Looking for rear subframe bushing washers/hats (takeoffs or part number)
 

I'm hoping someone out there has a set of these that they removed for solid bushings. I literally only need the washers that the bushings sit on. The bigger one is somewhat cone shaped.

Mine are damaged and while I would love to throw solid mounts on there, I just don't know when I'm going to be able to get it done. I can swap out the metal washers real quick for a quick fix for now.

I'm not finding these on any parts sites, unless it's considered part of the whole subframe, but that is showing discontinued.

I had the same problem trying to find these. GM would not sell these seperately and I could only get them new if I purchased the entire subframe. Dealer suggested going to a salvage yard and see if they would sell them.

I took time and repaired and reshaped my old ones and reused them.

Yeah I'm afraid of this. I may reach out to hawk and see if they can get me a set for cheap, otherwise I may be forced to go the solid route...

At least one of mine is totally beyond repair, like the steel is basically crumb cake, and the others are not much better. I'll try to get a picture later just to show you the horror of it!

I suggest you install the solid mounts, with the right tools it is not a bad job.

Here's the horror show!

https://i.imgur.com/kVmeKTU.jpeg

Here is what I have.

Those look much better than mine! I sent you a pm, if you don't need them anymore I'll happily take them!