Quote:
Originally Posted by Gene Culley
I installed the cup holder lighting in my 2SS over the weekend. It cost all of about $60 and all plug and play. I got a splitter (wiring harness) from Ofer here on the board. It tied into my 4 pack gauge harness and had two plugs for the GM LED's. I bought a 5 pack of LED holders from Radio Shack and drilled 2 holes and put the LED holders in there and put the GM LED's in from the back and it is done!
|
Its not hard at all all you need for the lighting is the GM LED's remove the black holders and by the Radio Shack LED holders and drill 2 holes and that is it.
Quote:
Originally Posted by Alain
i could have sworn i read somewhere on this forum that GM is going to be releasing the foot well lighting
|
I think it was in the new synergy cars coming out that the cup holders and foot well lighting comes in.