OK, started today doing the heater hose relocation kit and removing the insulation from the firewall in prep for the super charger install.
The firewall insulation is NOT on the ZL1 so it will need to be removed:
The heater hose relocation kit is from JDP and I followed these steps:
http://www.camaro5.com/forums/showthread.php?t=183191
Insulation:
Firewall:
My only change was to route behind my B&M Transmission Dip Stick tube:
Hose kit (I reused the clamps from the old hose):
With the headers out of the way, I was able to get to the bolts easily:
@ this point I removed the EVAP Line:
And covered it...
Now to install the relo kit. I used this grease:
in the hoses:
Then installed the relo kit:
Getting the lifters, pushrods, head bolts, gaskets and heads ready! But first, one more cleaning...
-Don