Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment (https://www.camaro5.com/forums/forumdisplay.php?f=99)
-   -   LSx Dry Sump Setup (Dailey Engineering / Peterson Fluid Systems) (https://www.camaro5.com/forums/showthread.php?t=533998)

MPD47 07-16-2018 09:04 AM

LSx Dry Sump Setup (Dailey Engineering / Peterson Fluid Systems)
 
1 Attachment(s)
LSx Dry Sump Setup $4500 + Shipping. (UPS Domestic / DHL International)

Dailey Engineering 3 Stage Dry Sump Pump (Fresh from service at Dailey Engineering, 0 hours) Pump Mounts directly to the billet pan, no need for scavenge lines to the pump.

Dailey Engineering 3 Stage Billet Aluminum LS Dry Sump Pan w/ Two Brand New Drive Belts

GST Low Friction PTFE LS Rear Main Seal (Brand New)

Aluminum Breather tank with AN-16 Male Fitting w/
-Aeroquip AN-16 120 Degree
-Aeroquip AN-16 45 Degree
-Aeroquip AN-16 Stainless Hose

Steel AN-10 to LS Oil Galley (Short)

Aluminum AN-10 to LS Oil Galley (Long)

LS3 Valve Cover w/ AN-12 Welded Fitting for Peterson Crankcase Vacuum Regulator

Peterson Fluid Systems Crankcase Vacuum Regulator 08-0455

Peterson Fluid Systems 08-0010 - 3 Gallon Oil Tank Dual Scavenge Inlet w/ -Aeroquip FBM2170 - Aeroquip Reducers Fitting, Union Reducer, Male -16 AN to Male -12 AN, Aluminum, Blue
-Aeroquip FBM2170 - Aeroquip Reducers Fitting, Union Reducer, Male -16 AN to Male -12 AN, Aluminum, Blue
-Aeroquip FBM2170 - Aeroquip Reducers Fitting, Union Reducer, Male -16 AN to Male -12 AN, Aluminum, Blue -Peterson Fluid Systems 08-0101 Dry Sump Oil Tank Mounting Bracket -Peterson Fluid Systems 08-0101 Dry Sump Oil Tank Mounting Bracket

Peterson Fluid Systems 09-0452 - 60 Micron Oil/Fuel Filter with Bypass -12AN Fittings w/
-Peterson Fluid Systems 09-0400-027 End Cap Inlet -12 W/-10 w/ 1/8NPT PortT
-RaceGrade 1/8NPT Liquid Temp Sensor M 25-2197
-Aeroquip AN-10 Straight
-Aeroquip AN-10 120 Degree
-Aeroquip AN-10 Stainless Hose

XRP Inline Oil Filter Housing with Wiggins -16 Connections

ARP 234-2504 - LS7/LS3 Dry Sump 12PT Balancer Bolt Kit

ATI Super Damper Serpentine Series Harmonic Balancers 917279 w/ Dry Sump Drive Gear Inner Hub

You need -16 lines to hook this up depending on where you mount the tank. I can provide you with AN fittings or Wiggins clamps depending on how you want to install this.

https://www.camaro5.com/forums/attac...1&d=1531749844

MPD47 08-01-2018 10:40 AM

Bump.

MPD47 08-16-2018 06:38 AM

Bump

olblue75 08-16-2018 07:25 PM

Man this is such a cool system!!

MPD47 08-29-2018 06:31 PM

Bump.

MPD47 09-13-2018 12:26 PM

Bump.

Quake954rr 10-15-2018 11:17 AM

still available ?

MPD47 10-15-2018 11:23 AM

Yep.

On ebay:

https://www.ebay.com/itm/183471892519

MPD47 10-26-2018 07:32 AM

Bump, for those of you making offers the total cost on this system was $6800+, a $2000 offer isn't going to cut it.


All times are GMT -5. The time now is 01:38 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.