|08-12-2009, 12:38 PM||#1|
Drives: 2013 Artic White GrandSport
Join Date: Jun 2009
Location: In the shop
Vengeance Racing builds 496 Warhawk... Dyno Graph/Idle Video/Pics Inside
Im finally getting around to posting up about our recent 496 Warhawk build. We finished this project a few months back. GMHTP did a full feature on the build. All details can be seen at:
Vehicle- 2002 SS Camaro... 32 ORIGINAL MILES upon delivery
ProLine/Vengeance Spec 496 Cubic Inch Warhawk Shortblock
-Callies Connecting Rods
-Wiseco Custom Pistons/Rings
TrickFlow 235cc CNC Cylinder Heads
Vengeance Spec Solid Roller Camshaft- 266/274 .664/.674
Comp Solid Lifters
Manton 3/8 Hardened Pushrods
ARH Custom 1 7/8x2x 3 1/2 Stainless Longtubes
ARH 3 1/2 Inlet x 3" Outlet ORY
SLP Dual Dual Catback
DMH Dual Electric Cutouts
Textralia ExoSkel Clutch Kit
FAST 92mm Intake Manifold
Modified to 96mm
Nick Williams 96mm Throttlebody
Fast Toys 85mm Lid
Silicone Coupler to replace MAF
UMI K Frame/A Arms
UMI Torque Arm
Eibach/GMMG Lowering Springs
Strange 12 Bolt Rear End w/ 3 :73s
MGW Short Throw Shifter
Built/Installed/Tuned @ Vengeance Racing
Video- Complete Walk Around- Cutouts Closed & Open
|08-13-2009, 03:05 PM||#4|
Drives: 2010 Camaro 2SS
Join Date: May 2009
- Life is hard when destiny believes in you.
- As coherent as a pit bull in a spin dryer. A dribbling tartan frothbucket.
- Good money, bad girls. How can life be any better?
- God saves. The devil invests.
- This may be the ultimate guide to problem solving.
|08-13-2009, 05:18 PM||#5|
Drives: Hyundai Sonata
Join Date: Feb 2009
Location: Little Rock, AR
You know, this got me thinking. Why don't you ever hear of anyone (or at least I don't ever hear of anyone) using the 8.1L truck engines? Are the heads just that crappy? Is the block not strong enough? Sorry to get off track, I was just curious.
|08-14-2009, 12:56 AM||#6|
Join Date: Apr 2009
Beautiful car. I always had a sweet spot for black LS1 SS Camaros... makes me want to go out and grab one of these cheap used ones again.