Quote:
Originally Posted by jeff4946
On the rear stock fitting(with PVC tube pulled off) you will see a fitting with a tiny hole on top. That hole is to small to evacuate the crankcase vapors as is. It needs to either be drilled out to a larger hole( which is what I did), or it needs to be wrenched off and replaced with any 1/4 inch threaded elbow( as long as it isnt PVC), you can get at home depot(usually in the pnuematic tool isle) you want. But as is, that hole is too small.
|
I went out there and looked just now. I guess I am blind I dont see the fitting you are referring to. All I see is the PCV valve back there with the hose attached to it. Do you have a pic of it?