[SS_Dave]

Originally Posted by KillboyPowerhead

Whatever 74 + 120° is, you may want to make sure it's at least 165 ft/lbs (https://www.camaro5.com/forums/showt...=474155&page=5). I just did 165 ft/lbs with some blue LocTite and the cradle still hasn't fallen off after 5 years.

Regarding not reusing TTY bolts, found these:
https://www.felpro.com/technical/tec...tty-bolts.html
https://www.camaro5.com/forums/showthread.php?t=509802
https://www.camaro5.com/forums/showthread.php?t=512741

With that said I couldn't find any info on identifying a TTA vs TTY bolt other than by torquing it and seeing if it stretched. Again, I've reused the bolts for the suspension and calipers multiple times with some blue LocTite and torquing them down "gudentite" and nothing has fallen off.

74lbs plus another 120degrees of rotation.