Injen V6 true cold air intake - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bng804 · 01-24-2010, 01:54 PM

It looks like these are getting ready to be released. The claimed gains are impressive. Auto Everything is showing these at $320 and shipping next week.

I've been waiting for a system that gets the filter out of the engine compartment and Injen appears to be the first. Anybody got any other info on these?

trudawg660 · 01-24-2010, 02:03 PM

why do companies make their tube out of metal knowing the IAT sensor inside it. i don't get it

brAnd7onX · 01-24-2010, 02:04 PM

Injen makes great stuff. Only problem with the true CAI is the long tubing. I prefer the shorter tubing like the short ram so the air doesn't have to travel as far.

scrming · 01-24-2010, 02:25 PM

Quote:

Originally Posted by bng804

It looks like these are getting ready to be released. The claimed gains are impressive. Auto Everything is showing these at $320 and shipping next week.

I've been waiting for a system that gets the filter out of the engine compartment and Injen appears to be the first. Anybody got any other info on these?

Think the ADM race version has a scoop down low or something like that...

bluedevil02 · 01-24-2010, 02:48 PM

awesome, injen puts out good products

Blade · 01-24-2010, 02:55 PM

What about flooding issues on these units?

bng804 · 01-24-2010, 03:29 PM

Quote:

Originally Posted by Blade

What about flooding issues on these units?

I've had AEM cold air intakes in the past on other vehicles that put the filter literally inches off the ground with no problems. If you live in an area with lots of rain an the possibility of standing water, it might be a concern. You could always stick a bypass valve between the pipes if you're worried about it.

scrming · 01-24-2010, 03:52 PM

anybody find a better picture or more info? Looks like the MAF is still right over top of the radiator hose...???

ROD1 · 01-24-2010, 04:45 PM

16 hp is a pretty bold claim for a CAI on a V6.

trudawg660 · 01-24-2010, 05:00 PM

Quote:

Originally Posted by ROD1

16 hp is a pretty bold claim for a CAI on a V6.

why you say it like that, 16hp is a bold claim for any car.

trudawg660 · 01-24-2010, 05:01 PM

and it says HP not RWHP

bng804 · 01-24-2010, 05:02 PM

Quote:

Originally Posted by scrming

anybody find a better picture or more info? Looks like the MAF is still right over top of the radiator hose...???

I couldn't find any other info or pics. I emailed Injen and asked for better pictures and invited them to comment on this thread.

kga10734 · 01-24-2010, 10:11 PM

Looks a lot like the one Fastlane did for the V8's.

ROD1 · 01-25-2010, 08:21 AM

Quote:

Originally Posted by trudawg660

why you say it like that, 16hp is a bold claim for any car.

Indeed but lesser hp will net lesser gains.

bng804 · 02-03-2010, 11:20 PM

Injen responded to my email and delivered all the info on their new CAI including a dyno sheet. I've got one on preorder now.

travisplusdunks · 02-03-2010, 11:32 PM

how did you preorder..?

bng804 · 02-03-2010, 11:43 PM

Quote:

Originally Posted by travisplusdunks

how did you preorder..?

Ordered from AutoAnything. They are currently showing: "Ships between 02/05/2010 - 02/09/2010"

travisplusdunks · 02-04-2010, 12:15 AM

thank you. just pre-ordered mine!

BigGriff · 02-04-2010, 03:01 AM

interesting this is the first cai ive seen that relocates the filter to behind the bumper for the v6

PieNsky · 02-04-2010, 08:43 AM

That would be awesome if someone would do a before and after dyno.

shad2009 · 02-04-2010, 08:55 AM

wut about rain and snow? won't that effect the CAI?

rolnslo · 02-04-2010, 10:05 AM

Where'd they get the freak v6 motor from? Is anyone else on here pulling 260hp stock? If not, what else has been done to that car before the CAI was installed? Tune? Cat-back? Headers?

scrming · 02-04-2010, 10:33 AM

Quote:

Originally Posted by rolnslo

Where'd they get the freak v6 motor from? Is anyone else on here pulling 260hp stock? If not, what else has been done to that car before the CAI was installed? Tune? Cat-back? Headers?

guessing the car is a manual... they seem to dyno quite a bit higher... that's my wild guess of the day..

bng804 · 02-04-2010, 10:40 AM

Quote:

Originally Posted by scrming

guessing the car is a manual... they seem to dyno quite a bit higher... that's my wild guess of the day..

Yep, it's says 6SPD on the dyno sheet. My buddy's LS manual pulled 258 bone stock w/ less than 500 miles on it, so I don't think it's too far off....

scrming · 02-04-2010, 10:50 AM

Quote:

Originally Posted by bng804

Yep, it's says 6SPD on the dyno sheet. My buddy's LS manual pulled 258 bone stock w/ less than 500 miles on it, so I don't think it's too far off....

of course that doesn't mean it has to be a manual.... my auto's a 6 speed too...

01-24-2010, 01:54 PM	#1
bng804 Drives: '10 Victory Red 2LT Join Date: Oct 2009 Location: Oklahomaville Posts: 208 View My Garage	Injen V6 true cold air intake It looks like these are getting ready to be released. The claimed gains are impressive. Auto Everything is showing these at $320 and shipping next week. I've been waiting for a system that gets the filter out of the engine compartment and Injen appears to be the first. Anybody got any other info on these?

01-24-2010, 02:55 PM	#6
Blade Drives: 2010 Camaro 1LT CGM RS Join Date: Dec 2009 Location: Charlotte Posts: 4,500 View My Garage	What about flooding issues on these units? __________________ Signature by Bmorecam Follow me on Twitter Build Thread

01-24-2010, 03:52 PM	#8
scrming Red Brick of Vengeance! Drives: 12 Second Brick Join Date: Jun 2009 Location: at my pulpit Posts: 7,490	anybody find a better picture or more info? Looks like the MAF is still right over top of the radiator hose...??? __________________ 2013 MRT Laguna ST - 249 WHP & 339 WTQ 2011 Ford Flex EcoBoost Limited - 12.727 @ 109.790 MPH

01-24-2010, 10:11 PM	#13
kga10734 Don't Feed the Troll Drives: 2010 Camaro 2LT/RS & 1999 Corvette Join Date: Jun 2009 Location: Montgomery, TX Posts: 782	Looks a lot like the one Fastlane did for the V8's. __________________

02-03-2010, 11:20 PM	#15
bng804 Drives: '10 Victory Red 2LT Join Date: Oct 2009 Location: Oklahomaville Posts: 208 View My Garage	Injen responded to my email and delivered all the info on their new CAI including a dyno sheet. I've got one on preorder now. Attached Images Last edited by bng804; 02-03-2010 at 11:38 PM.

01-24-2010, 02:03 PM	#2
trudawg660 Drives: 2006 Dodge Charger / 2SS IOM Join Date: Dec 2008 Location: United Kingdom Posts: 1,644	why do companies make their tube out of metal knowing the IAT sensor inside it. i don't get it

01-24-2010, 02:04 PM	#3
brAnd7onX Team L99 Drives: 2012 Camaro SS IOM Join Date: Oct 2009 Location: SoCal Posts: 1,535	Injen makes great stuff. Only problem with the true CAI is the long tubing. I prefer the shorter tubing like the short ram so the air doesn't have to travel as far.

01-24-2010, 02:48 PM	#5
bluedevil02 Drives: 2LT/RS Join Date: Jul 2009 Location: San Antonio Posts: 819	awesome, injen puts out good products

01-24-2010, 04:45 PM	#9
ROD1 Back to the hunt.... Drives: 2010 Camaro RS V6 #1301 DOB 3/23/09 Join Date: Aug 2009 Location: Ithaca NY Posts: 2,562	16 hp is a pretty bold claim for a CAI on a V6.

01-24-2010, 05:01 PM	#11
trudawg660 Drives: 2006 Dodge Charger / 2SS IOM Join Date: Dec 2008 Location: United Kingdom Posts: 1,644	and it says HP not RWHP

02-03-2010, 11:32 PM	#16
travisplusdunks Drives: 2010 Camaro LS Victory Red Join Date: Aug 2009 Location: New York Posts: 62	how did you preorder..? __________________ im from a younger generation, the 2010 camaro will be the one i remember when im old. 2010 camaro was my first car!

02-04-2010, 12:15 AM	#18
travisplusdunks Drives: 2010 Camaro LS Victory Red Join Date: Aug 2009 Location: New York Posts: 62	thank you. just pre-ordered mine! __________________ im from a younger generation, the 2010 camaro will be the one i remember when im old. 2010 camaro was my first car!

02-04-2010, 03:01 AM	#19
BigGriff Drives: 2000 Ford Ranger, 2007 Silverado Join Date: Nov 2009 Location: Buffalo, NY Posts: 35	interesting this is the first cai ive seen that relocates the filter to behind the bumper for the v6

02-04-2010, 08:43 AM	#20
PieNsky Drives: Victory Red 1LS Join Date: Nov 2008 Location: Louisville,KY Posts: 1,738 View My Garage	That would be awesome if someone would do a before and after dyno. __________________ Stainless Works Headers & Exhaust RevolutionSS Hood

02-04-2010, 08:55 AM	#21
shad2009 "Cassie" Drives: 2007 Tungsten Grey Mustang GT Join Date: Sep 2009 Location: Massachusetts Posts: 1,153	wut about rain and snow? won't that effect the CAI? __________________ Currently driving - 2007 Mustang GT Future Wheels - 2014 Ford Mustang GT & 2014 Chevy Camaro

02-04-2010, 10:05 AM	#22
rolnslo Farewell 2010 1LT/RS... Drives: 2011 2SS/RS SGM Join Date: Mar 2008 Location: Houston, TX Posts: 4,304 View My Garage	Where'd they get the freak v6 motor from? Is anyone else on here pulling 260hp stock? If not, what else has been done to that car before the CAI was installed? Tune? Cat-back? Headers? __________________ #1: 2010 1LT/RS Victory Red M6 - July 2009-Oct 2011 (SOLD). #2: 2011 2SS/RS Synergy Green A6 - Oct 2011.....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roto-Fab Cold Air Intake from Phastek Performance	Sean@Phastek	V8 Bolt-Ons & Tunes	17	06-09-2010 12:31 PM
NEW PRODUCT! K&N Typhoon Cold Air Intakes!!!	MoranoRacing	V8 Bolt-Ons & Tunes	2	12-28-2009 11:39 AM
GMPP Cold Air Intake	chevyridinghigh	Tuning / Diagnostics -- engine and transmission	7	12-21-2009 05:21 PM
Cold air intake questions	alexdc	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	36	12-04-2009 10:42 AM
ADM Performance Cold air intake makes 18rwhp and 18 tq over stock airbox	ADM PERFORMANCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	129	11-10-2009 07:29 PM