View Single Post
Old 11-27-2010, 11:16 PM   #4
Mr. Wyndham
I used to be Dragoneye...
 
Mr. Wyndham's Avatar
 
Drives: 2018 ZL1 1LE
Join Date: Jan 2007
Location: Buffalo, NY
Posts: 31,873
Send a message via AIM to Mr. Wyndham
Quote:
Originally Posted by 2K05GT View Post
I went throught the performance upgrades list and picked out my options there, But I would like to see a list of Weight reduction options that do not affect driver confort, I am of course comparing to the options on the mustang like
Aluminum Drive Shaft
Radiator support
K member brace
things like this. I want to make my Camaro loose a few hundred pounds without touching the inside stuff like seats ect..

Any Ideas? Links and prices?
The stock exhaust manifolds and mufflers are worth about 50lbs if you replace them all.

You could switch from the stock solid sway bars to hollow pieces for about 15-20lbs

The rotors could be replaced with two-piece units, and the wheels could be swapped out, too and possibly save about 10-15lbs per corner.

If you want to get down to the nitty-gritty, you could remove the floor pan and mat of the trunk, the engine cover, and the owner's manual ().

EDIT: But they say 10hp is worth 100lbs in the quarter mile. So I would recommend you save a few thousand dollars and install drop springs, hollow sways, a cat-back exhaust, and a good CAI.

That'll loose 50-75lbs and gain maybe 15-20hp.
__________________
"Keep the faith." - Fbodfather
Mr. Wyndham is offline   Reply With Quote