08-29-2014, 10:05 AM | #1 |
Drives: 2012 Camaro ZL1 #1658 Join Date: Jul 2010
Location: Pennsauken, NJ
Posts: 595
|
Carbon fiber maintenance
This may have been on here before and if so I apologize. Having said that, I was wondering if there is any specific maintenance you should do to carbon fiber parts such as the hood. If I understand correctly you should not wax these pieces.
__________________
2012 ZL1 (BLACK on BLACK)
Roto-Fab CAI RX Catch Can 3M Paint Protection 2011 1SS/RS (BLACK on BLACK) <SOLD> |
08-29-2014, 10:38 AM | #2 |
|
More than likely your carbon fiber is clear coated. In that case, you can treat it exactly like the paint.
__________________
[B]
|
08-29-2014, 01:00 PM | #3 |
Drives: a few Join Date: Mar 2014
Location: Colorado
Posts: 507
|
If you are talking about the CF that comes from the factory, that is clear coated. Therefore care for it just like you would the painted pieces. If it's aftermarket CF, check with whom you purchased for clear coat, if it's vinyl, etc.
__________________
1967 C/10 PROJECT TRUCK | DETAILING EXPERT | CRAFT BEER ENTHUSIAST |
08-29-2014, 08:34 PM | #4 |
|
Op there were two carbon fiber hood inserts available in 2012. One was exposed and was clear coated ( you can see the weave ) that can be washed waxed polished just like paint. The other was painted a mat finish and you can not see the weave. The later was rare and should Not be waxed or polished. Just soap and water and dry with a good microfiber.
If yours looks like this, wax and polish away.
__________________
Laus Deo
|
08-29-2014, 08:41 PM | #5 | |
Drives: 2012 Camaro ZL1 #1658 Join Date: Jul 2010
Location: Pennsauken, NJ
Posts: 595
|
Quote:
__________________
2012 ZL1 (BLACK on BLACK)
Roto-Fab CAI RX Catch Can 3M Paint Protection 2011 1SS/RS (BLACK on BLACK) <SOLD> |
|
08-29-2014, 08:43 PM | #6 |
|
Have at it and post some pics we are all here to learn and share info.
__________________
Laus Deo
|
08-29-2014, 08:57 PM | #7 |
Drives: 2012 Camaro ZL1 #1658 Join Date: Jul 2010
Location: Pennsauken, NJ
Posts: 595
|
Will do. Thanks again.
__________________
2012 ZL1 (BLACK on BLACK)
Roto-Fab CAI RX Catch Can 3M Paint Protection 2011 1SS/RS (BLACK on BLACK) <SOLD> |
|
|
|
|