Quote:
Originally Posted by Lio Martinez
I been checking different websites for prices and I was luck enough to find a website where the seats and harness from Sparco are 10% cheaper
http://speed-freaks.net
Found the Evo 2 seats for $720 instead of the usual $825. And the 6 point harness for $323. Instead of $360.
I'm still deciding if I will get the RPM roll cage
http://rpmrollbar.com
The Brey-Krause harness bar
http://www.mtiracing.com/brey-krause...en-camaro.html
Or the Speedware harness
http://www.speedwaremotorsports.com/...ess-bar?page=1
If I use any harness bar I will need tank plates to support the harness . If I use the roll cage I will need two seat belt kits that RPM sells.
The only trouble I see ahead of this project is the disabling of the air bags because of the removal of the front seats. |
A 1k ohm resistor should be enough to trick the air bag computer into thinking the seat airbags are there and keep everything active.