You are browsing camaro5 
 |
|
05-20-2013, 12:47 PM
|
#1 |
 
Drives: 2010 CAMARO 2SS/RS Join Date: May 2010
Location: CAPE CORAL, FLORIDA
Posts: 77
|
drag tire help please!!
I have a 2010 SS/m6. Its currently pushing 705 rwhp and 679 tq. Hits 600 tq at 2500 rpm. On the street i have a set of stock wheels widened to 10.75 and running 315 invos. They do fairly well on the street but completely suck at the track. I only plan on going to the track a couple times a year. So not looking to spend too much on a full drag set up that i wont use a whole lot. Any one have any lower cost suggestions? I dont know a whole lot about how drag tires run and what is allowed and what isnt.
|
|
|
|
05-20-2013, 01:00 PM
|
#2 |
            
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
If you're looking for a set for both street/strip duty, I'd look into the nitto nt555r drag radials. They're a pretty good drag radial that will work on the street as well. If you're going for just track use, then something like the M&H, Mickey Thompson, or NT05r drag radials will work well. Depends on what you want.
__________________
 Click Picture for Build Thread |
|
|
|
|
|
|
|
 |
|
|
