|
The instructions from RiderGraphix state the stripe should be 6.5 inches apart. This is the exact spacing at the windshield. There is no way you could install them 6.5 all the way down the hood as the stripes would start to form a V shape, and would be much less straight and parallel. I was present for the wet install, and when they were laid 6.5 all the way is was ghastly. This was the only way to make them look semi-presentable. And as Rogue said, it just looks strange the way they seperate and curve. It isnt correct.
I can add a pic of the back stripe, but its just of the two deck stripes. As I mentioned, the spoiler stripes would not install as they were over an inch wider than the deck stripe, and there was NO way they could be installed so that they lined up correctly with the deck stripe. Trust me, we spent a long time trying. And they obviously were manufactured wrongly, as when I asked RiderGraphix about it, he admitted they had to "re-measure" a car and would send me modified replacement stripes. So he knew they were not sized properly...
|