**SOLD*T-Rod Mod LS3/L76 intake manifold forsale $575 SHIPPED

[Lablkv6z]

**SOLD** Up forsale is a T-Rod Modded LS3/L76 intake manifold. This is an ACdelco intake that I modified using similar techniques as RCrawford used years ago. One major difference is, I use round aluminum rods bolted and epoxied inside the manifold. Nylon blanks are epoxied on the floor and sanded smooth.

Proven results are 10-20 whp and 10+ wtq 2500-5000 rpm, peak power will vary depending on the engine setup. 92mm throttle body fits. (Search rod mod)

This is a sleeper manifold vs a FAST 102 manifold. Serial T-RM 030.

I’ve been running my first ever one on a 427LS3 for the last two race seasons. Car traps 129-131mph.

This modification can be bought out right at a reputable site for $775 plus shipping*, I’m offering my variation for $575 SHIPPED, no core charge.

PM or Email at:

terrence.orgeron@delmarsystems.com

Thanks.

**Please note, this intake was a core that I washed/degreased then modded.
The intake ports on this manifold are smoothed. There are some superficial scuffs on the top of this intake. I also filled in (2) small holes next to the MAP sensor port. See images taken with flash on.

[Lablkv6z]

SOLD to a customer on FB, thanks guys.