYONE KNOWS SHORTIES SUCK!!! NO POWER!!! SHOW-ONLY!!! SOUND-ONLY!!! GET LTS!!! BLAH BLAH BLAH...

Padre

mgoodbar · 12-03-2011, 01:57 PM

rotf-lmao

SRT10KLLR · 12-03-2011, 02:04 PM

So these would be like the BBK equal-length shorty headers I had on my fox body?

Rhino79 · 12-03-2011, 06:30 PM

Quote:

Originally Posted by Padre

OMG!!! SHORTIES!!! EVERYONE KNOWS SHORTIES SUCK!!! NO POWER!!! SHOW-ONLY!!! SOUND-ONLY!!! GET LTS!!! BLAH BLAH BLAH...

Padre

What have they done to this set to improve scavenging?

Padre · 12-03-2011, 06:42 PM

Quote:

Originally Posted by Rhino79

What have they done to this set to improve scavenging?

What Ted said:

Quote:

Originally Posted by JANNETTYRACING

If you look at all other Shorties they have 1 very short tube and progressively get longer toward the front of the engine.

As you can see with these that is not the case all the tube are as close to the same length and have some length to work with for Power Production.

They have shown Promising Numbers according to Nick, we will be testing them ASAP.

Padre

Rhino79 · 12-03-2011, 06:58 PM

Exactly...lol They made the tubes longer.

From The Future · 12-03-2011, 07:50 PM

Ted, when are these going to be available? This looks like just the thing to go with the JBA high flow catted midpipes I just ordered from you.

I had been considering the JBA shorty headers to go with them but these look better. Will they be available coated?
Mike

12-03-2011, 08:50 AM	#1
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,410	Finally a REAL HEADER 50 state Legal from American Racing I knew about this Last Week but was asked not to mention it until PRI. American Racing Releases a Real Header with near equal length primaries that is 50 state legal, Pending E.O. number http://www.chevyhardcore.com/feature...amaro-shorties Ted. __________________ www.jannettyracing.com Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

12-03-2011, 11:15 AM	#6
S3XPanther by Odeon Drives: '12 SS/RS A6 IOM SOLD, '13 1LE IOM Join Date: Nov 2011 Location: Good question Posts: 1,707	This is pretty awesome for the gear heads in Cali. It just goes to show how dedicated ARH is to making EVERYONE happy. They're ok in my book. __________________ "It works 60% of the time, every time." "Some say it's a waste of time, others say it's an incredible waste of time." "The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands at times of challenge and controversy." 2013 IOM SS/RS - 1LE. Born 5/6/2013 (1 of 32 1SS IOM 1LE's)

12-03-2011, 11:21 AM	#8
Padre Only drives on Sundays Drives: '16 2SS A8 NPP MRC NGray Join Date: Feb 2011 Location: Dalton, GA Posts: 2,500 View My Garage	OMG!!! SHORTIES!!! EVERYONE KNOWS SHORTIES SUCK!!! NO POWER!!! SHOW-ONLY!!! SOUND-ONLY!!! GET LTS!!! BLAH BLAH BLAH... Padre __________________ OLD HOTNESS: The "Heretic": '11 2SS/RS L99 A6 Black/Inferno. Build Journal, Videos D1SC GT9 JBA-LT = 720/680 \| 10.330 @ 133.61, 1.546 sixty... Camaro King at ECS V, Darlington. NEW HOTNESS: '16 2SS A8 NPP MRC. Bone Stock, 1/8th: 8.051 @ 89.44, 1.919

12-03-2011, 02:04 PM	#10
SRT10KLLR Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009 Location: Down South Posts: 1,497	So these would be like the BBK equal-length shorty headers I had on my fox body? __________________ 2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo 2004 Dodge Ram SRT-10 - Silver - Stock 2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo

12-03-2011, 07:50 PM	#14
From The Future needs gas money Drives: 2010 Camaro SS IOM 6M Join Date: Jun 2011 Location: Franklin TN Posts: 41 View My Garage	how soon? Ted, when are these going to be available? This looks like just the thing to go with the JBA high flow catted midpipes I just ordered from you. I had been considering the JBA shorty headers to go with them but these look better. Will they be available coated? Mike

12-03-2011, 10:42 AM	#2
20camaro12 Drives: 2012 45th anniv. Convertible SS LS3 Join Date: Oct 2011 Location: Riverside, CA Posts: 321 View My Garage	I'd be interested if they actually get approved. Seems to me that most get to this part but then get stuck in the pending eo/carb state. Thanks for the information too, any idea how much they might cost or how big the pipes are?

12-03-2011, 10:47 AM	#4
monstertodd Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009 Location: Tega Cay, South Carolina Posts: 4,032 View My Garage	This is pretty cool, even if they are just shorties. Hopefully they will offer some measure of added performance. If so, I'm in.

12-03-2011, 11:21 AM	#7
Fishdadddy Drives: 2010 2SS/RS ; 1970 Firebird Formula Join Date: Jan 2010 Location: West Palm Beach Posts: 1,252 View My Garage

12-03-2011, 01:57 PM	#9
mgoodbar White 2ss, LT, CAI, Tune Drives: 2010 L99 Join Date: May 2011 Location: memphis Posts: 651	rotf-lmao

12-03-2011, 06:58 PM	#13
Rhino79 Drives: 2010 Camaro SS L99/Auto Join Date: Jul 2011 Location: Cabot, AR Posts: 2,827 View My Garage	Exactly...lol They made the tubes longer.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
American Racing Headers for the Camaro SS! 32+ RWHP!	southerncarparts	V8 Bolt-Ons & Tunes	77	10-10-2019 10:31 AM
ARH - American Racing 304SS Long Tube Headers \| Limited Time MASSIVE SALE!	AutoAgenda	V8 Bolt-Ons & Tunes	416	06-09-2013 06:08 PM
Stock Header Weight and American Racing Header (LT) Weight?	BaylorCamaro	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	5	10-06-2011 11:08 PM
2010 Camaro American Racing Headers FREE Shipping	MoranoRacing	V8 Bolt-Ons & Tunes	2	02-10-2010 09:45 PM