Thanks
. I was really pleased with how they came out. Yes, the brake and clutch "just" slip on. The old covers slip off pretty easily they are much more maliable than the new ones. The new ones are tighter, stiffer, and need some finagling. I used a heat gun to soften the rubber and a screw driver to pry the upper lip up and over the actually pedal during the install. I have read some folks bake the pedals in an oven first to soften them up. My finger tips are a little sore from the process of pushing and pulling on the tough and very warm material, but I'll survive
.
The accelerator is as stated, a few bolts (3 actually) and a wiring harness. WAY easier than the brake and clutch pedals
. Unbolt it, drop it down, pop the harness, snap harness into new pedal, bolt back to the floor. Wha-la.