Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Emblempros
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Sponsors Classifieds Marketplace > Transmission / Driveline

View our official forum sponsors list.


Reply
 
Thread Tools
Old 02-15-2013, 05:01 PM   #1
JDP Sales

 
JDP Sales's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 11,024
GM 3.45 & 3.91 Gear Sets! | BEST prices & FREE shipping | JDP Motorsports

JDP Motorsports is proud to offer the Genuine GM Camaro 3.45 and 3.91 Gear Sets for your 2010-2015 Camaro SS!

Features a GM OEM ring & pinion gear set for the 2010-2015 Camaro SS/1LE that were designed for long life and quiet operation. The manufacturing process used combined with a professional installation will insure quiet factory like operation of your differential unlike less expensive gears sets that often can cause gear whine even if they are installed correctly. The 3.91 ratio ring and pinion provides a 13% increase in effective rear wheel torque multiplication compared to the factory 3.45 ring & pinion (MT) and a 20% increase in effective rear wheel torque multiplication compared to the factory 3.23 ring & pinion that is found on the A6 equipped Camaro SS. The 3.45 ratio ring and pinion provides a 7% increase in effective rear wheel torque multiplication compared to the factory 3.27 ring & pinion that is found on the A6 equipped Camaro SS.

When cruising at 60 mph in 6th gear, a manual transmission vehicle will see an approximate increase in engine speed of 180 RPM or 13% increase while automatic transmission vehicles will see an approximate increase of 300 rpm or 20% increase. With the 3.45 gear set, an automatic transmission vehicle will see an approximate increase of 90 rpm or 7% increase. Automatic & manual transmission equipped vehicles will require ECM calibration changes to correct the speedometer.

Genuine GM - 2010-2015 Camaro SS 3.45 Gear Set - Part # GM-19301506
Genuine GM - 2010-2013 Camaro SS 3.91 Gear Set - Part # GM-19301504
Genuine GM - 2014-2015 Camaro SS 3.91 Gear Set - Part # GM-19329768


Product Features:
  • Genuine GM Part
  • Direct Replacement for A6 Camaro SS Models
  • SAE 4320 Steel Alloy Gear Material
  • Ring and Pinion Installation Kit
  • Will Not Void Vehicle Warranty
  • FREE SHIPPING!
Gear Set Includes:
  • Gear Kit
  • Gasket
  • Oil Seal
  • Nut (3)
  • Bolt (3)
  • Bolt (3)
  • Shim Kit
  • Limited Slip diff Oil Additive

MSRP: $735.95
Sale $449.95

We appreciate your interest in our products. Please feel free to call, PM or email us anytime with questions!

Best regards,

Tyler
801.545.4215
Click HERE to send me a personal message
sales@jdpmotorsports.com
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215

Last edited by JDP Sales; 01-22-2016 at 09:49 AM.
JDP Sales is offline   Reply With Quote
Old 02-19-2013, 10:42 PM   #2
Rod Knock
 
Rod Knock's Avatar
 
Drives: 2011 IOM Camaro SS convertible
Join Date: Nov 2012
Location: San Antonio, TX
Posts: 344
any way to recalibrate the speedo without voiding warranty?
Rod Knock is offline   Reply With Quote
Old 02-26-2013, 02:42 PM   #3
Nitroman28

 
Nitroman28's Avatar
 
Drives: 2010 Camaro SS 416/4L80
Join Date: Oct 2010
Location: Arkansas
Posts: 1,837
Is this install kit everything I need other then the gasket?
Nitroman28 is offline   Reply With Quote
Old 02-26-2013, 04:40 PM   #4
JDP Sales

 
JDP Sales's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 11,024
Quote:
Originally Posted by Rod Knock View Post
any way to recalibrate the speedo without voiding warranty?
PM sent
Quote:
Originally Posted by Nitroman28 View Post
Is this install kit everything I need other then the gasket?
Yes that is correct! You should be able to reuse your stock gasket as well.

Feel free to call, PM or email me anytime with questions.

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215
JDP Sales is offline   Reply With Quote
Old 02-27-2013, 08:57 PM   #5
papawattz
 
papawattz's Avatar
 
Drives: 2010 Camaro 2SS/RS +2014 El Tigre
Join Date: Mar 2011
Location: South West Michigan
Posts: 333
Do you need the Ring and Pinion Installation Kit, or can you just install the gear set and be OK?
papawattz is offline   Reply With Quote
Old 02-28-2013, 10:21 AM   #6
JDP Motorsports

 
JDP Motorsports's Avatar
 
Drives: 2011 Camaro SS/ 2016 Camaro SS
Join Date: Jun 2009
Location: Sandy, Utah
Posts: 3,405
Quote:
Originally Posted by papawattz View Post
Do you need the Ring and Pinion Installation Kit, or can you just install the gear set and be OK?
You'll need the installation kit in order to get the gears set up correctly. It also includes new bearings which I suggest replacing while you're doing the installation. Please feel free to call, email or PM me anytime with questions. We appreciate your interest in our products and have a great day!

Kind regards,

Jordan Priestley
888.308.6007
__________________

Click HERE to send me a PM | jordan@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215
JDP Motorsports is offline   Reply With Quote
Old 02-28-2013, 12:29 PM   #7
xtreme industries
 
Drives: 2010 Camaro 2lt RS
Join Date: Sep 2009
Location: Calgary, AB, Canada
Posts: 553
do you have an install kit for a V6?
__________________
2010 Camaro 2lt RS, IOM on IOM, M6, eibach springs, eibach sways, ported throttle body, black ice-olator, RX catch can, OBX headers - no cats, Pypes cat back, Vibrant resonators, injen intake, DRL over ride, decepticon fender emblems, transformer sill plates, transformer script on cowl, more to come.
xtreme industries is offline   Reply With Quote
Old 02-28-2013, 12:58 PM   #8
blazzin1


 
blazzin1's Avatar
 
Drives: 2010 2SS/RS R6P
Join Date: Nov 2008
Location: Plant City, FL
Posts: 4,361
Quote:
Originally Posted by JDP Motorsports View Post
You'll need the installation kit in order to get the gears set up correctly. It also includes new bearings which I suggest replacing while you're doing the installation. Please feel free to call, email or PM me anytime with questions. We appreciate your interest in our products and have a great day!

Kind regards,

Jordan Priestley
888.308.6007
I recently had my 3.45's replaced with these 3.91 gears, and I used the Lingenfelter Kit as well. One thing I did not understand is the theory of replacing a ball bearing (such as the two pinion bearings included in the kit), without replacing the associated races. My installer didn't understand that either, and sourced the races direct from GM, and replaced them too. I know many people say that in most cases the bearings are fine and don't need to be replaced anyway. But if you're going to do it, I thought it was standard practice to ALWAYS replace the race along with the bearing. Any thoughts on this Jordan???
blazzin1 is offline   Reply With Quote
Old 03-01-2013, 01:05 PM   #9
Orange2010SS
 
Orange2010SS's Avatar
 
Drives: Orange 2010 2SS LS3
Join Date: Apr 2011
Location: Raleigh, NC
Posts: 155
Just placed my order online. Looking forward to receiving these and having them installed!! Thx
Orange2010SS is offline   Reply With Quote
Old 03-07-2013, 02:32 PM   #10
xtreme industries
 
Drives: 2010 Camaro 2lt RS
Join Date: Sep 2009
Location: Calgary, AB, Canada
Posts: 553
once again - do you have or will this install kit work on the V6 diff?
__________________
2010 Camaro 2lt RS, IOM on IOM, M6, eibach springs, eibach sways, ported throttle body, black ice-olator, RX catch can, OBX headers - no cats, Pypes cat back, Vibrant resonators, injen intake, DRL over ride, decepticon fender emblems, transformer sill plates, transformer script on cowl, more to come.
xtreme industries is offline   Reply With Quote
Old 03-07-2013, 04:26 PM   #11
JDP Motorsports

 
JDP Motorsports's Avatar
 
Drives: 2011 Camaro SS/ 2016 Camaro SS
Join Date: Jun 2009
Location: Sandy, Utah
Posts: 3,405
Quote:
Originally Posted by xtreme industries View Post
do you have an install kit for a V6?
Quote:
Originally Posted by xtreme industries View Post
once again - do you have or will this install kit work on the V6 diff?
We haven't had a V6 Manual Camaro come in for a set of gears but I know the gears are the same (Manual only) so I'd imagine everything else would be as well.

Quote:
Originally Posted by Orange2010SS View Post
Just placed my order online. Looking forward to receiving these and having them installed!! Thx
Thank you for your business and support! Please feel free to call, email or PM me anytime with questions. Have a great day and we'll talk to you soon!

Quote:
Originally Posted by blazzin1 View Post
I recently had my 3.45's replaced with these 3.91 gears, and I used the Lingenfelter Kit as well. One thing I did not understand is the theory of replacing a ball bearing (such as the two pinion bearings included in the kit), without replacing the associated races. My installer didn't understand that either, and sourced the races direct from GM, and replaced them too. I know many people say that in most cases the bearings are fine and don't need to be replaced anyway. But if you're going to do it, I thought it was standard practice to ALWAYS replace the race along with the bearing. Any thoughts on this Jordan???
I suggest using new races when replacing the bearings. This is something we will end up adding to the Lingenfelter kit in the very near future to make it easier on shops and customers to get the gears installed. We're also offering assembled diffs on a core exchange program with various options.

Please feel free to call, email or PM me anytime with questions. I appreciate everyone's support and have a great day!

Kind regards,

Jordan Priestley
888.308.6007
__________________

Click HERE to send me a PM | jordan@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215
JDP Motorsports is offline   Reply With Quote
Old 03-07-2013, 04:51 PM   #12
67motorcat
Blown Cool Breeze
 
67motorcat's Avatar
 
Drives: 2011 Black on Black 2SS M6
Join Date: Jul 2010
Location: Pinehurst NC
Posts: 1,027
My 2 cents

See post # 11 and #23 on this thread.I was there in person as well.

This same guy will be putting mine in this coming Tuesday as well
A lot of questions should be answered,My take is the GM gears will go in without the need for a "Install Kit"....remember this is not a Aftermarket part.

Most Camaro's that still have low mileage will have no need to change out the bearings,so everything stays as it needs to be.

Not saying the install kit is a bad thing,but lots of guys are doing it with out and everything is as it should be.I couldn't comment if all the bearings and everything are changed...that's when it gets more complicated.

Hope this helps....the swap is remarkably easy


http://www.camaro5.com/forums/showthread.php?t=265123
__________________
2011 Black on Black 2SS M6
Had a 2010 IBM 2SS M6
Enjoy life.Think of all the women on the Titanic who passed up dessert.
67motorcat is offline   Reply With Quote
Old 03-22-2013, 05:59 PM   #13
LS2SLOW
 
LS2SLOW's Avatar
 
Drives: 5th Gen
Join Date: Feb 2010
Location: Chesterfield
Posts: 362
ordered a set...looking foward to summer
LS2SLOW is offline   Reply With Quote
Old 03-28-2013, 11:46 AM   #14
2010_5thgen


 
2010_5thgen's Avatar
 
Drives: 2012 Porsche Panamera 4
Join Date: Nov 2007
Location: Ohio
Posts: 3,277
still have the deal on the gears?

so the 3.91 is the 1le gear and the m6 ss is a 3.45? and nothing involved other than a regular gear swap and retune? seems pretty easy.
__________________
http://www.gofundme.com/n7ne44

2012 Porsche Panamera 4
2010_5thgen is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:52 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.