Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Dynomax Exhaust
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Camaro DIY & HOW-TO instructions & discussions


Reply
 
Thread Tools
Old 12-15-2012, 06:17 PM   #1
DWALEX

 
DWALEX's Avatar
 
Drives: Currently 2016-2SS, Future ZL1/Z28
Join Date: Jul 2010
Location: Kansas
Posts: 912
My new door switch

Here I show this video of my new switches on the doors when I get back from the holidays I'll show how I did and what parts I used to use the stock panel-through connector



Tools required:
T20, and T27 torx socket
7mm socket wrench
Socket screwdriver
Heat shrink tubing
Electrical soldering iron
Solder
Heat gun
Terminal crimper
Phillips screwdriver
Car Panel Removal Tool
Electical Tape
Precision Screwdrivers set
Wire 3 color and black

Parts you need:
door panels 2012-13 (driver and passenger)
door lock/unlock switch D.S#22879460,22847867. P.S#22847868

Conectors tyco (2) #1379029 (need a small mod) I have 1 sets with terminals available
TE CONNECTIVITY Terminals Micro Quadlok Syste Series (8) 963715-1
and for Panel-through connectors, "if you want to use this way" you need :
1- Female HPCS
FCI automotive Connectors #60013031 (1)
2- 1.5 Female Term
FCI automotive Connectors #60000531 (2)
3- 2.8MM Male Term
FCI automotive Connectors #60110631 (1)
4- 1.5MM SWS MALE
FCI Automotive Connectors #60100731 (2)
*these parts are hard to get, especially in small quantities*

Step 1:
I took the switch signal from radio/HVAC control or Body Control Module (X2 L-Blue connector). you can attach the t-tap to this wires. I prefer to solder the wires I would not do this if it was not permanent modification.
door lock switch lock signal Pink/Black wire
door lock switch unlock signal Orange/Black wire
Name:  STEP 1.png
Views: 5552
Size:  7.4 KB
Name:  IMG_20140129_211355_984.jpg
Views: 3972
Size:  74.7 KB
Name:  IMG_20140129_211452_042.jpg
Views: 4173
Size:  59.9 KB

Step 2:
make the connector. this is the switch diagram
Name:  switch conn.jpg
Views: 5484
Size:  155.5 KB

Step 3:
must to pass the lock signal wire through the door connector. this thread can help http://www.camaro5.com/forums/showthread.php?t=155660
here we use the terminals for this connector
if you want to use this mode or can pass the wire around of rubber boot

body harness
Name:  body.jpg
Views: 5342
Size:  50.6 KB

door harness
Name:  door.jpg
Views: 5378
Size:  51.8 KB
on the door harness I changed the wire color. Please don't do that because it can be confusing

Step 4:
as had to pass two wires through the driver door connector. but only has one pin available, *I used the ABL wire (purple) for unlock signal and connect the LED (ABL) to the circuit LED backlight dimming (yellow)
Name:  step 4.png
Views: 5543
Size:  9.6 KB
Name:  STEP5.jpg
Views: 5364
Size:  130.1 KB
ABL with my wiring


these are the steps that I took
__________________

Last edited by DWALEX; 03-13-2014 at 10:33 PM.
DWALEX is offline   Reply With Quote
Old 12-15-2012, 06:23 PM   #2
montreal2010yellow


 
montreal2010yellow's Avatar
 
Drives: 2 LT/RS YELLOW, AUTO., VIN NO. 602
Join Date: May 2010
Location: LAVAL (10 min. north of Montreal), CANADA
Posts: 3,530
Can't see the video, it's private?
__________________
T2 Facia, ACS TL1 Hood, ACS Winglets. G5CR CAI. Hotchsic Strut Brace and more...
montreal2010yellow is offline   Reply With Quote
Old 12-15-2012, 06:31 PM   #3
Caddyroger

 
Caddyroger's Avatar
 
Drives: 2011 RJT Camaro LT2 RS auto shift
Join Date: Dec 2011
Location: Washington state
Posts: 1,861
Quote:
Originally Posted by montreal2010yellow View Post
Can't see the video, it's private?
It plays ok for me.
__________________
Caddy
Caddyroger is offline   Reply With Quote
Old 12-15-2012, 06:32 PM   #4
Caddyroger

 
Caddyroger's Avatar
 
Drives: 2011 RJT Camaro LT2 RS auto shift
Join Date: Dec 2011
Location: Washington state
Posts: 1,861
Quote:
Originally Posted by DWALEX View Post
Here I show this video of my new switches on the doors when I get back from the holidays I'll show how I did and what parts I used to use the stock harness

http://youtu.be/hUc8h_7PlIQ

Happy Holidays, C5 members.
Did you have to buy the door pads?
__________________
Caddy
Caddyroger is offline   Reply With Quote
Old 12-15-2012, 06:34 PM   #5
DWALEX

 
DWALEX's Avatar
 
Drives: Currently 2016-2SS, Future ZL1/Z28
Join Date: Jul 2010
Location: Kansas
Posts: 912
Quote:
Originally Posted by Caddyroger View Post
Did you have to buy the door pads?
yes
__________________
DWALEX is offline   Reply With Quote
Old 12-15-2012, 06:48 PM   #6
Caddyroger

 
Caddyroger's Avatar
 
Drives: 2011 RJT Camaro LT2 RS auto shift
Join Date: Dec 2011
Location: Washington state
Posts: 1,861
Quote:
Originally Posted by DWALEX View Post
yes
That is to expensive for my blood. They are nice that you have in the door.
__________________
Caddy
Caddyroger is offline   Reply With Quote
Old 12-15-2012, 07:12 PM   #7
DWALEX

 
DWALEX's Avatar
 
Drives: Currently 2016-2SS, Future ZL1/Z28
Join Date: Jul 2010
Location: Kansas
Posts: 912
Quote:
Originally Posted by Caddyroger View Post
That is to expensive for my blood. They are nice that you have in the door.
yes I know. I got a set of door panels from a totaled ZL1. I just changed the switch bezel
__________________
DWALEX is offline   Reply With Quote
Old 12-15-2012, 07:33 PM   #8
2SSRS@Gen5diy

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 13,603
good job let use now what you did.
__________________
<img src=images/smilies/thumbdown.gif border=0 alt= title=Thumbdown class=inlineimg />
2SSRS@Gen5diy is offline   Reply With Quote
Old 12-15-2012, 07:51 PM   #9
DWALEX

 
DWALEX's Avatar
 
Drives: Currently 2016-2SS, Future ZL1/Z28
Join Date: Jul 2010
Location: Kansas
Posts: 912
Quote:
Originally Posted by 2SSRS View Post
good job let use now what you did.
yes I will, I'm gonna make a schematic and load some pictures after holiday
__________________
DWALEX is offline   Reply With Quote
Old 12-15-2012, 08:35 PM   #10
Cmlloveless

 
Drives: 2010 2SS RS
Join Date: Jul 2009
Location: Winchester, Ca
Posts: 942
Man where do you guys find these crashed camaros? I can't ever find newer cars at any of the junk yards around me!
Cmlloveless is offline   Reply With Quote
Old 08-05-2013, 02:26 PM   #11
JAustin
 
JAustin's Avatar
 
Drives: (sold) 2011 2LT/RS auto, SW/tan top
Join Date: Jul 2011
Location: Driftwood, TX (Austin area)
Posts: 162
Quote:
Originally Posted by Cmlloveless View Post
Man where do you guys find these crashed camaros? I can't ever find newer cars at any of the junk yards around me!
I'd have to find a crashed 2012-13 convertible! No way I'd pay dealer price for these door panels.

Just another example of what Chevy should have done in the first place (put the power door lock switches on the armrests). My Jeep Wrangler has power window switches on the center console and power door lock switches on the doors. Whenever I switch vehicles, it takes a few tries to get reoriented!
JAustin is offline   Reply With Quote
Old 08-05-2013, 04:22 PM   #12
DWALEX

 
DWALEX's Avatar
 
Drives: Currently 2016-2SS, Future ZL1/Z28
Join Date: Jul 2010
Location: Kansas
Posts: 912
I bought a pair of used panels just change the switch bezel and sold it again
__________________
DWALEX is offline   Reply With Quote
Old 12-26-2013, 08:24 PM   #13
CamaroLS

 
CamaroLS's Avatar
 
Drives: 2014 Blue Ray Met. Camaro 1SS Vert
Join Date: Feb 2012
Location: Indiana
Posts: 1,512
Thank you
CamaroLS is offline   Reply With Quote
Old 12-27-2013, 06:33 PM   #14
CamaroLS

 
CamaroLS's Avatar
 
Drives: 2014 Blue Ray Met. Camaro 1SS Vert
Join Date: Feb 2012
Location: Indiana
Posts: 1,512
I bought some door panels months ago for the door inserts and put the door panels back in the box and left them alone till now. I was working on the RS lights today and decided to pull the door panels back out and look what I found. These must have been off of a 2013. So now I can do this mod and wait to do the Mylink upgrade. Yah
Attached Images
 
CamaroLS is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:20 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.