GM Accessory cup holder lighting. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MikeJrSS · 03-27-2011, 07:47 PM

I've searched the thread about cup holder lighting and everything is about how to DIY. I'm curious if anyone has pictures of the GM Accessory ABL which includes the footwells and cup holders. I've seen pictures from the red flash concept but they really don't focus on the ABL lighting. It would be cool if someone had some pics out there. I'm assuming its just a plug and play which would be great and would be something I'm interested in. The part # is 20971891 if anyone was curious.

The Stig · 03-27-2011, 07:55 PM

Quote:

Originally Posted by MikeJrSS

I've searched the thread about cup holder lighting and everything is about how to DIY. I'm curious if anyone has pictures of the GM Accessory ABL which includes the footwells and cup holders. I've seen pictures from the red flash concept but they really don't focus on the ABL lighting. It would be cool if someone had some pics out there. I'm assuming its just a plug and play which would be great and would be something I'm interested in. The part # is 20971891 if anyone was curious.

Sorry to be the one to break the news but GM never started production of the footwell/cup holder ambient lighting. DIY is really the only route if you're looking to have those mods.

awesum x · 03-27-2011, 08:07 PM

I'm curious about this also. Guess I could have the dealer install this.

FL1CK · 03-27-2011, 08:36 PM

Please read post #2

first one · 03-27-2011, 09:05 PM

I don't know about cup holder lighting, but that's a nice looking car you got there! Looks familiar!

Gene Culley · 03-29-2011, 09:01 PM

I installed the cup holder lighting in my 2SS over the weekend. It cost all of about $60 and all plug and play. I got a splitter (wiring harness) from Ofer here on the board. It tied into my 4 pack gauge harness and had two plugs for the GM LED's. I bought a 5 pack of LED holders from Radio Shack and drilled 2 holes and put the LED holders in there and put the GM LED's in from the back and it is done!

Alain · 03-29-2011, 09:18 PM

i could have sworn i read somewhere on this forum that GM is going to be releasing the foot well lighting

2SSRS@Gen5diy · 03-29-2011, 10:04 PM

Quote:

Originally Posted by Gene Culley

I installed the cup holder lighting in my 2SS over the weekend. It cost all of about $60 and all plug and play. I got a splitter (wiring harness) from Ofer here on the board. It tied into my 4 pack gauge harness and had two plugs for the GM LED's. I bought a 5 pack of LED holders from Radio Shack and drilled 2 holes and put the LED holders in there and put the GM LED's in from the back and it is done!

Its not hard at all all you need for the lighting is the GM LED's remove the black holders and by the Radio Shack LED holders and drill 2 holes and that is it.

Quote:

Originally Posted by Alain

i could have sworn i read somewhere on this forum that GM is going to be releasing the foot well lighting

I think it was in the new synergy cars coming out that the cup holders and foot well lighting comes in.

Alfieboy · 03-29-2011, 10:07 PM

where are ya drilling the holes and mounting leds ..? any pics?

Jabs · 03-29-2011, 10:09 PM

Quote:

Originally Posted by Alfieboy

where are ya drilling the holes and mounting leds ..? any pics?

+1

2SSRS@Gen5diy · 03-29-2011, 10:16 PM

If you want some pics all you need to do is ask.

scoobeepsk · 03-29-2011, 10:58 PM

wow

Gene Culley · 04-01-2011, 11:28 PM

I did mine differently than Ofer. I tested a bottle in the cup holder areas and it seemed to me as if the bottle would always scrape or even break the LED. I mounted/drilled one on each side of the area in between the actual cup holders. I'll post pics this weekend hopefully. I got my whole upper console painted IOM so these LED's really set it off.

2SSRS@Gen5diy · 04-02-2011, 12:41 AM

Quote:

Originally Posted by Gene Culley

I did mine differently than Ofer. I tested a bottle in the cup holder areas and it seemed to me as if the bottle would always scrape or even break the LED. I mounted/drilled one on each side of the area in between the actual cup holders. I'll post pics this weekend hopefully. I got my whole upper console painted IOM so these LED's really set it off.

What i did to fix that was take a file to the head of the LED and made it flat so its almost flush with the holder.

03-27-2011, 07:47 PM	#1
MikeJrSS Drives: Black 2011 2SS/RS LS3 Join Date: Jan 2011 Location: Orlando, FL Posts: 192	GM Accessory cup holder lighting. I've searched the thread about cup holder lighting and everything is about how to DIY. I'm curious if anyone has pictures of the GM Accessory ABL which includes the footwells and cup holders. I've seen pictures from the red flash concept but they really don't focus on the ABL lighting. It would be cool if someone had some pics out there. I'm assuming its just a plug and play which would be great and would be something I'm interested in. The part # is 20971891 if anyone was curious.

03-27-2011, 09:05 PM	#5
first one Drives: SSRS - black, GFX, SSX wheels Join Date: Aug 2009 Location: IN Posts: 936	I don't know about cup holder lighting, but that's a nice looking car you got there! Looks familiar! __________________

03-29-2011, 10:16 PM	#11
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	If you want some pics all you need to do is ask. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cup Holder LED lighting	Don O	Cosmetics and Lighting Modification Discussions	63	02-10-2017 10:20 AM
Installed full dash and doors ABL, foot lighting with custom cup holder switch plate!	CamaroC-17	Camaro Photos \| Spyshots \| Video \| Media Gallery	23	02-06-2013 09:45 PM
Z28 PRICE!? check this out!!!	BigBlock427	Camaro ZL1 Forum - ZL1 Specific Topics	287	10-23-2010 01:41 PM
cup holder lighting	bmwdon	Cosmetics and Lighting Modification Discussions	47	10-10-2010 12:36 AM
Billet Cup Holder Insert Polished, Satin or Black Anodized!!!	BilletCustom	Interior Parts & Accessories	20	01-10-2010 09:41 PM

03-27-2011, 08:07 PM	#3
awesum x Drives: 2011 Camaro 2LT RS Join Date: Oct 2010 Location: Cleveland, Ohio Posts: 38	I'm curious about this also. Guess I could have the dealer install this.

03-27-2011, 08:36 PM	#4
FL1CK Switchin' n Twitchin' Drives: 2011 Camaro Join Date: Nov 2010 Location: Chula Vista, CA (Eastlake) Posts: 3,145	Please read post #2

03-29-2011, 09:01 PM	#6
Gene Culley Account Suspended Drives: 2013 SS Join Date: Dec 2009 Location: Boyertown, PA Posts: 1,374	I installed the cup holder lighting in my 2SS over the weekend. It cost all of about $60 and all plug and play. I got a splitter (wiring harness) from Ofer here on the board. It tied into my 4 pack gauge harness and had two plugs for the GM LED's. I bought a 5 pack of LED holders from Radio Shack and drilled 2 holes and put the LED holders in there and put the GM LED's in from the back and it is done!

03-29-2011, 09:18 PM	#7
Alain Drives: 2016 Challenger Hellcat, 2018 ZL1LE Join Date: Dec 2009 Location: Northern NJ Posts: 3,003	i could have sworn i read somewhere on this forum that GM is going to be releasing the foot well lighting

03-29-2011, 10:07 PM	#9
Alfieboy Madman Drives: 2017 1SS Join Date: Jun 2009 Location: RICHMOND VA Posts: 1,405 View My Garage	where are ya drilling the holes and mounting leds ..? any pics?

03-29-2011, 10:58 PM	#12
scoobeepsk Drives: 2010 RS GroundFX CUSTOM WHEELS Join Date: Oct 2010 Location: DFW Posts: 18	wow

04-01-2011, 11:28 PM	#13
Gene Culley Account Suspended Drives: 2013 SS Join Date: Dec 2009 Location: Boyertown, PA Posts: 1,374	I did mine differently than Ofer. I tested a bottle in the cup holder areas and it seemed to me as if the bottle would always scrape or even break the LED. I mounted/drilled one on each side of the area in between the actual cup holders. I'll post pics this weekend hopefully. I got my whole upper console painted IOM so these LED's really set it off.