Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Camshaft in a week, your guess at dyno numbers

Prochargedchevyi · 03-27-2011, 09:48 AM

FWIW the G6X3 is a great cam if it's used with the correct supporting mods. I think you'll pick up at least 40+rwhp by going with the long tubes. Just make sure you get a 7/8 primary and not a 3/4. No sense in spending the money and not getting the full potential out of the setup.

I installed the same cam in a vette for a client in Florida and with headers, ported TB, CAI, and Fast intake he made 500rwhp. With Nitrous he pushed over 700rwhp and ran low 10's.

The bottom line is that the LG cam is great N/A and it LOVES nitrous.

Vince

03-27-2011, 09:48 AM	#52
Prochargedchevyi Drives: 2010 Camaro 2SS/RS Join Date: Aug 2010 Location: Castle Rock, Colorado Posts: 153	FWIW the G6X3 is a great cam if it's used with the correct supporting mods. I think you'll pick up at least 40+rwhp by going with the long tubes. Just make sure you get a 7/8 primary and not a 3/4. No sense in spending the money and not getting the full potential out of the setup. I installed the same cam in a vette for a client in Florida and with headers, ported TB, CAI, and Fast intake he made 500rwhp. With Nitrous he pushed over 700rwhp and ran low 10's. The bottom line is that the LG cam is great N/A and it LOVES nitrous. Vince __________________ "This house is protected by the good Lord and a gun. You'll meet both if you show up uninvited."