Quote:
Originally Posted by AdamZ
You guys are bickering over tires 
Thanks for the info both of you. I will definitely check everything out.
Any chance you guys could link me to something since you probably have a better idea of what I need.
I will be putting them on the rear specifically for drags. When I am done I will be ptuuing the pirellis back on. |
Forget these two bozos...I think they might be in love.
If you are going to use them for a strip only application and want to run your regular radials on the street then I would definitely go ET streets. They hook the best but are a terrible tire out on the street...any rain will put you in the ditch unless you slow down to a crawl and they won't wear very well.....but if you are willing to change them over to race then they hook the best.
Ninja edit: Jamie is right...go with 18s as the wheel choices are dirt cheap. Most people use Corvette wheels.
Ninja edit #2: If you are going to run your regular radials in the front then think twice about running the bias ply version of ET Streets.....mixing radials and bias can give you a squirrely ride on the big end. Many have done it, but be prepared if that's the route you go.
Good luck.