Quote:
Originally Posted by 2010camarolt
i have a welded flange on the headers so i just have to weld a flange on the cat pipe(dont know the real name for it) and then they will bolt together
|
Are we talking JBA's here. If so, be sure you mock those up very well before you tack weld them in place. If not perfectly true- they will leak.
JBA provides no gasket and just a "v-clamp" to hold the two pipes together.
My advice (if you've got JBA) is to cut the flat flange off the header and weld a real exhaust flange to it and the mid-pipe (cat pipe) before final assembly. It can save you alot of headaches.
